File: | lib/CodeGen/MachinePipeliner.cpp |
Warning: | line 2748, column 11 Value stored to 'NewReg' is never read |
Press '?' to see keyboard shortcuts
Keyboard shortcuts:
1 | //===- MachinePipeliner.cpp - Machine Software Pipeliner Pass -------------===// |
2 | // |
3 | // The LLVM Compiler Infrastructure |
4 | // |
5 | // This file is distributed under the University of Illinois Open Source |
6 | // License. See LICENSE.TXT for details. |
7 | // |
8 | //===----------------------------------------------------------------------===// |
9 | // |
10 | // An implementation of the Swing Modulo Scheduling (SMS) software pipeliner. |
11 | // |
12 | // Software pipelining (SWP) is an instruction scheduling technique for loops |
13 | // that overlap loop iterations and exploits ILP via a compiler transformation. |
14 | // |
15 | // Swing Modulo Scheduling is an implementation of software pipelining |
16 | // that generates schedules that are near optimal in terms of initiation |
17 | // interval, register requirements, and stage count. See the papers: |
18 | // |
19 | // "Swing Modulo Scheduling: A Lifetime-Sensitive Approach", by J. Llosa, |
20 | // A. Gonzalez, E. Ayguade, and M. Valero. In PACT '96 Proceedings of the 1996 |
21 | // Conference on Parallel Architectures and Compilation Techiniques. |
22 | // |
23 | // "Lifetime-Sensitive Modulo Scheduling in a Production Environment", by J. |
24 | // Llosa, E. Ayguade, A. Gonzalez, M. Valero, and J. Eckhardt. In IEEE |
25 | // Transactions on Computers, Vol. 50, No. 3, 2001. |
26 | // |
27 | // "An Implementation of Swing Modulo Scheduling With Extensions for |
28 | // Superblocks", by T. Lattner, Master's Thesis, University of Illinois at |
29 | // Urbana-Chambpain, 2005. |
30 | // |
31 | // |
32 | // The SMS algorithm consists of three main steps after computing the minimal |
33 | // initiation interval (MII). |
34 | // 1) Analyze the dependence graph and compute information about each |
35 | // instruction in the graph. |
36 | // 2) Order the nodes (instructions) by priority based upon the heuristics |
37 | // described in the algorithm. |
38 | // 3) Attempt to schedule the nodes in the specified order using the MII. |
39 | // |
40 | // This SMS implementation is a target-independent back-end pass. When enabled, |
41 | // the pass runs just prior to the register allocation pass, while the machine |
42 | // IR is in SSA form. If software pipelining is successful, then the original |
43 | // loop is replaced by the optimized loop. The optimized loop contains one or |
44 | // more prolog blocks, the pipelined kernel, and one or more epilog blocks. If |
45 | // the instructions cannot be scheduled in a given MII, we increase the MII by |
46 | // one and try again. |
47 | // |
48 | // The SMS implementation is an extension of the ScheduleDAGInstrs class. We |
49 | // represent loop carried dependences in the DAG as order edges to the Phi |
50 | // nodes. We also perform several passes over the DAG to eliminate unnecessary |
51 | // edges that inhibit the ability to pipeline. The implementation uses the |
52 | // DFAPacketizer class to compute the minimum initiation interval and the check |
53 | // where an instruction may be inserted in the pipelined schedule. |
54 | // |
55 | // In order for the SMS pass to work, several target specific hooks need to be |
56 | // implemented to get information about the loop structure and to rewrite |
57 | // instructions. |
58 | // |
59 | //===----------------------------------------------------------------------===// |
60 | |
61 | #include "llvm/ADT/ArrayRef.h" |
62 | #include "llvm/ADT/BitVector.h" |
63 | #include "llvm/ADT/DenseMap.h" |
64 | #include "llvm/ADT/MapVector.h" |
65 | #include "llvm/ADT/PriorityQueue.h" |
66 | #include "llvm/ADT/SetVector.h" |
67 | #include "llvm/ADT/SmallPtrSet.h" |
68 | #include "llvm/ADT/SmallSet.h" |
69 | #include "llvm/ADT/SmallVector.h" |
70 | #include "llvm/ADT/Statistic.h" |
71 | #include "llvm/ADT/iterator_range.h" |
72 | #include "llvm/Analysis/AliasAnalysis.h" |
73 | #include "llvm/Analysis/MemoryLocation.h" |
74 | #include "llvm/Analysis/ValueTracking.h" |
75 | #include "llvm/CodeGen/DFAPacketizer.h" |
76 | #include "llvm/CodeGen/LiveIntervals.h" |
77 | #include "llvm/CodeGen/MachineBasicBlock.h" |
78 | #include "llvm/CodeGen/MachineDominators.h" |
79 | #include "llvm/CodeGen/MachineFunction.h" |
80 | #include "llvm/CodeGen/MachineFunctionPass.h" |
81 | #include "llvm/CodeGen/MachineInstr.h" |
82 | #include "llvm/CodeGen/MachineInstrBuilder.h" |
83 | #include "llvm/CodeGen/MachineLoopInfo.h" |
84 | #include "llvm/CodeGen/MachineMemOperand.h" |
85 | #include "llvm/CodeGen/MachineOperand.h" |
86 | #include "llvm/CodeGen/MachineRegisterInfo.h" |
87 | #include "llvm/CodeGen/RegisterClassInfo.h" |
88 | #include "llvm/CodeGen/RegisterPressure.h" |
89 | #include "llvm/CodeGen/ScheduleDAG.h" |
90 | #include "llvm/CodeGen/ScheduleDAGInstrs.h" |
91 | #include "llvm/CodeGen/ScheduleDAGMutation.h" |
92 | #include "llvm/CodeGen/TargetInstrInfo.h" |
93 | #include "llvm/CodeGen/TargetOpcodes.h" |
94 | #include "llvm/CodeGen/TargetRegisterInfo.h" |
95 | #include "llvm/CodeGen/TargetSubtargetInfo.h" |
96 | #include "llvm/Config/llvm-config.h" |
97 | #include "llvm/IR/Attributes.h" |
98 | #include "llvm/IR/DebugLoc.h" |
99 | #include "llvm/IR/Function.h" |
100 | #include "llvm/MC/LaneBitmask.h" |
101 | #include "llvm/MC/MCInstrDesc.h" |
102 | #include "llvm/MC/MCInstrItineraries.h" |
103 | #include "llvm/MC/MCRegisterInfo.h" |
104 | #include "llvm/Pass.h" |
105 | #include "llvm/Support/CommandLine.h" |
106 | #include "llvm/Support/Compiler.h" |
107 | #include "llvm/Support/Debug.h" |
108 | #include "llvm/Support/MathExtras.h" |
109 | #include "llvm/Support/raw_ostream.h" |
110 | #include <algorithm> |
111 | #include <cassert> |
112 | #include <climits> |
113 | #include <cstdint> |
114 | #include <deque> |
115 | #include <functional> |
116 | #include <iterator> |
117 | #include <map> |
118 | #include <memory> |
119 | #include <tuple> |
120 | #include <utility> |
121 | #include <vector> |
122 | |
123 | using namespace llvm; |
124 | |
125 | #define DEBUG_TYPE"pipeliner" "pipeliner" |
126 | |
127 | STATISTIC(NumTrytoPipeline, "Number of loops that we attempt to pipeline")static llvm::Statistic NumTrytoPipeline = {"pipeliner", "NumTrytoPipeline" , "Number of loops that we attempt to pipeline", {0}, {false} }; |
128 | STATISTIC(NumPipelined, "Number of loops software pipelined")static llvm::Statistic NumPipelined = {"pipeliner", "NumPipelined" , "Number of loops software pipelined", {0}, {false}}; |
129 | STATISTIC(NumNodeOrderIssues, "Number of node order issues found")static llvm::Statistic NumNodeOrderIssues = {"pipeliner", "NumNodeOrderIssues" , "Number of node order issues found", {0}, {false}}; |
130 | |
131 | /// A command line option to turn software pipelining on or off. |
132 | static cl::opt<bool> EnableSWP("enable-pipeliner", cl::Hidden, cl::init(true), |
133 | cl::ZeroOrMore, |
134 | cl::desc("Enable Software Pipelining")); |
135 | |
136 | /// A command line option to enable SWP at -Os. |
137 | static cl::opt<bool> EnableSWPOptSize("enable-pipeliner-opt-size", |
138 | cl::desc("Enable SWP at Os."), cl::Hidden, |
139 | cl::init(false)); |
140 | |
141 | /// A command line argument to limit minimum initial interval for pipelining. |
142 | static cl::opt<int> SwpMaxMii("pipeliner-max-mii", |
143 | cl::desc("Size limit for the MII."), |
144 | cl::Hidden, cl::init(27)); |
145 | |
146 | /// A command line argument to limit the number of stages in the pipeline. |
147 | static cl::opt<int> |
148 | SwpMaxStages("pipeliner-max-stages", |
149 | cl::desc("Maximum stages allowed in the generated scheduled."), |
150 | cl::Hidden, cl::init(3)); |
151 | |
152 | /// A command line option to disable the pruning of chain dependences due to |
153 | /// an unrelated Phi. |
154 | static cl::opt<bool> |
155 | SwpPruneDeps("pipeliner-prune-deps", |
156 | cl::desc("Prune dependences between unrelated Phi nodes."), |
157 | cl::Hidden, cl::init(true)); |
158 | |
159 | /// A command line option to disable the pruning of loop carried order |
160 | /// dependences. |
161 | static cl::opt<bool> |
162 | SwpPruneLoopCarried("pipeliner-prune-loop-carried", |
163 | cl::desc("Prune loop carried order dependences."), |
164 | cl::Hidden, cl::init(true)); |
165 | |
166 | #ifndef NDEBUG |
167 | static cl::opt<int> SwpLoopLimit("pipeliner-max", cl::Hidden, cl::init(-1)); |
168 | #endif |
169 | |
170 | static cl::opt<bool> SwpIgnoreRecMII("pipeliner-ignore-recmii", |
171 | cl::ReallyHidden, cl::init(false), |
172 | cl::ZeroOrMore, cl::desc("Ignore RecMII")); |
173 | |
174 | namespace { |
175 | |
176 | class NodeSet; |
177 | class SMSchedule; |
178 | |
179 | /// The main class in the implementation of the target independent |
180 | /// software pipeliner pass. |
181 | class MachinePipeliner : public MachineFunctionPass { |
182 | public: |
183 | MachineFunction *MF = nullptr; |
184 | const MachineLoopInfo *MLI = nullptr; |
185 | const MachineDominatorTree *MDT = nullptr; |
186 | const InstrItineraryData *InstrItins; |
187 | const TargetInstrInfo *TII = nullptr; |
188 | RegisterClassInfo RegClassInfo; |
189 | |
190 | #ifndef NDEBUG |
191 | static int NumTries; |
192 | #endif |
193 | |
194 | /// Cache the target analysis information about the loop. |
195 | struct LoopInfo { |
196 | MachineBasicBlock *TBB = nullptr; |
197 | MachineBasicBlock *FBB = nullptr; |
198 | SmallVector<MachineOperand, 4> BrCond; |
199 | MachineInstr *LoopInductionVar = nullptr; |
200 | MachineInstr *LoopCompare = nullptr; |
201 | }; |
202 | LoopInfo LI; |
203 | |
204 | static char ID; |
205 | |
206 | MachinePipeliner() : MachineFunctionPass(ID) { |
207 | initializeMachinePipelinerPass(*PassRegistry::getPassRegistry()); |
208 | } |
209 | |
210 | bool runOnMachineFunction(MachineFunction &MF) override; |
211 | |
212 | void getAnalysisUsage(AnalysisUsage &AU) const override { |
213 | AU.addRequired<AAResultsWrapperPass>(); |
214 | AU.addPreserved<AAResultsWrapperPass>(); |
215 | AU.addRequired<MachineLoopInfo>(); |
216 | AU.addRequired<MachineDominatorTree>(); |
217 | AU.addRequired<LiveIntervals>(); |
218 | MachineFunctionPass::getAnalysisUsage(AU); |
219 | } |
220 | |
221 | private: |
222 | void preprocessPhiNodes(MachineBasicBlock &B); |
223 | bool canPipelineLoop(MachineLoop &L); |
224 | bool scheduleLoop(MachineLoop &L); |
225 | bool swingModuloScheduler(MachineLoop &L); |
226 | }; |
227 | |
228 | /// This class builds the dependence graph for the instructions in a loop, |
229 | /// and attempts to schedule the instructions using the SMS algorithm. |
230 | class SwingSchedulerDAG : public ScheduleDAGInstrs { |
231 | MachinePipeliner &Pass; |
232 | /// The minimum initiation interval between iterations for this schedule. |
233 | unsigned MII = 0; |
234 | /// Set to true if a valid pipelined schedule is found for the loop. |
235 | bool Scheduled = false; |
236 | MachineLoop &Loop; |
237 | LiveIntervals &LIS; |
238 | const RegisterClassInfo &RegClassInfo; |
239 | |
240 | /// A toplogical ordering of the SUnits, which is needed for changing |
241 | /// dependences and iterating over the SUnits. |
242 | ScheduleDAGTopologicalSort Topo; |
243 | |
244 | struct NodeInfo { |
245 | int ASAP = 0; |
246 | int ALAP = 0; |
247 | int ZeroLatencyDepth = 0; |
248 | int ZeroLatencyHeight = 0; |
249 | |
250 | NodeInfo() = default; |
251 | }; |
252 | /// Computed properties for each node in the graph. |
253 | std::vector<NodeInfo> ScheduleInfo; |
254 | |
255 | enum OrderKind { BottomUp = 0, TopDown = 1 }; |
256 | /// Computed node ordering for scheduling. |
257 | SetVector<SUnit *> NodeOrder; |
258 | |
259 | using NodeSetType = SmallVector<NodeSet, 8>; |
260 | using ValueMapTy = DenseMap<unsigned, unsigned>; |
261 | using MBBVectorTy = SmallVectorImpl<MachineBasicBlock *>; |
262 | using InstrMapTy = DenseMap<MachineInstr *, MachineInstr *>; |
263 | |
264 | /// Instructions to change when emitting the final schedule. |
265 | DenseMap<SUnit *, std::pair<unsigned, int64_t>> InstrChanges; |
266 | |
267 | /// We may create a new instruction, so remember it because it |
268 | /// must be deleted when the pass is finished. |
269 | SmallPtrSet<MachineInstr *, 4> NewMIs; |
270 | |
271 | /// Ordered list of DAG postprocessing steps. |
272 | std::vector<std::unique_ptr<ScheduleDAGMutation>> Mutations; |
273 | |
274 | /// Helper class to implement Johnson's circuit finding algorithm. |
275 | class Circuits { |
276 | std::vector<SUnit> &SUnits; |
277 | SetVector<SUnit *> Stack; |
278 | BitVector Blocked; |
279 | SmallVector<SmallPtrSet<SUnit *, 4>, 10> B; |
280 | SmallVector<SmallVector<int, 4>, 16> AdjK; |
281 | unsigned NumPaths; |
282 | static unsigned MaxPaths; |
283 | |
284 | public: |
285 | Circuits(std::vector<SUnit> &SUs) |
286 | : SUnits(SUs), Blocked(SUs.size()), B(SUs.size()), AdjK(SUs.size()) {} |
287 | |
288 | /// Reset the data structures used in the circuit algorithm. |
289 | void reset() { |
290 | Stack.clear(); |
291 | Blocked.reset(); |
292 | B.assign(SUnits.size(), SmallPtrSet<SUnit *, 4>()); |
293 | NumPaths = 0; |
294 | } |
295 | |
296 | void createAdjacencyStructure(SwingSchedulerDAG *DAG); |
297 | bool circuit(int V, int S, NodeSetType &NodeSets, bool HasBackedge = false); |
298 | void unblock(int U); |
299 | }; |
300 | |
301 | public: |
302 | SwingSchedulerDAG(MachinePipeliner &P, MachineLoop &L, LiveIntervals &lis, |
303 | const RegisterClassInfo &rci) |
304 | : ScheduleDAGInstrs(*P.MF, P.MLI, false), Pass(P), Loop(L), LIS(lis), |
305 | RegClassInfo(rci), Topo(SUnits, &ExitSU) { |
306 | P.MF->getSubtarget().getSMSMutations(Mutations); |
307 | } |
308 | |
309 | void schedule() override; |
310 | void finishBlock() override; |
311 | |
312 | /// Return true if the loop kernel has been scheduled. |
313 | bool hasNewSchedule() { return Scheduled; } |
314 | |
315 | /// Return the earliest time an instruction may be scheduled. |
316 | int getASAP(SUnit *Node) { return ScheduleInfo[Node->NodeNum].ASAP; } |
317 | |
318 | /// Return the latest time an instruction my be scheduled. |
319 | int getALAP(SUnit *Node) { return ScheduleInfo[Node->NodeNum].ALAP; } |
320 | |
321 | /// The mobility function, which the number of slots in which |
322 | /// an instruction may be scheduled. |
323 | int getMOV(SUnit *Node) { return getALAP(Node) - getASAP(Node); } |
324 | |
325 | /// The depth, in the dependence graph, for a node. |
326 | unsigned getDepth(SUnit *Node) { return Node->getDepth(); } |
327 | |
328 | /// The maximum unweighted length of a path from an arbitrary node to the |
329 | /// given node in which each edge has latency 0 |
330 | int getZeroLatencyDepth(SUnit *Node) { |
331 | return ScheduleInfo[Node->NodeNum].ZeroLatencyDepth; |
332 | } |
333 | |
334 | /// The height, in the dependence graph, for a node. |
335 | unsigned getHeight(SUnit *Node) { return Node->getHeight(); } |
336 | |
337 | /// The maximum unweighted length of a path from the given node to an |
338 | /// arbitrary node in which each edge has latency 0 |
339 | int getZeroLatencyHeight(SUnit *Node) { |
340 | return ScheduleInfo[Node->NodeNum].ZeroLatencyHeight; |
341 | } |
342 | |
343 | /// Return true if the dependence is a back-edge in the data dependence graph. |
344 | /// Since the DAG doesn't contain cycles, we represent a cycle in the graph |
345 | /// using an anti dependence from a Phi to an instruction. |
346 | bool isBackedge(SUnit *Source, const SDep &Dep) { |
347 | if (Dep.getKind() != SDep::Anti) |
348 | return false; |
349 | return Source->getInstr()->isPHI() || Dep.getSUnit()->getInstr()->isPHI(); |
350 | } |
351 | |
352 | bool isLoopCarriedDep(SUnit *Source, const SDep &Dep, bool isSucc = true); |
353 | |
354 | /// The distance function, which indicates that operation V of iteration I |
355 | /// depends on operations U of iteration I-distance. |
356 | unsigned getDistance(SUnit *U, SUnit *V, const SDep &Dep) { |
357 | // Instructions that feed a Phi have a distance of 1. Computing larger |
358 | // values for arrays requires data dependence information. |
359 | if (V->getInstr()->isPHI() && Dep.getKind() == SDep::Anti) |
360 | return 1; |
361 | return 0; |
362 | } |
363 | |
364 | /// Set the Minimum Initiation Interval for this schedule attempt. |
365 | void setMII(unsigned mii) { MII = mii; } |
366 | |
367 | void applyInstrChange(MachineInstr *MI, SMSchedule &Schedule); |
368 | |
369 | void fixupRegisterOverlaps(std::deque<SUnit *> &Instrs); |
370 | |
371 | /// Return the new base register that was stored away for the changed |
372 | /// instruction. |
373 | unsigned getInstrBaseReg(SUnit *SU) { |
374 | DenseMap<SUnit *, std::pair<unsigned, int64_t>>::iterator It = |
375 | InstrChanges.find(SU); |
376 | if (It != InstrChanges.end()) |
377 | return It->second.first; |
378 | return 0; |
379 | } |
380 | |
381 | void addMutation(std::unique_ptr<ScheduleDAGMutation> Mutation) { |
382 | Mutations.push_back(std::move(Mutation)); |
383 | } |
384 | |
385 | private: |
386 | void addLoopCarriedDependences(AliasAnalysis *AA); |
387 | void updatePhiDependences(); |
388 | void changeDependences(); |
389 | unsigned calculateResMII(); |
390 | unsigned calculateRecMII(NodeSetType &RecNodeSets); |
391 | void findCircuits(NodeSetType &NodeSets); |
392 | void fuseRecs(NodeSetType &NodeSets); |
393 | void removeDuplicateNodes(NodeSetType &NodeSets); |
394 | void computeNodeFunctions(NodeSetType &NodeSets); |
395 | void registerPressureFilter(NodeSetType &NodeSets); |
396 | void colocateNodeSets(NodeSetType &NodeSets); |
397 | void checkNodeSets(NodeSetType &NodeSets); |
398 | void groupRemainingNodes(NodeSetType &NodeSets); |
399 | void addConnectedNodes(SUnit *SU, NodeSet &NewSet, |
400 | SetVector<SUnit *> &NodesAdded); |
401 | void computeNodeOrder(NodeSetType &NodeSets); |
402 | void checkValidNodeOrder(const NodeSetType &Circuits) const; |
403 | bool schedulePipeline(SMSchedule &Schedule); |
404 | void generatePipelinedLoop(SMSchedule &Schedule); |
405 | void generateProlog(SMSchedule &Schedule, unsigned LastStage, |
406 | MachineBasicBlock *KernelBB, ValueMapTy *VRMap, |
407 | MBBVectorTy &PrologBBs); |
408 | void generateEpilog(SMSchedule &Schedule, unsigned LastStage, |
409 | MachineBasicBlock *KernelBB, ValueMapTy *VRMap, |
410 | MBBVectorTy &EpilogBBs, MBBVectorTy &PrologBBs); |
411 | void generateExistingPhis(MachineBasicBlock *NewBB, MachineBasicBlock *BB1, |
412 | MachineBasicBlock *BB2, MachineBasicBlock *KernelBB, |
413 | SMSchedule &Schedule, ValueMapTy *VRMap, |
414 | InstrMapTy &InstrMap, unsigned LastStageNum, |
415 | unsigned CurStageNum, bool IsLast); |
416 | void generatePhis(MachineBasicBlock *NewBB, MachineBasicBlock *BB1, |
417 | MachineBasicBlock *BB2, MachineBasicBlock *KernelBB, |
418 | SMSchedule &Schedule, ValueMapTy *VRMap, |
419 | InstrMapTy &InstrMap, unsigned LastStageNum, |
420 | unsigned CurStageNum, bool IsLast); |
421 | void removeDeadInstructions(MachineBasicBlock *KernelBB, |
422 | MBBVectorTy &EpilogBBs); |
423 | void splitLifetimes(MachineBasicBlock *KernelBB, MBBVectorTy &EpilogBBs, |
424 | SMSchedule &Schedule); |
425 | void addBranches(MBBVectorTy &PrologBBs, MachineBasicBlock *KernelBB, |
426 | MBBVectorTy &EpilogBBs, SMSchedule &Schedule, |
427 | ValueMapTy *VRMap); |
428 | bool computeDelta(MachineInstr &MI, unsigned &Delta); |
429 | void updateMemOperands(MachineInstr &NewMI, MachineInstr &OldMI, |
430 | unsigned Num); |
431 | MachineInstr *cloneInstr(MachineInstr *OldMI, unsigned CurStageNum, |
432 | unsigned InstStageNum); |
433 | MachineInstr *cloneAndChangeInstr(MachineInstr *OldMI, unsigned CurStageNum, |
434 | unsigned InstStageNum, |
435 | SMSchedule &Schedule); |
436 | void updateInstruction(MachineInstr *NewMI, bool LastDef, |
437 | unsigned CurStageNum, unsigned InstrStageNum, |
438 | SMSchedule &Schedule, ValueMapTy *VRMap); |
439 | MachineInstr *findDefInLoop(unsigned Reg); |
440 | unsigned getPrevMapVal(unsigned StageNum, unsigned PhiStage, unsigned LoopVal, |
441 | unsigned LoopStage, ValueMapTy *VRMap, |
442 | MachineBasicBlock *BB); |
443 | void rewritePhiValues(MachineBasicBlock *NewBB, unsigned StageNum, |
444 | SMSchedule &Schedule, ValueMapTy *VRMap, |
445 | InstrMapTy &InstrMap); |
446 | void rewriteScheduledInstr(MachineBasicBlock *BB, SMSchedule &Schedule, |
447 | InstrMapTy &InstrMap, unsigned CurStageNum, |
448 | unsigned PhiNum, MachineInstr *Phi, |
449 | unsigned OldReg, unsigned NewReg, |
450 | unsigned PrevReg = 0); |
451 | bool canUseLastOffsetValue(MachineInstr *MI, unsigned &BasePos, |
452 | unsigned &OffsetPos, unsigned &NewBase, |
453 | int64_t &NewOffset); |
454 | void postprocessDAG(); |
455 | }; |
456 | |
457 | /// A NodeSet contains a set of SUnit DAG nodes with additional information |
458 | /// that assigns a priority to the set. |
459 | class NodeSet { |
460 | SetVector<SUnit *> Nodes; |
461 | bool HasRecurrence = false; |
462 | unsigned RecMII = 0; |
463 | int MaxMOV = 0; |
464 | unsigned MaxDepth = 0; |
465 | unsigned Colocate = 0; |
466 | SUnit *ExceedPressure = nullptr; |
467 | unsigned Latency = 0; |
468 | |
469 | public: |
470 | using iterator = SetVector<SUnit *>::const_iterator; |
471 | |
472 | NodeSet() = default; |
473 | NodeSet(iterator S, iterator E) : Nodes(S, E), HasRecurrence(true) { |
474 | Latency = 0; |
475 | for (unsigned i = 0, e = Nodes.size(); i < e; ++i) |
476 | for (const SDep &Succ : Nodes[i]->Succs) |
477 | if (Nodes.count(Succ.getSUnit())) |
478 | Latency += Succ.getLatency(); |
479 | } |
480 | |
481 | bool insert(SUnit *SU) { return Nodes.insert(SU); } |
482 | |
483 | void insert(iterator S, iterator E) { Nodes.insert(S, E); } |
484 | |
485 | template <typename UnaryPredicate> bool remove_if(UnaryPredicate P) { |
486 | return Nodes.remove_if(P); |
487 | } |
488 | |
489 | unsigned count(SUnit *SU) const { return Nodes.count(SU); } |
490 | |
491 | bool hasRecurrence() { return HasRecurrence; }; |
492 | |
493 | unsigned size() const { return Nodes.size(); } |
494 | |
495 | bool empty() const { return Nodes.empty(); } |
496 | |
497 | SUnit *getNode(unsigned i) const { return Nodes[i]; }; |
498 | |
499 | void setRecMII(unsigned mii) { RecMII = mii; }; |
500 | |
501 | void setColocate(unsigned c) { Colocate = c; }; |
502 | |
503 | void setExceedPressure(SUnit *SU) { ExceedPressure = SU; } |
504 | |
505 | bool isExceedSU(SUnit *SU) { return ExceedPressure == SU; } |
506 | |
507 | int compareRecMII(NodeSet &RHS) { return RecMII - RHS.RecMII; } |
508 | |
509 | int getRecMII() { return RecMII; } |
510 | |
511 | /// Summarize node functions for the entire node set. |
512 | void computeNodeSetInfo(SwingSchedulerDAG *SSD) { |
513 | for (SUnit *SU : *this) { |
514 | MaxMOV = std::max(MaxMOV, SSD->getMOV(SU)); |
515 | MaxDepth = std::max(MaxDepth, SSD->getDepth(SU)); |
516 | } |
517 | } |
518 | |
519 | unsigned getLatency() { return Latency; } |
520 | |
521 | unsigned getMaxDepth() { return MaxDepth; } |
522 | |
523 | void clear() { |
524 | Nodes.clear(); |
525 | RecMII = 0; |
526 | HasRecurrence = false; |
527 | MaxMOV = 0; |
528 | MaxDepth = 0; |
529 | Colocate = 0; |
530 | ExceedPressure = nullptr; |
531 | } |
532 | |
533 | operator SetVector<SUnit *> &() { return Nodes; } |
534 | |
535 | /// Sort the node sets by importance. First, rank them by recurrence MII, |
536 | /// then by mobility (least mobile done first), and finally by depth. |
537 | /// Each node set may contain a colocate value which is used as the first |
538 | /// tie breaker, if it's set. |
539 | bool operator>(const NodeSet &RHS) const { |
540 | if (RecMII == RHS.RecMII) { |
541 | if (Colocate != 0 && RHS.Colocate != 0 && Colocate != RHS.Colocate) |
542 | return Colocate < RHS.Colocate; |
543 | if (MaxMOV == RHS.MaxMOV) |
544 | return MaxDepth > RHS.MaxDepth; |
545 | return MaxMOV < RHS.MaxMOV; |
546 | } |
547 | return RecMII > RHS.RecMII; |
548 | } |
549 | |
550 | bool operator==(const NodeSet &RHS) const { |
551 | return RecMII == RHS.RecMII && MaxMOV == RHS.MaxMOV && |
552 | MaxDepth == RHS.MaxDepth; |
553 | } |
554 | |
555 | bool operator!=(const NodeSet &RHS) const { return !operator==(RHS); } |
556 | |
557 | iterator begin() { return Nodes.begin(); } |
558 | iterator end() { return Nodes.end(); } |
559 | |
560 | void print(raw_ostream &os) const { |
561 | os << "Num nodes " << size() << " rec " << RecMII << " mov " << MaxMOV |
562 | << " depth " << MaxDepth << " col " << Colocate << "\n"; |
563 | for (const auto &I : Nodes) |
564 | os << " SU(" << I->NodeNum << ") " << *(I->getInstr()); |
565 | os << "\n"; |
566 | } |
567 | |
568 | #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) |
569 | LLVM_DUMP_METHOD__attribute__((noinline)) __attribute__((__used__)) void dump() const { print(dbgs()); } |
570 | #endif |
571 | }; |
572 | |
573 | /// This class represents the scheduled code. The main data structure is a |
574 | /// map from scheduled cycle to instructions. During scheduling, the |
575 | /// data structure explicitly represents all stages/iterations. When |
576 | /// the algorithm finshes, the schedule is collapsed into a single stage, |
577 | /// which represents instructions from different loop iterations. |
578 | /// |
579 | /// The SMS algorithm allows negative values for cycles, so the first cycle |
580 | /// in the schedule is the smallest cycle value. |
581 | class SMSchedule { |
582 | private: |
583 | /// Map from execution cycle to instructions. |
584 | DenseMap<int, std::deque<SUnit *>> ScheduledInstrs; |
585 | |
586 | /// Map from instruction to execution cycle. |
587 | std::map<SUnit *, int> InstrToCycle; |
588 | |
589 | /// Map for each register and the max difference between its uses and def. |
590 | /// The first element in the pair is the max difference in stages. The |
591 | /// second is true if the register defines a Phi value and loop value is |
592 | /// scheduled before the Phi. |
593 | std::map<unsigned, std::pair<unsigned, bool>> RegToStageDiff; |
594 | |
595 | /// Keep track of the first cycle value in the schedule. It starts |
596 | /// as zero, but the algorithm allows negative values. |
597 | int FirstCycle = 0; |
598 | |
599 | /// Keep track of the last cycle value in the schedule. |
600 | int LastCycle = 0; |
601 | |
602 | /// The initiation interval (II) for the schedule. |
603 | int InitiationInterval = 0; |
604 | |
605 | /// Target machine information. |
606 | const TargetSubtargetInfo &ST; |
607 | |
608 | /// Virtual register information. |
609 | MachineRegisterInfo &MRI; |
610 | |
611 | std::unique_ptr<DFAPacketizer> Resources; |
612 | |
613 | public: |
614 | SMSchedule(MachineFunction *mf) |
615 | : ST(mf->getSubtarget()), MRI(mf->getRegInfo()), |
616 | Resources(ST.getInstrInfo()->CreateTargetScheduleState(ST)) {} |
617 | |
618 | void reset() { |
619 | ScheduledInstrs.clear(); |
620 | InstrToCycle.clear(); |
621 | RegToStageDiff.clear(); |
622 | FirstCycle = 0; |
623 | LastCycle = 0; |
624 | InitiationInterval = 0; |
625 | } |
626 | |
627 | /// Set the initiation interval for this schedule. |
628 | void setInitiationInterval(int ii) { InitiationInterval = ii; } |
629 | |
630 | /// Return the first cycle in the completed schedule. This |
631 | /// can be a negative value. |
632 | int getFirstCycle() const { return FirstCycle; } |
633 | |
634 | /// Return the last cycle in the finalized schedule. |
635 | int getFinalCycle() const { return FirstCycle + InitiationInterval - 1; } |
636 | |
637 | /// Return the cycle of the earliest scheduled instruction in the dependence |
638 | /// chain. |
639 | int earliestCycleInChain(const SDep &Dep); |
640 | |
641 | /// Return the cycle of the latest scheduled instruction in the dependence |
642 | /// chain. |
643 | int latestCycleInChain(const SDep &Dep); |
644 | |
645 | void computeStart(SUnit *SU, int *MaxEarlyStart, int *MinLateStart, |
646 | int *MinEnd, int *MaxStart, int II, SwingSchedulerDAG *DAG); |
647 | bool insert(SUnit *SU, int StartCycle, int EndCycle, int II); |
648 | |
649 | /// Iterators for the cycle to instruction map. |
650 | using sched_iterator = DenseMap<int, std::deque<SUnit *>>::iterator; |
651 | using const_sched_iterator = |
652 | DenseMap<int, std::deque<SUnit *>>::const_iterator; |
653 | |
654 | /// Return true if the instruction is scheduled at the specified stage. |
655 | bool isScheduledAtStage(SUnit *SU, unsigned StageNum) { |
656 | return (stageScheduled(SU) == (int)StageNum); |
657 | } |
658 | |
659 | /// Return the stage for a scheduled instruction. Return -1 if |
660 | /// the instruction has not been scheduled. |
661 | int stageScheduled(SUnit *SU) const { |
662 | std::map<SUnit *, int>::const_iterator it = InstrToCycle.find(SU); |
663 | if (it == InstrToCycle.end()) |
664 | return -1; |
665 | return (it->second - FirstCycle) / InitiationInterval; |
666 | } |
667 | |
668 | /// Return the cycle for a scheduled instruction. This function normalizes |
669 | /// the first cycle to be 0. |
670 | unsigned cycleScheduled(SUnit *SU) const { |
671 | std::map<SUnit *, int>::const_iterator it = InstrToCycle.find(SU); |
672 | assert(it != InstrToCycle.end() && "Instruction hasn't been scheduled.")(static_cast <bool> (it != InstrToCycle.end() && "Instruction hasn't been scheduled.") ? void (0) : __assert_fail ("it != InstrToCycle.end() && \"Instruction hasn't been scheduled.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 672, __extension__ __PRETTY_FUNCTION__)); |
673 | return (it->second - FirstCycle) % InitiationInterval; |
674 | } |
675 | |
676 | /// Return the maximum stage count needed for this schedule. |
677 | unsigned getMaxStageCount() { |
678 | return (LastCycle - FirstCycle) / InitiationInterval; |
679 | } |
680 | |
681 | /// Return the max. number of stages/iterations that can occur between a |
682 | /// register definition and its uses. |
683 | unsigned getStagesForReg(int Reg, unsigned CurStage) { |
684 | std::pair<unsigned, bool> Stages = RegToStageDiff[Reg]; |
685 | if (CurStage > getMaxStageCount() && Stages.first == 0 && Stages.second) |
686 | return 1; |
687 | return Stages.first; |
688 | } |
689 | |
690 | /// The number of stages for a Phi is a little different than other |
691 | /// instructions. The minimum value computed in RegToStageDiff is 1 |
692 | /// because we assume the Phi is needed for at least 1 iteration. |
693 | /// This is not the case if the loop value is scheduled prior to the |
694 | /// Phi in the same stage. This function returns the number of stages |
695 | /// or iterations needed between the Phi definition and any uses. |
696 | unsigned getStagesForPhi(int Reg) { |
697 | std::pair<unsigned, bool> Stages = RegToStageDiff[Reg]; |
698 | if (Stages.second) |
699 | return Stages.first; |
700 | return Stages.first - 1; |
701 | } |
702 | |
703 | /// Return the instructions that are scheduled at the specified cycle. |
704 | std::deque<SUnit *> &getInstructions(int cycle) { |
705 | return ScheduledInstrs[cycle]; |
706 | } |
707 | |
708 | bool isValidSchedule(SwingSchedulerDAG *SSD); |
709 | void finalizeSchedule(SwingSchedulerDAG *SSD); |
710 | void orderDependence(SwingSchedulerDAG *SSD, SUnit *SU, |
711 | std::deque<SUnit *> &Insts); |
712 | bool isLoopCarried(SwingSchedulerDAG *SSD, MachineInstr &Phi); |
713 | bool isLoopCarriedDefOfUse(SwingSchedulerDAG *SSD, MachineInstr *Def, |
714 | MachineOperand &MO); |
715 | void print(raw_ostream &os) const; |
716 | void dump() const; |
717 | }; |
718 | |
719 | } // end anonymous namespace |
720 | |
721 | unsigned SwingSchedulerDAG::Circuits::MaxPaths = 5; |
722 | char MachinePipeliner::ID = 0; |
723 | #ifndef NDEBUG |
724 | int MachinePipeliner::NumTries = 0; |
725 | #endif |
726 | char &llvm::MachinePipelinerID = MachinePipeliner::ID; |
727 | |
728 | INITIALIZE_PASS_BEGIN(MachinePipeliner, DEBUG_TYPE,static void *initializeMachinePipelinerPassOnce(PassRegistry & Registry) { |
729 | "Modulo Software Pipelining", false, false)static void *initializeMachinePipelinerPassOnce(PassRegistry & Registry) { |
730 | INITIALIZE_PASS_DEPENDENCY(AAResultsWrapperPass)initializeAAResultsWrapperPassPass(Registry); |
731 | INITIALIZE_PASS_DEPENDENCY(MachineLoopInfo)initializeMachineLoopInfoPass(Registry); |
732 | INITIALIZE_PASS_DEPENDENCY(MachineDominatorTree)initializeMachineDominatorTreePass(Registry); |
733 | INITIALIZE_PASS_DEPENDENCY(LiveIntervals)initializeLiveIntervalsPass(Registry); |
734 | INITIALIZE_PASS_END(MachinePipeliner, DEBUG_TYPE,PassInfo *PI = new PassInfo( "Modulo Software Pipelining", "pipeliner" , &MachinePipeliner::ID, PassInfo::NormalCtor_t(callDefaultCtor <MachinePipeliner>), false, false); Registry.registerPass (*PI, true); return PI; } static llvm::once_flag InitializeMachinePipelinerPassFlag ; void llvm::initializeMachinePipelinerPass(PassRegistry & Registry) { llvm::call_once(InitializeMachinePipelinerPassFlag , initializeMachinePipelinerPassOnce, std::ref(Registry)); } |
735 | "Modulo Software Pipelining", false, false)PassInfo *PI = new PassInfo( "Modulo Software Pipelining", "pipeliner" , &MachinePipeliner::ID, PassInfo::NormalCtor_t(callDefaultCtor <MachinePipeliner>), false, false); Registry.registerPass (*PI, true); return PI; } static llvm::once_flag InitializeMachinePipelinerPassFlag ; void llvm::initializeMachinePipelinerPass(PassRegistry & Registry) { llvm::call_once(InitializeMachinePipelinerPassFlag , initializeMachinePipelinerPassOnce, std::ref(Registry)); } |
736 | |
737 | /// The "main" function for implementing Swing Modulo Scheduling. |
738 | bool MachinePipeliner::runOnMachineFunction(MachineFunction &mf) { |
739 | if (skipFunction(mf.getFunction())) |
740 | return false; |
741 | |
742 | if (!EnableSWP) |
743 | return false; |
744 | |
745 | if (mf.getFunction().getAttributes().hasAttribute( |
746 | AttributeList::FunctionIndex, Attribute::OptimizeForSize) && |
747 | !EnableSWPOptSize.getPosition()) |
748 | return false; |
749 | |
750 | MF = &mf; |
751 | MLI = &getAnalysis<MachineLoopInfo>(); |
752 | MDT = &getAnalysis<MachineDominatorTree>(); |
753 | TII = MF->getSubtarget().getInstrInfo(); |
754 | RegClassInfo.runOnMachineFunction(*MF); |
755 | |
756 | for (auto &L : *MLI) |
757 | scheduleLoop(*L); |
758 | |
759 | return false; |
760 | } |
761 | |
762 | /// Attempt to perform the SMS algorithm on the specified loop. This function is |
763 | /// the main entry point for the algorithm. The function identifies candidate |
764 | /// loops, calculates the minimum initiation interval, and attempts to schedule |
765 | /// the loop. |
766 | bool MachinePipeliner::scheduleLoop(MachineLoop &L) { |
767 | bool Changed = false; |
768 | for (auto &InnerLoop : L) |
769 | Changed |= scheduleLoop(*InnerLoop); |
770 | |
771 | #ifndef NDEBUG |
772 | // Stop trying after reaching the limit (if any). |
773 | int Limit = SwpLoopLimit; |
774 | if (Limit >= 0) { |
775 | if (NumTries >= SwpLoopLimit) |
776 | return Changed; |
777 | NumTries++; |
778 | } |
779 | #endif |
780 | |
781 | if (!canPipelineLoop(L)) |
782 | return Changed; |
783 | |
784 | ++NumTrytoPipeline; |
785 | |
786 | Changed = swingModuloScheduler(L); |
787 | |
788 | return Changed; |
789 | } |
790 | |
791 | /// Return true if the loop can be software pipelined. The algorithm is |
792 | /// restricted to loops with a single basic block. Make sure that the |
793 | /// branch in the loop can be analyzed. |
794 | bool MachinePipeliner::canPipelineLoop(MachineLoop &L) { |
795 | if (L.getNumBlocks() != 1) |
796 | return false; |
797 | |
798 | // Check if the branch can't be understood because we can't do pipelining |
799 | // if that's the case. |
800 | LI.TBB = nullptr; |
801 | LI.FBB = nullptr; |
802 | LI.BrCond.clear(); |
803 | if (TII->analyzeBranch(*L.getHeader(), LI.TBB, LI.FBB, LI.BrCond)) |
804 | return false; |
805 | |
806 | LI.LoopInductionVar = nullptr; |
807 | LI.LoopCompare = nullptr; |
808 | if (TII->analyzeLoop(L, LI.LoopInductionVar, LI.LoopCompare)) |
809 | return false; |
810 | |
811 | if (!L.getLoopPreheader()) |
812 | return false; |
813 | |
814 | // Remove any subregisters from inputs to phi nodes. |
815 | preprocessPhiNodes(*L.getHeader()); |
816 | return true; |
817 | } |
818 | |
819 | void MachinePipeliner::preprocessPhiNodes(MachineBasicBlock &B) { |
820 | MachineRegisterInfo &MRI = MF->getRegInfo(); |
821 | SlotIndexes &Slots = *getAnalysis<LiveIntervals>().getSlotIndexes(); |
822 | |
823 | for (MachineInstr &PI : make_range(B.begin(), B.getFirstNonPHI())) { |
824 | MachineOperand &DefOp = PI.getOperand(0); |
825 | assert(DefOp.getSubReg() == 0)(static_cast <bool> (DefOp.getSubReg() == 0) ? void (0) : __assert_fail ("DefOp.getSubReg() == 0", "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 825, __extension__ __PRETTY_FUNCTION__)); |
826 | auto *RC = MRI.getRegClass(DefOp.getReg()); |
827 | |
828 | for (unsigned i = 1, n = PI.getNumOperands(); i != n; i += 2) { |
829 | MachineOperand &RegOp = PI.getOperand(i); |
830 | if (RegOp.getSubReg() == 0) |
831 | continue; |
832 | |
833 | // If the operand uses a subregister, replace it with a new register |
834 | // without subregisters, and generate a copy to the new register. |
835 | unsigned NewReg = MRI.createVirtualRegister(RC); |
836 | MachineBasicBlock &PredB = *PI.getOperand(i+1).getMBB(); |
837 | MachineBasicBlock::iterator At = PredB.getFirstTerminator(); |
838 | const DebugLoc &DL = PredB.findDebugLoc(At); |
839 | auto Copy = BuildMI(PredB, At, DL, TII->get(TargetOpcode::COPY), NewReg) |
840 | .addReg(RegOp.getReg(), getRegState(RegOp), |
841 | RegOp.getSubReg()); |
842 | Slots.insertMachineInstrInMaps(*Copy); |
843 | RegOp.setReg(NewReg); |
844 | RegOp.setSubReg(0); |
845 | } |
846 | } |
847 | } |
848 | |
849 | /// The SMS algorithm consists of the following main steps: |
850 | /// 1. Computation and analysis of the dependence graph. |
851 | /// 2. Ordering of the nodes (instructions). |
852 | /// 3. Attempt to Schedule the loop. |
853 | bool MachinePipeliner::swingModuloScheduler(MachineLoop &L) { |
854 | assert(L.getBlocks().size() == 1 && "SMS works on single blocks only.")(static_cast <bool> (L.getBlocks().size() == 1 && "SMS works on single blocks only.") ? void (0) : __assert_fail ("L.getBlocks().size() == 1 && \"SMS works on single blocks only.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 854, __extension__ __PRETTY_FUNCTION__)); |
855 | |
856 | SwingSchedulerDAG SMS(*this, L, getAnalysis<LiveIntervals>(), RegClassInfo); |
857 | |
858 | MachineBasicBlock *MBB = L.getHeader(); |
859 | // The kernel should not include any terminator instructions. These |
860 | // will be added back later. |
861 | SMS.startBlock(MBB); |
862 | |
863 | // Compute the number of 'real' instructions in the basic block by |
864 | // ignoring terminators. |
865 | unsigned size = MBB->size(); |
866 | for (MachineBasicBlock::iterator I = MBB->getFirstTerminator(), |
867 | E = MBB->instr_end(); |
868 | I != E; ++I, --size) |
869 | ; |
870 | |
871 | SMS.enterRegion(MBB, MBB->begin(), MBB->getFirstTerminator(), size); |
872 | SMS.schedule(); |
873 | SMS.exitRegion(); |
874 | |
875 | SMS.finishBlock(); |
876 | return SMS.hasNewSchedule(); |
877 | } |
878 | |
879 | /// We override the schedule function in ScheduleDAGInstrs to implement the |
880 | /// scheduling part of the Swing Modulo Scheduling algorithm. |
881 | void SwingSchedulerDAG::schedule() { |
882 | AliasAnalysis *AA = &Pass.getAnalysis<AAResultsWrapperPass>().getAAResults(); |
883 | buildSchedGraph(AA); |
884 | addLoopCarriedDependences(AA); |
885 | updatePhiDependences(); |
886 | Topo.InitDAGTopologicalSorting(); |
887 | postprocessDAG(); |
888 | changeDependences(); |
889 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned su = 0, e = SUnits.size(); su != e; ++su) SUnits[su].dumpAll(this); }; } } while (false) |
890 | for (unsigned su = 0, e = SUnits.size(); su != e; ++su)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned su = 0, e = SUnits.size(); su != e; ++su) SUnits[su].dumpAll(this); }; } } while (false) |
891 | SUnits[su].dumpAll(this);do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned su = 0, e = SUnits.size(); su != e; ++su) SUnits[su].dumpAll(this); }; } } while (false) |
892 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned su = 0, e = SUnits.size(); su != e; ++su) SUnits[su].dumpAll(this); }; } } while (false); |
893 | |
894 | NodeSetType NodeSets; |
895 | findCircuits(NodeSets); |
896 | NodeSetType Circuits = NodeSets; |
897 | |
898 | // Calculate the MII. |
899 | unsigned ResMII = calculateResMII(); |
900 | unsigned RecMII = calculateRecMII(NodeSets); |
901 | |
902 | fuseRecs(NodeSets); |
903 | |
904 | // This flag is used for testing and can cause correctness problems. |
905 | if (SwpIgnoreRecMII) |
906 | RecMII = 0; |
907 | |
908 | MII = std::max(ResMII, RecMII); |
909 | LLVM_DEBUG(dbgs() << "MII = " << MII << " (rec=" << RecMIIdo { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "MII = " << MII << " (rec=" << RecMII << ", res=" << ResMII << ")\n"; } } while (false) |
910 | << ", res=" << ResMII << ")\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "MII = " << MII << " (rec=" << RecMII << ", res=" << ResMII << ")\n"; } } while (false); |
911 | |
912 | // Can't schedule a loop without a valid MII. |
913 | if (MII == 0) |
914 | return; |
915 | |
916 | // Don't pipeline large loops. |
917 | if (SwpMaxMii != -1 && (int)MII > SwpMaxMii) |
918 | return; |
919 | |
920 | computeNodeFunctions(NodeSets); |
921 | |
922 | registerPressureFilter(NodeSets); |
923 | |
924 | colocateNodeSets(NodeSets); |
925 | |
926 | checkNodeSets(NodeSets); |
927 | |
928 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false) |
929 | for (auto &I : NodeSets) {do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false) |
930 | dbgs() << " Rec NodeSet ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false) |
931 | I.dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false) |
932 | }do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false) |
933 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " Rec NodeSet "; I.dump(); } }; } } while (false); |
934 | |
935 | std::stable_sort(NodeSets.begin(), NodeSets.end(), std::greater<NodeSet>()); |
936 | |
937 | groupRemainingNodes(NodeSets); |
938 | |
939 | removeDuplicateNodes(NodeSets); |
940 | |
941 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false) |
942 | for (auto &I : NodeSets) {do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false) |
943 | dbgs() << " NodeSet ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false) |
944 | I.dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false) |
945 | }do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false) |
946 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (auto &I : NodeSets) { dbgs() << " NodeSet "; I.dump(); } }; } } while (false); |
947 | |
948 | computeNodeOrder(NodeSets); |
949 | |
950 | // check for node order issues |
951 | checkValidNodeOrder(Circuits); |
952 | |
953 | SMSchedule Schedule(Pass.MF); |
954 | Scheduled = schedulePipeline(Schedule); |
955 | |
956 | if (!Scheduled) |
957 | return; |
958 | |
959 | unsigned numStages = Schedule.getMaxStageCount(); |
960 | // No need to generate pipeline if there are no overlapped iterations. |
961 | if (numStages == 0) |
962 | return; |
963 | |
964 | // Check that the maximum stage count is less than user-defined limit. |
965 | if (SwpMaxStages > -1 && (int)numStages > SwpMaxStages) |
966 | return; |
967 | |
968 | generatePipelinedLoop(Schedule); |
969 | ++NumPipelined; |
970 | } |
971 | |
972 | /// Clean up after the software pipeliner runs. |
973 | void SwingSchedulerDAG::finishBlock() { |
974 | for (MachineInstr *I : NewMIs) |
975 | MF.DeleteMachineInstr(I); |
976 | NewMIs.clear(); |
977 | |
978 | // Call the superclass. |
979 | ScheduleDAGInstrs::finishBlock(); |
980 | } |
981 | |
982 | /// Return the register values for the operands of a Phi instruction. |
983 | /// This function assume the instruction is a Phi. |
984 | static void getPhiRegs(MachineInstr &Phi, MachineBasicBlock *Loop, |
985 | unsigned &InitVal, unsigned &LoopVal) { |
986 | assert(Phi.isPHI() && "Expecting a Phi.")(static_cast <bool> (Phi.isPHI() && "Expecting a Phi." ) ? void (0) : __assert_fail ("Phi.isPHI() && \"Expecting a Phi.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 986, __extension__ __PRETTY_FUNCTION__)); |
987 | |
988 | InitVal = 0; |
989 | LoopVal = 0; |
990 | for (unsigned i = 1, e = Phi.getNumOperands(); i != e; i += 2) |
991 | if (Phi.getOperand(i + 1).getMBB() != Loop) |
992 | InitVal = Phi.getOperand(i).getReg(); |
993 | else |
994 | LoopVal = Phi.getOperand(i).getReg(); |
995 | |
996 | assert(InitVal != 0 && LoopVal != 0 && "Unexpected Phi structure.")(static_cast <bool> (InitVal != 0 && LoopVal != 0 && "Unexpected Phi structure.") ? void (0) : __assert_fail ("InitVal != 0 && LoopVal != 0 && \"Unexpected Phi structure.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 996, __extension__ __PRETTY_FUNCTION__)); |
997 | } |
998 | |
999 | /// Return the Phi register value that comes from the incoming block. |
1000 | static unsigned getInitPhiReg(MachineInstr &Phi, MachineBasicBlock *LoopBB) { |
1001 | for (unsigned i = 1, e = Phi.getNumOperands(); i != e; i += 2) |
1002 | if (Phi.getOperand(i + 1).getMBB() != LoopBB) |
1003 | return Phi.getOperand(i).getReg(); |
1004 | return 0; |
1005 | } |
1006 | |
1007 | /// Return the Phi register value that comes the loop block. |
1008 | static unsigned getLoopPhiReg(MachineInstr &Phi, MachineBasicBlock *LoopBB) { |
1009 | for (unsigned i = 1, e = Phi.getNumOperands(); i != e; i += 2) |
1010 | if (Phi.getOperand(i + 1).getMBB() == LoopBB) |
1011 | return Phi.getOperand(i).getReg(); |
1012 | return 0; |
1013 | } |
1014 | |
1015 | /// Return true if SUb can be reached from SUa following the chain edges. |
1016 | static bool isSuccOrder(SUnit *SUa, SUnit *SUb) { |
1017 | SmallPtrSet<SUnit *, 8> Visited; |
1018 | SmallVector<SUnit *, 8> Worklist; |
1019 | Worklist.push_back(SUa); |
1020 | while (!Worklist.empty()) { |
1021 | const SUnit *SU = Worklist.pop_back_val(); |
1022 | for (auto &SI : SU->Succs) { |
1023 | SUnit *SuccSU = SI.getSUnit(); |
1024 | if (SI.getKind() == SDep::Order) { |
1025 | if (Visited.count(SuccSU)) |
1026 | continue; |
1027 | if (SuccSU == SUb) |
1028 | return true; |
1029 | Worklist.push_back(SuccSU); |
1030 | Visited.insert(SuccSU); |
1031 | } |
1032 | } |
1033 | } |
1034 | return false; |
1035 | } |
1036 | |
1037 | /// Return true if the instruction causes a chain between memory |
1038 | /// references before and after it. |
1039 | static bool isDependenceBarrier(MachineInstr &MI, AliasAnalysis *AA) { |
1040 | return MI.isCall() || MI.hasUnmodeledSideEffects() || |
1041 | (MI.hasOrderedMemoryRef() && |
1042 | (!MI.mayLoad() || !MI.isDereferenceableInvariantLoad(AA))); |
1043 | } |
1044 | |
1045 | /// Return the underlying objects for the memory references of an instruction. |
1046 | /// This function calls the code in ValueTracking, but first checks that the |
1047 | /// instruction has a memory operand. |
1048 | static void getUnderlyingObjects(MachineInstr *MI, |
1049 | SmallVectorImpl<Value *> &Objs, |
1050 | const DataLayout &DL) { |
1051 | if (!MI->hasOneMemOperand()) |
1052 | return; |
1053 | MachineMemOperand *MM = *MI->memoperands_begin(); |
1054 | if (!MM->getValue()) |
1055 | return; |
1056 | GetUnderlyingObjects(const_cast<Value *>(MM->getValue()), Objs, DL); |
1057 | for (Value *V : Objs) { |
1058 | if (!isIdentifiedObject(V)) { |
1059 | Objs.clear(); |
1060 | return; |
1061 | } |
1062 | Objs.push_back(V); |
1063 | } |
1064 | } |
1065 | |
1066 | /// Add a chain edge between a load and store if the store can be an |
1067 | /// alias of the load on a subsequent iteration, i.e., a loop carried |
1068 | /// dependence. This code is very similar to the code in ScheduleDAGInstrs |
1069 | /// but that code doesn't create loop carried dependences. |
1070 | void SwingSchedulerDAG::addLoopCarriedDependences(AliasAnalysis *AA) { |
1071 | MapVector<Value *, SmallVector<SUnit *, 4>> PendingLoads; |
1072 | Value *UnknownValue = |
1073 | UndefValue::get(Type::getVoidTy(MF.getFunction().getContext())); |
1074 | for (auto &SU : SUnits) { |
1075 | MachineInstr &MI = *SU.getInstr(); |
1076 | if (isDependenceBarrier(MI, AA)) |
1077 | PendingLoads.clear(); |
1078 | else if (MI.mayLoad()) { |
1079 | SmallVector<Value *, 4> Objs; |
1080 | getUnderlyingObjects(&MI, Objs, MF.getDataLayout()); |
1081 | if (Objs.empty()) |
1082 | Objs.push_back(UnknownValue); |
1083 | for (auto V : Objs) { |
1084 | SmallVector<SUnit *, 4> &SUs = PendingLoads[V]; |
1085 | SUs.push_back(&SU); |
1086 | } |
1087 | } else if (MI.mayStore()) { |
1088 | SmallVector<Value *, 4> Objs; |
1089 | getUnderlyingObjects(&MI, Objs, MF.getDataLayout()); |
1090 | if (Objs.empty()) |
1091 | Objs.push_back(UnknownValue); |
1092 | for (auto V : Objs) { |
1093 | MapVector<Value *, SmallVector<SUnit *, 4>>::iterator I = |
1094 | PendingLoads.find(V); |
1095 | if (I == PendingLoads.end()) |
1096 | continue; |
1097 | for (auto Load : I->second) { |
1098 | if (isSuccOrder(Load, &SU)) |
1099 | continue; |
1100 | MachineInstr &LdMI = *Load->getInstr(); |
1101 | // First, perform the cheaper check that compares the base register. |
1102 | // If they are the same and the load offset is less than the store |
1103 | // offset, then mark the dependence as loop carried potentially. |
1104 | unsigned BaseReg1, BaseReg2; |
1105 | int64_t Offset1, Offset2; |
1106 | if (TII->getMemOpBaseRegImmOfs(LdMI, BaseReg1, Offset1, TRI) && |
1107 | TII->getMemOpBaseRegImmOfs(MI, BaseReg2, Offset2, TRI)) { |
1108 | if (BaseReg1 == BaseReg2 && (int)Offset1 < (int)Offset2) { |
1109 | assert(TII->areMemAccessesTriviallyDisjoint(LdMI, MI, AA) &&(static_cast <bool> (TII->areMemAccessesTriviallyDisjoint (LdMI, MI, AA) && "What happened to the chain edge?") ? void (0) : __assert_fail ("TII->areMemAccessesTriviallyDisjoint(LdMI, MI, AA) && \"What happened to the chain edge?\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 1110, __extension__ __PRETTY_FUNCTION__)) |
1110 | "What happened to the chain edge?")(static_cast <bool> (TII->areMemAccessesTriviallyDisjoint (LdMI, MI, AA) && "What happened to the chain edge?") ? void (0) : __assert_fail ("TII->areMemAccessesTriviallyDisjoint(LdMI, MI, AA) && \"What happened to the chain edge?\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 1110, __extension__ __PRETTY_FUNCTION__)); |
1111 | SDep Dep(Load, SDep::Barrier); |
1112 | Dep.setLatency(1); |
1113 | SU.addPred(Dep); |
1114 | continue; |
1115 | } |
1116 | } |
1117 | // Second, the more expensive check that uses alias analysis on the |
1118 | // base registers. If they alias, and the load offset is less than |
1119 | // the store offset, the mark the dependence as loop carried. |
1120 | if (!AA) { |
1121 | SDep Dep(Load, SDep::Barrier); |
1122 | Dep.setLatency(1); |
1123 | SU.addPred(Dep); |
1124 | continue; |
1125 | } |
1126 | MachineMemOperand *MMO1 = *LdMI.memoperands_begin(); |
1127 | MachineMemOperand *MMO2 = *MI.memoperands_begin(); |
1128 | if (!MMO1->getValue() || !MMO2->getValue()) { |
1129 | SDep Dep(Load, SDep::Barrier); |
1130 | Dep.setLatency(1); |
1131 | SU.addPred(Dep); |
1132 | continue; |
1133 | } |
1134 | if (MMO1->getValue() == MMO2->getValue() && |
1135 | MMO1->getOffset() <= MMO2->getOffset()) { |
1136 | SDep Dep(Load, SDep::Barrier); |
1137 | Dep.setLatency(1); |
1138 | SU.addPred(Dep); |
1139 | continue; |
1140 | } |
1141 | AliasResult AAResult = AA->alias( |
1142 | MemoryLocation(MMO1->getValue(), MemoryLocation::UnknownSize, |
1143 | MMO1->getAAInfo()), |
1144 | MemoryLocation(MMO2->getValue(), MemoryLocation::UnknownSize, |
1145 | MMO2->getAAInfo())); |
1146 | |
1147 | if (AAResult != NoAlias) { |
1148 | SDep Dep(Load, SDep::Barrier); |
1149 | Dep.setLatency(1); |
1150 | SU.addPred(Dep); |
1151 | } |
1152 | } |
1153 | } |
1154 | } |
1155 | } |
1156 | } |
1157 | |
1158 | /// Update the phi dependences to the DAG because ScheduleDAGInstrs no longer |
1159 | /// processes dependences for PHIs. This function adds true dependences |
1160 | /// from a PHI to a use, and a loop carried dependence from the use to the |
1161 | /// PHI. The loop carried dependence is represented as an anti dependence |
1162 | /// edge. This function also removes chain dependences between unrelated |
1163 | /// PHIs. |
1164 | void SwingSchedulerDAG::updatePhiDependences() { |
1165 | SmallVector<SDep, 4> RemoveDeps; |
1166 | const TargetSubtargetInfo &ST = MF.getSubtarget<TargetSubtargetInfo>(); |
1167 | |
1168 | // Iterate over each DAG node. |
1169 | for (SUnit &I : SUnits) { |
1170 | RemoveDeps.clear(); |
1171 | // Set to true if the instruction has an operand defined by a Phi. |
1172 | unsigned HasPhiUse = 0; |
1173 | unsigned HasPhiDef = 0; |
1174 | MachineInstr *MI = I.getInstr(); |
1175 | // Iterate over each operand, and we process the definitions. |
1176 | for (MachineInstr::mop_iterator MOI = MI->operands_begin(), |
1177 | MOE = MI->operands_end(); |
1178 | MOI != MOE; ++MOI) { |
1179 | if (!MOI->isReg()) |
1180 | continue; |
1181 | unsigned Reg = MOI->getReg(); |
1182 | if (MOI->isDef()) { |
1183 | // If the register is used by a Phi, then create an anti dependence. |
1184 | for (MachineRegisterInfo::use_instr_iterator |
1185 | UI = MRI.use_instr_begin(Reg), |
1186 | UE = MRI.use_instr_end(); |
1187 | UI != UE; ++UI) { |
1188 | MachineInstr *UseMI = &*UI; |
1189 | SUnit *SU = getSUnit(UseMI); |
1190 | if (SU != nullptr && UseMI->isPHI()) { |
1191 | if (!MI->isPHI()) { |
1192 | SDep Dep(SU, SDep::Anti, Reg); |
1193 | Dep.setLatency(1); |
1194 | I.addPred(Dep); |
1195 | } else { |
1196 | HasPhiDef = Reg; |
1197 | // Add a chain edge to a dependent Phi that isn't an existing |
1198 | // predecessor. |
1199 | if (SU->NodeNum < I.NodeNum && !I.isPred(SU)) |
1200 | I.addPred(SDep(SU, SDep::Barrier)); |
1201 | } |
1202 | } |
1203 | } |
1204 | } else if (MOI->isUse()) { |
1205 | // If the register is defined by a Phi, then create a true dependence. |
1206 | MachineInstr *DefMI = MRI.getUniqueVRegDef(Reg); |
1207 | if (DefMI == nullptr) |
1208 | continue; |
1209 | SUnit *SU = getSUnit(DefMI); |
1210 | if (SU != nullptr && DefMI->isPHI()) { |
1211 | if (!MI->isPHI()) { |
1212 | SDep Dep(SU, SDep::Data, Reg); |
1213 | Dep.setLatency(0); |
1214 | ST.adjustSchedDependency(SU, &I, Dep); |
1215 | I.addPred(Dep); |
1216 | } else { |
1217 | HasPhiUse = Reg; |
1218 | // Add a chain edge to a dependent Phi that isn't an existing |
1219 | // predecessor. |
1220 | if (SU->NodeNum < I.NodeNum && !I.isPred(SU)) |
1221 | I.addPred(SDep(SU, SDep::Barrier)); |
1222 | } |
1223 | } |
1224 | } |
1225 | } |
1226 | // Remove order dependences from an unrelated Phi. |
1227 | if (!SwpPruneDeps) |
1228 | continue; |
1229 | for (auto &PI : I.Preds) { |
1230 | MachineInstr *PMI = PI.getSUnit()->getInstr(); |
1231 | if (PMI->isPHI() && PI.getKind() == SDep::Order) { |
1232 | if (I.getInstr()->isPHI()) { |
1233 | if (PMI->getOperand(0).getReg() == HasPhiUse) |
1234 | continue; |
1235 | if (getLoopPhiReg(*PMI, PMI->getParent()) == HasPhiDef) |
1236 | continue; |
1237 | } |
1238 | RemoveDeps.push_back(PI); |
1239 | } |
1240 | } |
1241 | for (int i = 0, e = RemoveDeps.size(); i != e; ++i) |
1242 | I.removePred(RemoveDeps[i]); |
1243 | } |
1244 | } |
1245 | |
1246 | /// Iterate over each DAG node and see if we can change any dependences |
1247 | /// in order to reduce the recurrence MII. |
1248 | void SwingSchedulerDAG::changeDependences() { |
1249 | // See if an instruction can use a value from the previous iteration. |
1250 | // If so, we update the base and offset of the instruction and change |
1251 | // the dependences. |
1252 | for (SUnit &I : SUnits) { |
1253 | unsigned BasePos = 0, OffsetPos = 0, NewBase = 0; |
1254 | int64_t NewOffset = 0; |
1255 | if (!canUseLastOffsetValue(I.getInstr(), BasePos, OffsetPos, NewBase, |
1256 | NewOffset)) |
1257 | continue; |
1258 | |
1259 | // Get the MI and SUnit for the instruction that defines the original base. |
1260 | unsigned OrigBase = I.getInstr()->getOperand(BasePos).getReg(); |
1261 | MachineInstr *DefMI = MRI.getUniqueVRegDef(OrigBase); |
1262 | if (!DefMI) |
1263 | continue; |
1264 | SUnit *DefSU = getSUnit(DefMI); |
1265 | if (!DefSU) |
1266 | continue; |
1267 | // Get the MI and SUnit for the instruction that defins the new base. |
1268 | MachineInstr *LastMI = MRI.getUniqueVRegDef(NewBase); |
1269 | if (!LastMI) |
1270 | continue; |
1271 | SUnit *LastSU = getSUnit(LastMI); |
1272 | if (!LastSU) |
1273 | continue; |
1274 | |
1275 | if (Topo.IsReachable(&I, LastSU)) |
1276 | continue; |
1277 | |
1278 | // Remove the dependence. The value now depends on a prior iteration. |
1279 | SmallVector<SDep, 4> Deps; |
1280 | for (SUnit::pred_iterator P = I.Preds.begin(), E = I.Preds.end(); P != E; |
1281 | ++P) |
1282 | if (P->getSUnit() == DefSU) |
1283 | Deps.push_back(*P); |
1284 | for (int i = 0, e = Deps.size(); i != e; i++) { |
1285 | Topo.RemovePred(&I, Deps[i].getSUnit()); |
1286 | I.removePred(Deps[i]); |
1287 | } |
1288 | // Remove the chain dependence between the instructions. |
1289 | Deps.clear(); |
1290 | for (auto &P : LastSU->Preds) |
1291 | if (P.getSUnit() == &I && P.getKind() == SDep::Order) |
1292 | Deps.push_back(P); |
1293 | for (int i = 0, e = Deps.size(); i != e; i++) { |
1294 | Topo.RemovePred(LastSU, Deps[i].getSUnit()); |
1295 | LastSU->removePred(Deps[i]); |
1296 | } |
1297 | |
1298 | // Add a dependence between the new instruction and the instruction |
1299 | // that defines the new base. |
1300 | SDep Dep(&I, SDep::Anti, NewBase); |
1301 | LastSU->addPred(Dep); |
1302 | |
1303 | // Remember the base and offset information so that we can update the |
1304 | // instruction during code generation. |
1305 | InstrChanges[&I] = std::make_pair(NewBase, NewOffset); |
1306 | } |
1307 | } |
1308 | |
1309 | namespace { |
1310 | |
1311 | // FuncUnitSorter - Comparison operator used to sort instructions by |
1312 | // the number of functional unit choices. |
1313 | struct FuncUnitSorter { |
1314 | const InstrItineraryData *InstrItins; |
1315 | DenseMap<unsigned, unsigned> Resources; |
1316 | |
1317 | FuncUnitSorter(const InstrItineraryData *IID) : InstrItins(IID) {} |
1318 | |
1319 | // Compute the number of functional unit alternatives needed |
1320 | // at each stage, and take the minimum value. We prioritize the |
1321 | // instructions by the least number of choices first. |
1322 | unsigned minFuncUnits(const MachineInstr *Inst, unsigned &F) const { |
1323 | unsigned schedClass = Inst->getDesc().getSchedClass(); |
1324 | unsigned min = UINT_MAX(2147483647 *2U +1U); |
1325 | for (const InstrStage *IS = InstrItins->beginStage(schedClass), |
1326 | *IE = InstrItins->endStage(schedClass); |
1327 | IS != IE; ++IS) { |
1328 | unsigned funcUnits = IS->getUnits(); |
1329 | unsigned numAlternatives = countPopulation(funcUnits); |
1330 | if (numAlternatives < min) { |
1331 | min = numAlternatives; |
1332 | F = funcUnits; |
1333 | } |
1334 | } |
1335 | return min; |
1336 | } |
1337 | |
1338 | // Compute the critical resources needed by the instruction. This |
1339 | // function records the functional units needed by instructions that |
1340 | // must use only one functional unit. We use this as a tie breaker |
1341 | // for computing the resource MII. The instrutions that require |
1342 | // the same, highly used, functional unit have high priority. |
1343 | void calcCriticalResources(MachineInstr &MI) { |
1344 | unsigned SchedClass = MI.getDesc().getSchedClass(); |
1345 | for (const InstrStage *IS = InstrItins->beginStage(SchedClass), |
1346 | *IE = InstrItins->endStage(SchedClass); |
1347 | IS != IE; ++IS) { |
1348 | unsigned FuncUnits = IS->getUnits(); |
1349 | if (countPopulation(FuncUnits) == 1) |
1350 | Resources[FuncUnits]++; |
1351 | } |
1352 | } |
1353 | |
1354 | /// Return true if IS1 has less priority than IS2. |
1355 | bool operator()(const MachineInstr *IS1, const MachineInstr *IS2) const { |
1356 | unsigned F1 = 0, F2 = 0; |
1357 | unsigned MFUs1 = minFuncUnits(IS1, F1); |
1358 | unsigned MFUs2 = minFuncUnits(IS2, F2); |
1359 | if (MFUs1 == 1 && MFUs2 == 1) |
1360 | return Resources.lookup(F1) < Resources.lookup(F2); |
1361 | return MFUs1 > MFUs2; |
1362 | } |
1363 | }; |
1364 | |
1365 | } // end anonymous namespace |
1366 | |
1367 | /// Calculate the resource constrained minimum initiation interval for the |
1368 | /// specified loop. We use the DFA to model the resources needed for |
1369 | /// each instruction, and we ignore dependences. A different DFA is created |
1370 | /// for each cycle that is required. When adding a new instruction, we attempt |
1371 | /// to add it to each existing DFA, until a legal space is found. If the |
1372 | /// instruction cannot be reserved in an existing DFA, we create a new one. |
1373 | unsigned SwingSchedulerDAG::calculateResMII() { |
1374 | SmallVector<DFAPacketizer *, 8> Resources; |
1375 | MachineBasicBlock *MBB = Loop.getHeader(); |
1376 | Resources.push_back(TII->CreateTargetScheduleState(MF.getSubtarget())); |
1377 | |
1378 | // Sort the instructions by the number of available choices for scheduling, |
1379 | // least to most. Use the number of critical resources as the tie breaker. |
1380 | FuncUnitSorter FUS = |
1381 | FuncUnitSorter(MF.getSubtarget().getInstrItineraryData()); |
1382 | for (MachineBasicBlock::iterator I = MBB->getFirstNonPHI(), |
1383 | E = MBB->getFirstTerminator(); |
1384 | I != E; ++I) |
1385 | FUS.calcCriticalResources(*I); |
1386 | PriorityQueue<MachineInstr *, std::vector<MachineInstr *>, FuncUnitSorter> |
1387 | FuncUnitOrder(FUS); |
1388 | |
1389 | for (MachineBasicBlock::iterator I = MBB->getFirstNonPHI(), |
1390 | E = MBB->getFirstTerminator(); |
1391 | I != E; ++I) |
1392 | FuncUnitOrder.push(&*I); |
1393 | |
1394 | while (!FuncUnitOrder.empty()) { |
1395 | MachineInstr *MI = FuncUnitOrder.top(); |
1396 | FuncUnitOrder.pop(); |
1397 | if (TII->isZeroCost(MI->getOpcode())) |
1398 | continue; |
1399 | // Attempt to reserve the instruction in an existing DFA. At least one |
1400 | // DFA is needed for each cycle. |
1401 | unsigned NumCycles = getSUnit(MI)->Latency; |
1402 | unsigned ReservedCycles = 0; |
1403 | SmallVectorImpl<DFAPacketizer *>::iterator RI = Resources.begin(); |
1404 | SmallVectorImpl<DFAPacketizer *>::iterator RE = Resources.end(); |
1405 | for (unsigned C = 0; C < NumCycles; ++C) |
1406 | while (RI != RE) { |
1407 | if ((*RI++)->canReserveResources(*MI)) { |
1408 | ++ReservedCycles; |
1409 | break; |
1410 | } |
1411 | } |
1412 | // Start reserving resources using existing DFAs. |
1413 | for (unsigned C = 0; C < ReservedCycles; ++C) { |
1414 | --RI; |
1415 | (*RI)->reserveResources(*MI); |
1416 | } |
1417 | // Add new DFAs, if needed, to reserve resources. |
1418 | for (unsigned C = ReservedCycles; C < NumCycles; ++C) { |
1419 | DFAPacketizer *NewResource = |
1420 | TII->CreateTargetScheduleState(MF.getSubtarget()); |
1421 | assert(NewResource->canReserveResources(*MI) && "Reserve error.")(static_cast <bool> (NewResource->canReserveResources (*MI) && "Reserve error.") ? void (0) : __assert_fail ("NewResource->canReserveResources(*MI) && \"Reserve error.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 1421, __extension__ __PRETTY_FUNCTION__)); |
1422 | NewResource->reserveResources(*MI); |
1423 | Resources.push_back(NewResource); |
1424 | } |
1425 | } |
1426 | int Resmii = Resources.size(); |
1427 | // Delete the memory for each of the DFAs that were created earlier. |
1428 | for (DFAPacketizer *RI : Resources) { |
1429 | DFAPacketizer *D = RI; |
1430 | delete D; |
1431 | } |
1432 | Resources.clear(); |
1433 | return Resmii; |
1434 | } |
1435 | |
1436 | /// Calculate the recurrence-constrainted minimum initiation interval. |
1437 | /// Iterate over each circuit. Compute the delay(c) and distance(c) |
1438 | /// for each circuit. The II needs to satisfy the inequality |
1439 | /// delay(c) - II*distance(c) <= 0. For each circuit, choose the smallest |
1440 | /// II that satisfies the inequality, and the RecMII is the maximum |
1441 | /// of those values. |
1442 | unsigned SwingSchedulerDAG::calculateRecMII(NodeSetType &NodeSets) { |
1443 | unsigned RecMII = 0; |
1444 | |
1445 | for (NodeSet &Nodes : NodeSets) { |
1446 | if (Nodes.empty()) |
1447 | continue; |
1448 | |
1449 | unsigned Delay = Nodes.getLatency(); |
1450 | unsigned Distance = 1; |
1451 | |
1452 | // ii = ceil(delay / distance) |
1453 | unsigned CurMII = (Delay + Distance - 1) / Distance; |
1454 | Nodes.setRecMII(CurMII); |
1455 | if (CurMII > RecMII) |
1456 | RecMII = CurMII; |
1457 | } |
1458 | |
1459 | return RecMII; |
1460 | } |
1461 | |
1462 | /// Swap all the anti dependences in the DAG. That means it is no longer a DAG, |
1463 | /// but we do this to find the circuits, and then change them back. |
1464 | static void swapAntiDependences(std::vector<SUnit> &SUnits) { |
1465 | SmallVector<std::pair<SUnit *, SDep>, 8> DepsAdded; |
1466 | for (unsigned i = 0, e = SUnits.size(); i != e; ++i) { |
1467 | SUnit *SU = &SUnits[i]; |
1468 | for (SUnit::pred_iterator IP = SU->Preds.begin(), EP = SU->Preds.end(); |
1469 | IP != EP; ++IP) { |
1470 | if (IP->getKind() != SDep::Anti) |
1471 | continue; |
1472 | DepsAdded.push_back(std::make_pair(SU, *IP)); |
1473 | } |
1474 | } |
1475 | for (SmallVector<std::pair<SUnit *, SDep>, 8>::iterator I = DepsAdded.begin(), |
1476 | E = DepsAdded.end(); |
1477 | I != E; ++I) { |
1478 | // Remove this anti dependency and add one in the reverse direction. |
1479 | SUnit *SU = I->first; |
1480 | SDep &D = I->second; |
1481 | SUnit *TargetSU = D.getSUnit(); |
1482 | unsigned Reg = D.getReg(); |
1483 | unsigned Lat = D.getLatency(); |
1484 | SU->removePred(D); |
1485 | SDep Dep(SU, SDep::Anti, Reg); |
1486 | Dep.setLatency(Lat); |
1487 | TargetSU->addPred(Dep); |
1488 | } |
1489 | } |
1490 | |
1491 | /// Create the adjacency structure of the nodes in the graph. |
1492 | void SwingSchedulerDAG::Circuits::createAdjacencyStructure( |
1493 | SwingSchedulerDAG *DAG) { |
1494 | BitVector Added(SUnits.size()); |
1495 | DenseMap<int, int> OutputDeps; |
1496 | for (int i = 0, e = SUnits.size(); i != e; ++i) { |
1497 | Added.reset(); |
1498 | // Add any successor to the adjacency matrix and exclude duplicates. |
1499 | for (auto &SI : SUnits[i].Succs) { |
1500 | // Only create a back-edge on the first and last nodes of a dependence |
1501 | // chain. This records any chains and adds them later. |
1502 | if (SI.getKind() == SDep::Output) { |
1503 | int N = SI.getSUnit()->NodeNum; |
1504 | int BackEdge = i; |
1505 | auto Dep = OutputDeps.find(BackEdge); |
1506 | if (Dep != OutputDeps.end()) { |
1507 | BackEdge = Dep->second; |
1508 | OutputDeps.erase(Dep); |
1509 | } |
1510 | OutputDeps[N] = BackEdge; |
1511 | } |
1512 | // Do not process a boundary node and a back-edge is processed only |
1513 | // if it goes to a Phi. |
1514 | if (SI.getSUnit()->isBoundaryNode() || |
1515 | (SI.getKind() == SDep::Anti && !SI.getSUnit()->getInstr()->isPHI())) |
1516 | continue; |
1517 | int N = SI.getSUnit()->NodeNum; |
1518 | if (!Added.test(N)) { |
1519 | AdjK[i].push_back(N); |
1520 | Added.set(N); |
1521 | } |
1522 | } |
1523 | // A chain edge between a store and a load is treated as a back-edge in the |
1524 | // adjacency matrix. |
1525 | for (auto &PI : SUnits[i].Preds) { |
1526 | if (!SUnits[i].getInstr()->mayStore() || |
1527 | !DAG->isLoopCarriedDep(&SUnits[i], PI, false)) |
1528 | continue; |
1529 | if (PI.getKind() == SDep::Order && PI.getSUnit()->getInstr()->mayLoad()) { |
1530 | int N = PI.getSUnit()->NodeNum; |
1531 | if (!Added.test(N)) { |
1532 | AdjK[i].push_back(N); |
1533 | Added.set(N); |
1534 | } |
1535 | } |
1536 | } |
1537 | } |
1538 | // Add back-eges in the adjacency matrix for the output dependences. |
1539 | for (auto &OD : OutputDeps) |
1540 | if (!Added.test(OD.second)) { |
1541 | AdjK[OD.first].push_back(OD.second); |
1542 | Added.set(OD.second); |
1543 | } |
1544 | } |
1545 | |
1546 | /// Identify an elementary circuit in the dependence graph starting at the |
1547 | /// specified node. |
1548 | bool SwingSchedulerDAG::Circuits::circuit(int V, int S, NodeSetType &NodeSets, |
1549 | bool HasBackedge) { |
1550 | SUnit *SV = &SUnits[V]; |
1551 | bool F = false; |
1552 | Stack.insert(SV); |
1553 | Blocked.set(V); |
1554 | |
1555 | for (auto W : AdjK[V]) { |
1556 | if (NumPaths > MaxPaths) |
1557 | break; |
1558 | if (W < S) |
1559 | continue; |
1560 | if (W == S) { |
1561 | if (!HasBackedge) |
1562 | NodeSets.push_back(NodeSet(Stack.begin(), Stack.end())); |
1563 | F = true; |
1564 | ++NumPaths; |
1565 | break; |
1566 | } else if (!Blocked.test(W)) { |
1567 | if (circuit(W, S, NodeSets, W < V ? true : HasBackedge)) |
1568 | F = true; |
1569 | } |
1570 | } |
1571 | |
1572 | if (F) |
1573 | unblock(V); |
1574 | else { |
1575 | for (auto W : AdjK[V]) { |
1576 | if (W < S) |
1577 | continue; |
1578 | if (B[W].count(SV) == 0) |
1579 | B[W].insert(SV); |
1580 | } |
1581 | } |
1582 | Stack.pop_back(); |
1583 | return F; |
1584 | } |
1585 | |
1586 | /// Unblock a node in the circuit finding algorithm. |
1587 | void SwingSchedulerDAG::Circuits::unblock(int U) { |
1588 | Blocked.reset(U); |
1589 | SmallPtrSet<SUnit *, 4> &BU = B[U]; |
1590 | while (!BU.empty()) { |
1591 | SmallPtrSet<SUnit *, 4>::iterator SI = BU.begin(); |
1592 | assert(SI != BU.end() && "Invalid B set.")(static_cast <bool> (SI != BU.end() && "Invalid B set." ) ? void (0) : __assert_fail ("SI != BU.end() && \"Invalid B set.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 1592, __extension__ __PRETTY_FUNCTION__)); |
1593 | SUnit *W = *SI; |
1594 | BU.erase(W); |
1595 | if (Blocked.test(W->NodeNum)) |
1596 | unblock(W->NodeNum); |
1597 | } |
1598 | } |
1599 | |
1600 | /// Identify all the elementary circuits in the dependence graph using |
1601 | /// Johnson's circuit algorithm. |
1602 | void SwingSchedulerDAG::findCircuits(NodeSetType &NodeSets) { |
1603 | // Swap all the anti dependences in the DAG. That means it is no longer a DAG, |
1604 | // but we do this to find the circuits, and then change them back. |
1605 | swapAntiDependences(SUnits); |
1606 | |
1607 | Circuits Cir(SUnits); |
1608 | // Create the adjacency structure. |
1609 | Cir.createAdjacencyStructure(this); |
1610 | for (int i = 0, e = SUnits.size(); i != e; ++i) { |
1611 | Cir.reset(); |
1612 | Cir.circuit(i, i, NodeSets); |
1613 | } |
1614 | |
1615 | // Change the dependences back so that we've created a DAG again. |
1616 | swapAntiDependences(SUnits); |
1617 | } |
1618 | |
1619 | /// Return true for DAG nodes that we ignore when computing the cost functions. |
1620 | /// We ignore the back-edge recurrence in order to avoid unbounded recursion |
1621 | /// in the calculation of the ASAP, ALAP, etc functions. |
1622 | static bool ignoreDependence(const SDep &D, bool isPred) { |
1623 | if (D.isArtificial()) |
1624 | return true; |
1625 | return D.getKind() == SDep::Anti && isPred; |
1626 | } |
1627 | |
1628 | /// Compute several functions need to order the nodes for scheduling. |
1629 | /// ASAP - Earliest time to schedule a node. |
1630 | /// ALAP - Latest time to schedule a node. |
1631 | /// MOV - Mobility function, difference between ALAP and ASAP. |
1632 | /// D - Depth of each node. |
1633 | /// H - Height of each node. |
1634 | void SwingSchedulerDAG::computeNodeFunctions(NodeSetType &NodeSets) { |
1635 | ScheduleInfo.resize(SUnits.size()); |
1636 | |
1637 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1638 | for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(),do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1639 | E = Topo.end();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1640 | I != E; ++I) {do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1641 | SUnit *SU = &SUnits[*I];do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1642 | SU->dump(this);do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1643 | }do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false) |
1644 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), E = Topo.end(); I != E; ++I) { SUnit *SU = &SUnits[*I]; SU->dump(this); } }; } } while (false); |
1645 | |
1646 | int maxASAP = 0; |
1647 | // Compute ASAP and ZeroLatencyDepth. |
1648 | for (ScheduleDAGTopologicalSort::const_iterator I = Topo.begin(), |
1649 | E = Topo.end(); |
1650 | I != E; ++I) { |
1651 | int asap = 0; |
1652 | int zeroLatencyDepth = 0; |
1653 | SUnit *SU = &SUnits[*I]; |
1654 | for (SUnit::const_pred_iterator IP = SU->Preds.begin(), |
1655 | EP = SU->Preds.end(); |
1656 | IP != EP; ++IP) { |
1657 | SUnit *pred = IP->getSUnit(); |
1658 | if (IP->getLatency() == 0) |
1659 | zeroLatencyDepth = |
1660 | std::max(zeroLatencyDepth, getZeroLatencyDepth(pred) + 1); |
1661 | if (ignoreDependence(*IP, true)) |
1662 | continue; |
1663 | asap = std::max(asap, (int)(getASAP(pred) + IP->getLatency() - |
1664 | getDistance(pred, SU, *IP) * MII)); |
1665 | } |
1666 | maxASAP = std::max(maxASAP, asap); |
1667 | ScheduleInfo[*I].ASAP = asap; |
1668 | ScheduleInfo[*I].ZeroLatencyDepth = zeroLatencyDepth; |
1669 | } |
1670 | |
1671 | // Compute ALAP, ZeroLatencyHeight, and MOV. |
1672 | for (ScheduleDAGTopologicalSort::const_reverse_iterator I = Topo.rbegin(), |
1673 | E = Topo.rend(); |
1674 | I != E; ++I) { |
1675 | int alap = maxASAP; |
1676 | int zeroLatencyHeight = 0; |
1677 | SUnit *SU = &SUnits[*I]; |
1678 | for (SUnit::const_succ_iterator IS = SU->Succs.begin(), |
1679 | ES = SU->Succs.end(); |
1680 | IS != ES; ++IS) { |
1681 | SUnit *succ = IS->getSUnit(); |
1682 | if (IS->getLatency() == 0) |
1683 | zeroLatencyHeight = |
1684 | std::max(zeroLatencyHeight, getZeroLatencyHeight(succ) + 1); |
1685 | if (ignoreDependence(*IS, true)) |
1686 | continue; |
1687 | alap = std::min(alap, (int)(getALAP(succ) - IS->getLatency() + |
1688 | getDistance(SU, succ, *IS) * MII)); |
1689 | } |
1690 | |
1691 | ScheduleInfo[*I].ALAP = alap; |
1692 | ScheduleInfo[*I].ZeroLatencyHeight = zeroLatencyHeight; |
1693 | } |
1694 | |
1695 | // After computing the node functions, compute the summary for each node set. |
1696 | for (NodeSet &I : NodeSets) |
1697 | I.computeNodeSetInfo(this); |
1698 | |
1699 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1700 | for (unsigned i = 0; i < SUnits.size(); i++) {do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1701 | dbgs() << "\tNode " << i << ":\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1702 | dbgs() << "\t ASAP = " << getASAP(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1703 | dbgs() << "\t ALAP = " << getALAP(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1704 | dbgs() << "\t MOV = " << getMOV(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1705 | dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1706 | dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1707 | dbgs() << "\t ZLD = " << getZeroLatencyDepth(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1708 | dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1709 | }do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false) |
1710 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { for (unsigned i = 0; i < SUnits.size(); i++) { dbgs() << "\tNode " << i << ":\n"; dbgs () << "\t ASAP = " << getASAP(&SUnits[i]) << "\n"; dbgs() << "\t ALAP = " << getALAP(&SUnits [i]) << "\n"; dbgs() << "\t MOV = " << getMOV (&SUnits[i]) << "\n"; dbgs() << "\t D = " << getDepth(&SUnits[i]) << "\n"; dbgs() << "\t H = " << getHeight(&SUnits[i]) << "\n" ; dbgs() << "\t ZLD = " << getZeroLatencyDepth (&SUnits[i]) << "\n"; dbgs() << "\t ZLH = " << getZeroLatencyHeight(&SUnits[i]) << "\n"; } }; } } while (false); |
1711 | } |
1712 | |
1713 | /// Compute the Pred_L(O) set, as defined in the paper. The set is defined |
1714 | /// as the predecessors of the elements of NodeOrder that are not also in |
1715 | /// NodeOrder. |
1716 | static bool pred_L(SetVector<SUnit *> &NodeOrder, |
1717 | SmallSetVector<SUnit *, 8> &Preds, |
1718 | const NodeSet *S = nullptr) { |
1719 | Preds.clear(); |
1720 | for (SetVector<SUnit *>::iterator I = NodeOrder.begin(), E = NodeOrder.end(); |
1721 | I != E; ++I) { |
1722 | for (SUnit::pred_iterator PI = (*I)->Preds.begin(), PE = (*I)->Preds.end(); |
1723 | PI != PE; ++PI) { |
1724 | if (S && S->count(PI->getSUnit()) == 0) |
1725 | continue; |
1726 | if (ignoreDependence(*PI, true)) |
1727 | continue; |
1728 | if (NodeOrder.count(PI->getSUnit()) == 0) |
1729 | Preds.insert(PI->getSUnit()); |
1730 | } |
1731 | // Back-edges are predecessors with an anti-dependence. |
1732 | for (SUnit::const_succ_iterator IS = (*I)->Succs.begin(), |
1733 | ES = (*I)->Succs.end(); |
1734 | IS != ES; ++IS) { |
1735 | if (IS->getKind() != SDep::Anti) |
1736 | continue; |
1737 | if (S && S->count(IS->getSUnit()) == 0) |
1738 | continue; |
1739 | if (NodeOrder.count(IS->getSUnit()) == 0) |
1740 | Preds.insert(IS->getSUnit()); |
1741 | } |
1742 | } |
1743 | return !Preds.empty(); |
1744 | } |
1745 | |
1746 | /// Compute the Succ_L(O) set, as defined in the paper. The set is defined |
1747 | /// as the successors of the elements of NodeOrder that are not also in |
1748 | /// NodeOrder. |
1749 | static bool succ_L(SetVector<SUnit *> &NodeOrder, |
1750 | SmallSetVector<SUnit *, 8> &Succs, |
1751 | const NodeSet *S = nullptr) { |
1752 | Succs.clear(); |
1753 | for (SetVector<SUnit *>::iterator I = NodeOrder.begin(), E = NodeOrder.end(); |
1754 | I != E; ++I) { |
1755 | for (SUnit::succ_iterator SI = (*I)->Succs.begin(), SE = (*I)->Succs.end(); |
1756 | SI != SE; ++SI) { |
1757 | if (S && S->count(SI->getSUnit()) == 0) |
1758 | continue; |
1759 | if (ignoreDependence(*SI, false)) |
1760 | continue; |
1761 | if (NodeOrder.count(SI->getSUnit()) == 0) |
1762 | Succs.insert(SI->getSUnit()); |
1763 | } |
1764 | for (SUnit::const_pred_iterator PI = (*I)->Preds.begin(), |
1765 | PE = (*I)->Preds.end(); |
1766 | PI != PE; ++PI) { |
1767 | if (PI->getKind() != SDep::Anti) |
1768 | continue; |
1769 | if (S && S->count(PI->getSUnit()) == 0) |
1770 | continue; |
1771 | if (NodeOrder.count(PI->getSUnit()) == 0) |
1772 | Succs.insert(PI->getSUnit()); |
1773 | } |
1774 | } |
1775 | return !Succs.empty(); |
1776 | } |
1777 | |
1778 | /// Return true if there is a path from the specified node to any of the nodes |
1779 | /// in DestNodes. Keep track and return the nodes in any path. |
1780 | static bool computePath(SUnit *Cur, SetVector<SUnit *> &Path, |
1781 | SetVector<SUnit *> &DestNodes, |
1782 | SetVector<SUnit *> &Exclude, |
1783 | SmallPtrSet<SUnit *, 8> &Visited) { |
1784 | if (Cur->isBoundaryNode()) |
1785 | return false; |
1786 | if (Exclude.count(Cur) != 0) |
1787 | return false; |
1788 | if (DestNodes.count(Cur) != 0) |
1789 | return true; |
1790 | if (!Visited.insert(Cur).second) |
1791 | return Path.count(Cur) != 0; |
1792 | bool FoundPath = false; |
1793 | for (auto &SI : Cur->Succs) |
1794 | FoundPath |= computePath(SI.getSUnit(), Path, DestNodes, Exclude, Visited); |
1795 | for (auto &PI : Cur->Preds) |
1796 | if (PI.getKind() == SDep::Anti) |
1797 | FoundPath |= |
1798 | computePath(PI.getSUnit(), Path, DestNodes, Exclude, Visited); |
1799 | if (FoundPath) |
1800 | Path.insert(Cur); |
1801 | return FoundPath; |
1802 | } |
1803 | |
1804 | /// Return true if Set1 is a subset of Set2. |
1805 | template <class S1Ty, class S2Ty> static bool isSubset(S1Ty &Set1, S2Ty &Set2) { |
1806 | for (typename S1Ty::iterator I = Set1.begin(), E = Set1.end(); I != E; ++I) |
1807 | if (Set2.count(*I) == 0) |
1808 | return false; |
1809 | return true; |
1810 | } |
1811 | |
1812 | /// Compute the live-out registers for the instructions in a node-set. |
1813 | /// The live-out registers are those that are defined in the node-set, |
1814 | /// but not used. Except for use operands of Phis. |
1815 | static void computeLiveOuts(MachineFunction &MF, RegPressureTracker &RPTracker, |
1816 | NodeSet &NS) { |
1817 | const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); |
1818 | MachineRegisterInfo &MRI = MF.getRegInfo(); |
1819 | SmallVector<RegisterMaskPair, 8> LiveOutRegs; |
1820 | SmallSet<unsigned, 4> Uses; |
1821 | for (SUnit *SU : NS) { |
1822 | const MachineInstr *MI = SU->getInstr(); |
1823 | if (MI->isPHI()) |
1824 | continue; |
1825 | for (const MachineOperand &MO : MI->operands()) |
1826 | if (MO.isReg() && MO.isUse()) { |
1827 | unsigned Reg = MO.getReg(); |
1828 | if (TargetRegisterInfo::isVirtualRegister(Reg)) |
1829 | Uses.insert(Reg); |
1830 | else if (MRI.isAllocatable(Reg)) |
1831 | for (MCRegUnitIterator Units(Reg, TRI); Units.isValid(); ++Units) |
1832 | Uses.insert(*Units); |
1833 | } |
1834 | } |
1835 | for (SUnit *SU : NS) |
1836 | for (const MachineOperand &MO : SU->getInstr()->operands()) |
1837 | if (MO.isReg() && MO.isDef() && !MO.isDead()) { |
1838 | unsigned Reg = MO.getReg(); |
1839 | if (TargetRegisterInfo::isVirtualRegister(Reg)) { |
1840 | if (!Uses.count(Reg)) |
1841 | LiveOutRegs.push_back(RegisterMaskPair(Reg, |
1842 | LaneBitmask::getNone())); |
1843 | } else if (MRI.isAllocatable(Reg)) { |
1844 | for (MCRegUnitIterator Units(Reg, TRI); Units.isValid(); ++Units) |
1845 | if (!Uses.count(*Units)) |
1846 | LiveOutRegs.push_back(RegisterMaskPair(*Units, |
1847 | LaneBitmask::getNone())); |
1848 | } |
1849 | } |
1850 | RPTracker.addLiveRegs(LiveOutRegs); |
1851 | } |
1852 | |
1853 | /// A heuristic to filter nodes in recurrent node-sets if the register |
1854 | /// pressure of a set is too high. |
1855 | void SwingSchedulerDAG::registerPressureFilter(NodeSetType &NodeSets) { |
1856 | for (auto &NS : NodeSets) { |
1857 | // Skip small node-sets since they won't cause register pressure problems. |
1858 | if (NS.size() <= 2) |
1859 | continue; |
1860 | IntervalPressure RecRegPressure; |
1861 | RegPressureTracker RecRPTracker(RecRegPressure); |
1862 | RecRPTracker.init(&MF, &RegClassInfo, &LIS, BB, BB->end(), false, true); |
1863 | computeLiveOuts(MF, RecRPTracker, NS); |
1864 | RecRPTracker.closeBottom(); |
1865 | |
1866 | std::vector<SUnit *> SUnits(NS.begin(), NS.end()); |
1867 | llvm::sort(SUnits.begin(), SUnits.end(), |
1868 | [](const SUnit *A, const SUnit *B) { |
1869 | return A->NodeNum > B->NodeNum; |
1870 | }); |
1871 | |
1872 | for (auto &SU : SUnits) { |
1873 | // Since we're computing the register pressure for a subset of the |
1874 | // instructions in a block, we need to set the tracker for each |
1875 | // instruction in the node-set. The tracker is set to the instruction |
1876 | // just after the one we're interested in. |
1877 | MachineBasicBlock::const_iterator CurInstI = SU->getInstr(); |
1878 | RecRPTracker.setPos(std::next(CurInstI)); |
1879 | |
1880 | RegPressureDelta RPDelta; |
1881 | ArrayRef<PressureChange> CriticalPSets; |
1882 | RecRPTracker.getMaxUpwardPressureDelta(SU->getInstr(), nullptr, RPDelta, |
1883 | CriticalPSets, |
1884 | RecRegPressure.MaxSetPressure); |
1885 | if (RPDelta.Excess.isValid()) { |
1886 | LLVM_DEBUG(do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Excess register pressure: SU(" << SU->NodeNum << ") " << TRI->getRegPressureSetName (RPDelta.Excess.getPSet()) << ":" << RPDelta.Excess .getUnitInc(); } } while (false) |
1887 | dbgs() << "Excess register pressure: SU(" << SU->NodeNum << ") "do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Excess register pressure: SU(" << SU->NodeNum << ") " << TRI->getRegPressureSetName (RPDelta.Excess.getPSet()) << ":" << RPDelta.Excess .getUnitInc(); } } while (false) |
1888 | << TRI->getRegPressureSetName(RPDelta.Excess.getPSet())do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Excess register pressure: SU(" << SU->NodeNum << ") " << TRI->getRegPressureSetName (RPDelta.Excess.getPSet()) << ":" << RPDelta.Excess .getUnitInc(); } } while (false) |
1889 | << ":" << RPDelta.Excess.getUnitInc())do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Excess register pressure: SU(" << SU->NodeNum << ") " << TRI->getRegPressureSetName (RPDelta.Excess.getPSet()) << ":" << RPDelta.Excess .getUnitInc(); } } while (false); |
1890 | NS.setExceedPressure(SU); |
1891 | break; |
1892 | } |
1893 | RecRPTracker.recede(); |
1894 | } |
1895 | } |
1896 | } |
1897 | |
1898 | /// A heuristic to colocate node sets that have the same set of |
1899 | /// successors. |
1900 | void SwingSchedulerDAG::colocateNodeSets(NodeSetType &NodeSets) { |
1901 | unsigned Colocate = 0; |
1902 | for (int i = 0, e = NodeSets.size(); i < e; ++i) { |
1903 | NodeSet &N1 = NodeSets[i]; |
1904 | SmallSetVector<SUnit *, 8> S1; |
1905 | if (N1.empty() || !succ_L(N1, S1)) |
1906 | continue; |
1907 | for (int j = i + 1; j < e; ++j) { |
1908 | NodeSet &N2 = NodeSets[j]; |
1909 | if (N1.compareRecMII(N2) != 0) |
1910 | continue; |
1911 | SmallSetVector<SUnit *, 8> S2; |
1912 | if (N2.empty() || !succ_L(N2, S2)) |
1913 | continue; |
1914 | if (isSubset(S1, S2) && S1.size() == S2.size()) { |
1915 | N1.setColocate(++Colocate); |
1916 | N2.setColocate(Colocate); |
1917 | break; |
1918 | } |
1919 | } |
1920 | } |
1921 | } |
1922 | |
1923 | /// Check if the existing node-sets are profitable. If not, then ignore the |
1924 | /// recurrent node-sets, and attempt to schedule all nodes together. This is |
1925 | /// a heuristic. If the MII is large and all the recurrent node-sets are small, |
1926 | /// then it's best to try to schedule all instructions together instead of |
1927 | /// starting with the recurrent node-sets. |
1928 | void SwingSchedulerDAG::checkNodeSets(NodeSetType &NodeSets) { |
1929 | // Look for loops with a large MII. |
1930 | if (MII < 17) |
1931 | return; |
1932 | // Check if the node-set contains only a simple add recurrence. |
1933 | for (auto &NS : NodeSets) { |
1934 | if (NS.getRecMII() > 2) |
1935 | return; |
1936 | if (NS.getMaxDepth() > MII) |
1937 | return; |
1938 | } |
1939 | NodeSets.clear(); |
1940 | LLVM_DEBUG(dbgs() << "Clear recurrence node-sets\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Clear recurrence node-sets\n" ; } } while (false); |
1941 | return; |
1942 | } |
1943 | |
1944 | /// Add the nodes that do not belong to a recurrence set into groups |
1945 | /// based upon connected componenets. |
1946 | void SwingSchedulerDAG::groupRemainingNodes(NodeSetType &NodeSets) { |
1947 | SetVector<SUnit *> NodesAdded; |
1948 | SmallPtrSet<SUnit *, 8> Visited; |
1949 | // Add the nodes that are on a path between the previous node sets and |
1950 | // the current node set. |
1951 | for (NodeSet &I : NodeSets) { |
1952 | SmallSetVector<SUnit *, 8> N; |
1953 | // Add the nodes from the current node set to the previous node set. |
1954 | if (succ_L(I, N)) { |
1955 | SetVector<SUnit *> Path; |
1956 | for (SUnit *NI : N) { |
1957 | Visited.clear(); |
1958 | computePath(NI, Path, NodesAdded, I, Visited); |
1959 | } |
1960 | if (!Path.empty()) |
1961 | I.insert(Path.begin(), Path.end()); |
1962 | } |
1963 | // Add the nodes from the previous node set to the current node set. |
1964 | N.clear(); |
1965 | if (succ_L(NodesAdded, N)) { |
1966 | SetVector<SUnit *> Path; |
1967 | for (SUnit *NI : N) { |
1968 | Visited.clear(); |
1969 | computePath(NI, Path, I, NodesAdded, Visited); |
1970 | } |
1971 | if (!Path.empty()) |
1972 | I.insert(Path.begin(), Path.end()); |
1973 | } |
1974 | NodesAdded.insert(I.begin(), I.end()); |
1975 | } |
1976 | |
1977 | // Create a new node set with the connected nodes of any successor of a node |
1978 | // in a recurrent set. |
1979 | NodeSet NewSet; |
1980 | SmallSetVector<SUnit *, 8> N; |
1981 | if (succ_L(NodesAdded, N)) |
1982 | for (SUnit *I : N) |
1983 | addConnectedNodes(I, NewSet, NodesAdded); |
1984 | if (!NewSet.empty()) |
1985 | NodeSets.push_back(NewSet); |
1986 | |
1987 | // Create a new node set with the connected nodes of any predecessor of a node |
1988 | // in a recurrent set. |
1989 | NewSet.clear(); |
1990 | if (pred_L(NodesAdded, N)) |
1991 | for (SUnit *I : N) |
1992 | addConnectedNodes(I, NewSet, NodesAdded); |
1993 | if (!NewSet.empty()) |
1994 | NodeSets.push_back(NewSet); |
1995 | |
1996 | // Create new nodes sets with the connected nodes any remaining node that |
1997 | // has no predecessor. |
1998 | for (unsigned i = 0; i < SUnits.size(); ++i) { |
1999 | SUnit *SU = &SUnits[i]; |
2000 | if (NodesAdded.count(SU) == 0) { |
2001 | NewSet.clear(); |
2002 | addConnectedNodes(SU, NewSet, NodesAdded); |
2003 | if (!NewSet.empty()) |
2004 | NodeSets.push_back(NewSet); |
2005 | } |
2006 | } |
2007 | } |
2008 | |
2009 | /// Add the node to the set, and add all is its connected nodes to the set. |
2010 | void SwingSchedulerDAG::addConnectedNodes(SUnit *SU, NodeSet &NewSet, |
2011 | SetVector<SUnit *> &NodesAdded) { |
2012 | NewSet.insert(SU); |
2013 | NodesAdded.insert(SU); |
2014 | for (auto &SI : SU->Succs) { |
2015 | SUnit *Successor = SI.getSUnit(); |
2016 | if (!SI.isArtificial() && NodesAdded.count(Successor) == 0) |
2017 | addConnectedNodes(Successor, NewSet, NodesAdded); |
2018 | } |
2019 | for (auto &PI : SU->Preds) { |
2020 | SUnit *Predecessor = PI.getSUnit(); |
2021 | if (!PI.isArtificial() && NodesAdded.count(Predecessor) == 0) |
2022 | addConnectedNodes(Predecessor, NewSet, NodesAdded); |
2023 | } |
2024 | } |
2025 | |
2026 | /// Return true if Set1 contains elements in Set2. The elements in common |
2027 | /// are returned in a different container. |
2028 | static bool isIntersect(SmallSetVector<SUnit *, 8> &Set1, const NodeSet &Set2, |
2029 | SmallSetVector<SUnit *, 8> &Result) { |
2030 | Result.clear(); |
2031 | for (unsigned i = 0, e = Set1.size(); i != e; ++i) { |
2032 | SUnit *SU = Set1[i]; |
2033 | if (Set2.count(SU) != 0) |
2034 | Result.insert(SU); |
2035 | } |
2036 | return !Result.empty(); |
2037 | } |
2038 | |
2039 | /// Merge the recurrence node sets that have the same initial node. |
2040 | void SwingSchedulerDAG::fuseRecs(NodeSetType &NodeSets) { |
2041 | for (NodeSetType::iterator I = NodeSets.begin(), E = NodeSets.end(); I != E; |
2042 | ++I) { |
2043 | NodeSet &NI = *I; |
2044 | for (NodeSetType::iterator J = I + 1; J != E;) { |
2045 | NodeSet &NJ = *J; |
2046 | if (NI.getNode(0)->NodeNum == NJ.getNode(0)->NodeNum) { |
2047 | if (NJ.compareRecMII(NI) > 0) |
2048 | NI.setRecMII(NJ.getRecMII()); |
2049 | for (NodeSet::iterator NII = J->begin(), ENI = J->end(); NII != ENI; |
2050 | ++NII) |
2051 | I->insert(*NII); |
2052 | NodeSets.erase(J); |
2053 | E = NodeSets.end(); |
2054 | } else { |
2055 | ++J; |
2056 | } |
2057 | } |
2058 | } |
2059 | } |
2060 | |
2061 | /// Remove nodes that have been scheduled in previous NodeSets. |
2062 | void SwingSchedulerDAG::removeDuplicateNodes(NodeSetType &NodeSets) { |
2063 | for (NodeSetType::iterator I = NodeSets.begin(), E = NodeSets.end(); I != E; |
2064 | ++I) |
2065 | for (NodeSetType::iterator J = I + 1; J != E;) { |
2066 | J->remove_if([&](SUnit *SUJ) { return I->count(SUJ); }); |
2067 | |
2068 | if (J->empty()) { |
2069 | NodeSets.erase(J); |
2070 | E = NodeSets.end(); |
2071 | } else { |
2072 | ++J; |
2073 | } |
2074 | } |
2075 | } |
2076 | |
2077 | /// Compute an ordered list of the dependence graph nodes, which |
2078 | /// indicates the order that the nodes will be scheduled. This is a |
2079 | /// two-level algorithm. First, a partial order is created, which |
2080 | /// consists of a list of sets ordered from highest to lowest priority. |
2081 | void SwingSchedulerDAG::computeNodeOrder(NodeSetType &NodeSets) { |
2082 | SmallSetVector<SUnit *, 8> R; |
2083 | NodeOrder.clear(); |
2084 | |
2085 | for (auto &Nodes : NodeSets) { |
2086 | LLVM_DEBUG(dbgs() << "NodeSet size " << Nodes.size() << "\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "NodeSet size " << Nodes .size() << "\n"; } } while (false); |
2087 | OrderKind Order; |
2088 | SmallSetVector<SUnit *, 8> N; |
2089 | if (pred_L(NodeOrder, N) && isSubset(N, Nodes)) { |
2090 | R.insert(N.begin(), N.end()); |
2091 | Order = BottomUp; |
2092 | LLVM_DEBUG(dbgs() << " Bottom up (preds) ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << " Bottom up (preds) "; } } while (false); |
2093 | } else if (succ_L(NodeOrder, N) && isSubset(N, Nodes)) { |
2094 | R.insert(N.begin(), N.end()); |
2095 | Order = TopDown; |
2096 | LLVM_DEBUG(dbgs() << " Top down (succs) ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << " Top down (succs) "; } } while (false); |
2097 | } else if (isIntersect(N, Nodes, R)) { |
2098 | // If some of the successors are in the existing node-set, then use the |
2099 | // top-down ordering. |
2100 | Order = TopDown; |
2101 | LLVM_DEBUG(dbgs() << " Top down (intersect) ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << " Top down (intersect) "; } } while (false); |
2102 | } else if (NodeSets.size() == 1) { |
2103 | for (auto &N : Nodes) |
2104 | if (N->Succs.size() == 0) |
2105 | R.insert(N); |
2106 | Order = BottomUp; |
2107 | LLVM_DEBUG(dbgs() << " Bottom up (all) ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << " Bottom up (all) "; } } while (false); |
2108 | } else { |
2109 | // Find the node with the highest ASAP. |
2110 | SUnit *maxASAP = nullptr; |
2111 | for (SUnit *SU : Nodes) { |
2112 | if (maxASAP == nullptr || getASAP(SU) > getASAP(maxASAP) || |
2113 | (getASAP(SU) == getASAP(maxASAP) && SU->NodeNum > maxASAP->NodeNum)) |
2114 | maxASAP = SU; |
2115 | } |
2116 | R.insert(maxASAP); |
2117 | Order = BottomUp; |
2118 | LLVM_DEBUG(dbgs() << " Bottom up (default) ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << " Bottom up (default) "; } } while (false); |
2119 | } |
2120 | |
2121 | while (!R.empty()) { |
2122 | if (Order == TopDown) { |
2123 | // Choose the node with the maximum height. If more than one, choose |
2124 | // the node wiTH the maximum ZeroLatencyHeight. If still more than one, |
2125 | // choose the node with the lowest MOV. |
2126 | while (!R.empty()) { |
2127 | SUnit *maxHeight = nullptr; |
2128 | for (SUnit *I : R) { |
2129 | if (maxHeight == nullptr || getHeight(I) > getHeight(maxHeight)) |
2130 | maxHeight = I; |
2131 | else if (getHeight(I) == getHeight(maxHeight) && |
2132 | getZeroLatencyHeight(I) > getZeroLatencyHeight(maxHeight)) |
2133 | maxHeight = I; |
2134 | else if (getHeight(I) == getHeight(maxHeight) && |
2135 | getZeroLatencyHeight(I) == |
2136 | getZeroLatencyHeight(maxHeight) && |
2137 | getMOV(I) < getMOV(maxHeight)) |
2138 | maxHeight = I; |
2139 | } |
2140 | NodeOrder.insert(maxHeight); |
2141 | LLVM_DEBUG(dbgs() << maxHeight->NodeNum << " ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << maxHeight->NodeNum << " "; } } while (false); |
2142 | R.remove(maxHeight); |
2143 | for (const auto &I : maxHeight->Succs) { |
2144 | if (Nodes.count(I.getSUnit()) == 0) |
2145 | continue; |
2146 | if (NodeOrder.count(I.getSUnit()) != 0) |
2147 | continue; |
2148 | if (ignoreDependence(I, false)) |
2149 | continue; |
2150 | R.insert(I.getSUnit()); |
2151 | } |
2152 | // Back-edges are predecessors with an anti-dependence. |
2153 | for (const auto &I : maxHeight->Preds) { |
2154 | if (I.getKind() != SDep::Anti) |
2155 | continue; |
2156 | if (Nodes.count(I.getSUnit()) == 0) |
2157 | continue; |
2158 | if (NodeOrder.count(I.getSUnit()) != 0) |
2159 | continue; |
2160 | R.insert(I.getSUnit()); |
2161 | } |
2162 | } |
2163 | Order = BottomUp; |
2164 | LLVM_DEBUG(dbgs() << "\n Switching order to bottom up ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "\n Switching order to bottom up " ; } } while (false); |
2165 | SmallSetVector<SUnit *, 8> N; |
2166 | if (pred_L(NodeOrder, N, &Nodes)) |
2167 | R.insert(N.begin(), N.end()); |
2168 | } else { |
2169 | // Choose the node with the maximum depth. If more than one, choose |
2170 | // the node with the maximum ZeroLatencyDepth. If still more than one, |
2171 | // choose the node with the lowest MOV. |
2172 | while (!R.empty()) { |
2173 | SUnit *maxDepth = nullptr; |
2174 | for (SUnit *I : R) { |
2175 | if (maxDepth == nullptr || getDepth(I) > getDepth(maxDepth)) |
2176 | maxDepth = I; |
2177 | else if (getDepth(I) == getDepth(maxDepth) && |
2178 | getZeroLatencyDepth(I) > getZeroLatencyDepth(maxDepth)) |
2179 | maxDepth = I; |
2180 | else if (getDepth(I) == getDepth(maxDepth) && |
2181 | getZeroLatencyDepth(I) == getZeroLatencyDepth(maxDepth) && |
2182 | getMOV(I) < getMOV(maxDepth)) |
2183 | maxDepth = I; |
2184 | } |
2185 | NodeOrder.insert(maxDepth); |
2186 | LLVM_DEBUG(dbgs() << maxDepth->NodeNum << " ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << maxDepth->NodeNum << " "; } } while (false); |
2187 | R.remove(maxDepth); |
2188 | if (Nodes.isExceedSU(maxDepth)) { |
2189 | Order = TopDown; |
2190 | R.clear(); |
2191 | R.insert(Nodes.getNode(0)); |
2192 | break; |
2193 | } |
2194 | for (const auto &I : maxDepth->Preds) { |
2195 | if (Nodes.count(I.getSUnit()) == 0) |
2196 | continue; |
2197 | if (NodeOrder.count(I.getSUnit()) != 0) |
2198 | continue; |
2199 | R.insert(I.getSUnit()); |
2200 | } |
2201 | // Back-edges are predecessors with an anti-dependence. |
2202 | for (const auto &I : maxDepth->Succs) { |
2203 | if (I.getKind() != SDep::Anti) |
2204 | continue; |
2205 | if (Nodes.count(I.getSUnit()) == 0) |
2206 | continue; |
2207 | if (NodeOrder.count(I.getSUnit()) != 0) |
2208 | continue; |
2209 | R.insert(I.getSUnit()); |
2210 | } |
2211 | } |
2212 | Order = TopDown; |
2213 | LLVM_DEBUG(dbgs() << "\n Switching order to top down ")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "\n Switching order to top down " ; } } while (false); |
2214 | SmallSetVector<SUnit *, 8> N; |
2215 | if (succ_L(NodeOrder, N, &Nodes)) |
2216 | R.insert(N.begin(), N.end()); |
2217 | } |
2218 | } |
2219 | LLVM_DEBUG(dbgs() << "\nDone with Nodeset\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "\nDone with Nodeset\n"; } } while (false); |
2220 | } |
2221 | |
2222 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false) |
2223 | dbgs() << "Node order: ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false) |
2224 | for (SUnit *I : NodeOrder)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false) |
2225 | dbgs() << " " << I->NodeNum << " ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false) |
2226 | dbgs() << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false) |
2227 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Node order: "; for (SUnit *I : NodeOrder) dbgs() << " " << I->NodeNum << " "; dbgs() << "\n"; }; } } while (false); |
2228 | } |
2229 | |
2230 | /// Process the nodes in the computed order and create the pipelined schedule |
2231 | /// of the instructions, if possible. Return true if a schedule is found. |
2232 | bool SwingSchedulerDAG::schedulePipeline(SMSchedule &Schedule) { |
2233 | if (NodeOrder.empty()) |
2234 | return false; |
2235 | |
2236 | bool scheduleFound = false; |
2237 | // Keep increasing II until a valid schedule is found. |
2238 | for (unsigned II = MII; II < MII + 10 && !scheduleFound; ++II) { |
2239 | Schedule.reset(); |
2240 | Schedule.setInitiationInterval(II); |
2241 | LLVM_DEBUG(dbgs() << "Try to schedule with " << II << "\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Try to schedule with " << II << "\n"; } } while (false); |
2242 | |
2243 | SetVector<SUnit *>::iterator NI = NodeOrder.begin(); |
2244 | SetVector<SUnit *>::iterator NE = NodeOrder.end(); |
2245 | do { |
2246 | SUnit *SU = *NI; |
2247 | |
2248 | // Compute the schedule time for the instruction, which is based |
2249 | // upon the scheduled time for any predecessors/successors. |
2250 | int EarlyStart = INT_MIN(-2147483647 -1); |
2251 | int LateStart = INT_MAX2147483647; |
2252 | // These values are set when the size of the schedule window is limited |
2253 | // due to chain dependences. |
2254 | int SchedEnd = INT_MAX2147483647; |
2255 | int SchedStart = INT_MIN(-2147483647 -1); |
2256 | Schedule.computeStart(SU, &EarlyStart, &LateStart, &SchedEnd, &SchedStart, |
2257 | II, this); |
2258 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Inst (" << SU->NodeNum << ") "; SU->getInstr()->dump(); dbgs() << "\n"; }; } } while (false) |
2259 | dbgs() << "Inst (" << SU->NodeNum << ") ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Inst (" << SU->NodeNum << ") "; SU->getInstr()->dump(); dbgs() << "\n"; }; } } while (false) |
2260 | SU->getInstr()->dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Inst (" << SU->NodeNum << ") "; SU->getInstr()->dump(); dbgs() << "\n"; }; } } while (false) |
2261 | dbgs() << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Inst (" << SU->NodeNum << ") "; SU->getInstr()->dump(); dbgs() << "\n"; }; } } while (false) |
2262 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "Inst (" << SU->NodeNum << ") "; SU->getInstr()->dump(); dbgs() << "\n"; }; } } while (false); |
2263 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tes: " << EarlyStart << " ls: " << LateStart << " me: " << SchedEnd << " ms: " << SchedStart << "\n"; }; } } while (false) |
2264 | dbgs() << "\tes: " << EarlyStart << " ls: " << LateStartdo { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tes: " << EarlyStart << " ls: " << LateStart << " me: " << SchedEnd << " ms: " << SchedStart << "\n"; }; } } while (false) |
2265 | << " me: " << SchedEnd << " ms: " << SchedStart << "\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tes: " << EarlyStart << " ls: " << LateStart << " me: " << SchedEnd << " ms: " << SchedStart << "\n"; }; } } while (false) |
2266 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tes: " << EarlyStart << " ls: " << LateStart << " me: " << SchedEnd << " ms: " << SchedStart << "\n"; }; } } while (false); |
2267 | |
2268 | if (EarlyStart > LateStart || SchedEnd < EarlyStart || |
2269 | SchedStart > LateStart) |
2270 | scheduleFound = false; |
2271 | else if (EarlyStart != INT_MIN(-2147483647 -1) && LateStart == INT_MAX2147483647) { |
2272 | SchedEnd = std::min(SchedEnd, EarlyStart + (int)II - 1); |
2273 | scheduleFound = Schedule.insert(SU, EarlyStart, SchedEnd, II); |
2274 | } else if (EarlyStart == INT_MIN(-2147483647 -1) && LateStart != INT_MAX2147483647) { |
2275 | SchedStart = std::max(SchedStart, LateStart - (int)II + 1); |
2276 | scheduleFound = Schedule.insert(SU, LateStart, SchedStart, II); |
2277 | } else if (EarlyStart != INT_MIN(-2147483647 -1) && LateStart != INT_MAX2147483647) { |
2278 | SchedEnd = |
2279 | std::min(SchedEnd, std::min(LateStart, EarlyStart + (int)II - 1)); |
2280 | // When scheduling a Phi it is better to start at the late cycle and go |
2281 | // backwards. The default order may insert the Phi too far away from |
2282 | // its first dependence. |
2283 | if (SU->getInstr()->isPHI()) |
2284 | scheduleFound = Schedule.insert(SU, SchedEnd, EarlyStart, II); |
2285 | else |
2286 | scheduleFound = Schedule.insert(SU, EarlyStart, SchedEnd, II); |
2287 | } else { |
2288 | int FirstCycle = Schedule.getFirstCycle(); |
2289 | scheduleFound = Schedule.insert(SU, FirstCycle + getASAP(SU), |
2290 | FirstCycle + getASAP(SU) + II - 1, II); |
2291 | } |
2292 | // Even if we find a schedule, make sure the schedule doesn't exceed the |
2293 | // allowable number of stages. We keep trying if this happens. |
2294 | if (scheduleFound) |
2295 | if (SwpMaxStages > -1 && |
2296 | Schedule.getMaxStageCount() > (unsigned)SwpMaxStages) |
2297 | scheduleFound = false; |
2298 | |
2299 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!scheduleFound) dbgs() << "\tCan't schedule\n" ; }; } } while (false) |
2300 | if (!scheduleFound)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!scheduleFound) dbgs() << "\tCan't schedule\n" ; }; } } while (false) |
2301 | dbgs() << "\tCan't schedule\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!scheduleFound) dbgs() << "\tCan't schedule\n" ; }; } } while (false) |
2302 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!scheduleFound) dbgs() << "\tCan't schedule\n" ; }; } } while (false); |
2303 | } while (++NI != NE && scheduleFound); |
2304 | |
2305 | // If a schedule is found, check if it is a valid schedule too. |
2306 | if (scheduleFound) |
2307 | scheduleFound = Schedule.isValidSchedule(this); |
2308 | } |
2309 | |
2310 | LLVM_DEBUG(dbgs() << "Schedule Found? " << scheduleFound << "\n")do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Schedule Found? " << scheduleFound << "\n"; } } while (false); |
2311 | |
2312 | if (scheduleFound) |
2313 | Schedule.finalizeSchedule(this); |
2314 | else |
2315 | Schedule.reset(); |
2316 | |
2317 | return scheduleFound && Schedule.getMaxStageCount() > 0; |
2318 | } |
2319 | |
2320 | /// Given a schedule for the loop, generate a new version of the loop, |
2321 | /// and replace the old version. This function generates a prolog |
2322 | /// that contains the initial iterations in the pipeline, and kernel |
2323 | /// loop, and the epilogue that contains the code for the final |
2324 | /// iterations. |
2325 | void SwingSchedulerDAG::generatePipelinedLoop(SMSchedule &Schedule) { |
2326 | // Create a new basic block for the kernel and add it to the CFG. |
2327 | MachineBasicBlock *KernelBB = MF.CreateMachineBasicBlock(BB->getBasicBlock()); |
2328 | |
2329 | unsigned MaxStageCount = Schedule.getMaxStageCount(); |
2330 | |
2331 | // Remember the registers that are used in different stages. The index is |
2332 | // the iteration, or stage, that the instruction is scheduled in. This is |
2333 | // a map between register names in the original block and the names created |
2334 | // in each stage of the pipelined loop. |
2335 | ValueMapTy *VRMap = new ValueMapTy[(MaxStageCount + 1) * 2]; |
2336 | InstrMapTy InstrMap; |
2337 | |
2338 | SmallVector<MachineBasicBlock *, 4> PrologBBs; |
2339 | // Generate the prolog instructions that set up the pipeline. |
2340 | generateProlog(Schedule, MaxStageCount, KernelBB, VRMap, PrologBBs); |
2341 | MF.insert(BB->getIterator(), KernelBB); |
2342 | |
2343 | // Rearrange the instructions to generate the new, pipelined loop, |
2344 | // and update register names as needed. |
2345 | for (int Cycle = Schedule.getFirstCycle(), |
2346 | LastCycle = Schedule.getFinalCycle(); |
2347 | Cycle <= LastCycle; ++Cycle) { |
2348 | std::deque<SUnit *> &CycleInstrs = Schedule.getInstructions(Cycle); |
2349 | // This inner loop schedules each instruction in the cycle. |
2350 | for (SUnit *CI : CycleInstrs) { |
2351 | if (CI->getInstr()->isPHI()) |
2352 | continue; |
2353 | unsigned StageNum = Schedule.stageScheduled(getSUnit(CI->getInstr())); |
2354 | MachineInstr *NewMI = cloneInstr(CI->getInstr(), MaxStageCount, StageNum); |
2355 | updateInstruction(NewMI, false, MaxStageCount, StageNum, Schedule, VRMap); |
2356 | KernelBB->push_back(NewMI); |
2357 | InstrMap[NewMI] = CI->getInstr(); |
2358 | } |
2359 | } |
2360 | |
2361 | // Copy any terminator instructions to the new kernel, and update |
2362 | // names as needed. |
2363 | for (MachineBasicBlock::iterator I = BB->getFirstTerminator(), |
2364 | E = BB->instr_end(); |
2365 | I != E; ++I) { |
2366 | MachineInstr *NewMI = MF.CloneMachineInstr(&*I); |
2367 | updateInstruction(NewMI, false, MaxStageCount, 0, Schedule, VRMap); |
2368 | KernelBB->push_back(NewMI); |
2369 | InstrMap[NewMI] = &*I; |
2370 | } |
2371 | |
2372 | KernelBB->transferSuccessors(BB); |
2373 | KernelBB->replaceSuccessor(BB, KernelBB); |
2374 | |
2375 | generateExistingPhis(KernelBB, PrologBBs.back(), KernelBB, KernelBB, Schedule, |
2376 | VRMap, InstrMap, MaxStageCount, MaxStageCount, false); |
2377 | generatePhis(KernelBB, PrologBBs.back(), KernelBB, KernelBB, Schedule, VRMap, |
2378 | InstrMap, MaxStageCount, MaxStageCount, false); |
2379 | |
2380 | LLVM_DEBUG(dbgs() << "New block\n"; KernelBB->dump();)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "New block\n"; KernelBB-> dump();; } } while (false); |
2381 | |
2382 | SmallVector<MachineBasicBlock *, 4> EpilogBBs; |
2383 | // Generate the epilog instructions to complete the pipeline. |
2384 | generateEpilog(Schedule, MaxStageCount, KernelBB, VRMap, EpilogBBs, |
2385 | PrologBBs); |
2386 | |
2387 | // We need this step because the register allocation doesn't handle some |
2388 | // situations well, so we insert copies to help out. |
2389 | splitLifetimes(KernelBB, EpilogBBs, Schedule); |
2390 | |
2391 | // Remove dead instructions due to loop induction variables. |
2392 | removeDeadInstructions(KernelBB, EpilogBBs); |
2393 | |
2394 | // Add branches between prolog and epilog blocks. |
2395 | addBranches(PrologBBs, KernelBB, EpilogBBs, Schedule, VRMap); |
2396 | |
2397 | // Remove the original loop since it's no longer referenced. |
2398 | for (auto &I : *BB) |
2399 | LIS.RemoveMachineInstrFromMaps(I); |
2400 | BB->clear(); |
2401 | BB->eraseFromParent(); |
2402 | |
2403 | delete[] VRMap; |
2404 | } |
2405 | |
2406 | /// Generate the pipeline prolog code. |
2407 | void SwingSchedulerDAG::generateProlog(SMSchedule &Schedule, unsigned LastStage, |
2408 | MachineBasicBlock *KernelBB, |
2409 | ValueMapTy *VRMap, |
2410 | MBBVectorTy &PrologBBs) { |
2411 | MachineBasicBlock *PreheaderBB = MLI->getLoopFor(BB)->getLoopPreheader(); |
2412 | assert(PreheaderBB != nullptr &&(static_cast <bool> (PreheaderBB != nullptr && "Need to add code to handle loops w/o preheader" ) ? void (0) : __assert_fail ("PreheaderBB != nullptr && \"Need to add code to handle loops w/o preheader\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 2413, __extension__ __PRETTY_FUNCTION__)) |
2413 | "Need to add code to handle loops w/o preheader")(static_cast <bool> (PreheaderBB != nullptr && "Need to add code to handle loops w/o preheader" ) ? void (0) : __assert_fail ("PreheaderBB != nullptr && \"Need to add code to handle loops w/o preheader\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 2413, __extension__ __PRETTY_FUNCTION__)); |
2414 | MachineBasicBlock *PredBB = PreheaderBB; |
2415 | InstrMapTy InstrMap; |
2416 | |
2417 | // Generate a basic block for each stage, not including the last stage, |
2418 | // which will be generated in the kernel. Each basic block may contain |
2419 | // instructions from multiple stages/iterations. |
2420 | for (unsigned i = 0; i < LastStage; ++i) { |
2421 | // Create and insert the prolog basic block prior to the original loop |
2422 | // basic block. The original loop is removed later. |
2423 | MachineBasicBlock *NewBB = MF.CreateMachineBasicBlock(BB->getBasicBlock()); |
2424 | PrologBBs.push_back(NewBB); |
2425 | MF.insert(BB->getIterator(), NewBB); |
2426 | NewBB->transferSuccessors(PredBB); |
2427 | PredBB->addSuccessor(NewBB); |
2428 | PredBB = NewBB; |
2429 | |
2430 | // Generate instructions for each appropriate stage. Process instructions |
2431 | // in original program order. |
2432 | for (int StageNum = i; StageNum >= 0; --StageNum) { |
2433 | for (MachineBasicBlock::iterator BBI = BB->instr_begin(), |
2434 | BBE = BB->getFirstTerminator(); |
2435 | BBI != BBE; ++BBI) { |
2436 | if (Schedule.isScheduledAtStage(getSUnit(&*BBI), (unsigned)StageNum)) { |
2437 | if (BBI->isPHI()) |
2438 | continue; |
2439 | MachineInstr *NewMI = |
2440 | cloneAndChangeInstr(&*BBI, i, (unsigned)StageNum, Schedule); |
2441 | updateInstruction(NewMI, false, i, (unsigned)StageNum, Schedule, |
2442 | VRMap); |
2443 | NewBB->push_back(NewMI); |
2444 | InstrMap[NewMI] = &*BBI; |
2445 | } |
2446 | } |
2447 | } |
2448 | rewritePhiValues(NewBB, i, Schedule, VRMap, InstrMap); |
2449 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "prolog:\n"; NewBB->dump (); }; } } while (false) |
2450 | dbgs() << "prolog:\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "prolog:\n"; NewBB->dump (); }; } } while (false) |
2451 | NewBB->dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "prolog:\n"; NewBB->dump (); }; } } while (false) |
2452 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "prolog:\n"; NewBB->dump (); }; } } while (false); |
2453 | } |
2454 | |
2455 | PredBB->replaceSuccessor(BB, KernelBB); |
2456 | |
2457 | // Check if we need to remove the branch from the preheader to the original |
2458 | // loop, and replace it with a branch to the new loop. |
2459 | unsigned numBranches = TII->removeBranch(*PreheaderBB); |
2460 | if (numBranches) { |
2461 | SmallVector<MachineOperand, 0> Cond; |
2462 | TII->insertBranch(*PreheaderBB, PrologBBs[0], nullptr, Cond, DebugLoc()); |
2463 | } |
2464 | } |
2465 | |
2466 | /// Generate the pipeline epilog code. The epilog code finishes the iterations |
2467 | /// that were started in either the prolog or the kernel. We create a basic |
2468 | /// block for each stage that needs to complete. |
2469 | void SwingSchedulerDAG::generateEpilog(SMSchedule &Schedule, unsigned LastStage, |
2470 | MachineBasicBlock *KernelBB, |
2471 | ValueMapTy *VRMap, |
2472 | MBBVectorTy &EpilogBBs, |
2473 | MBBVectorTy &PrologBBs) { |
2474 | // We need to change the branch from the kernel to the first epilog block, so |
2475 | // this call to analyze branch uses the kernel rather than the original BB. |
2476 | MachineBasicBlock *TBB = nullptr, *FBB = nullptr; |
2477 | SmallVector<MachineOperand, 4> Cond; |
2478 | bool checkBranch = TII->analyzeBranch(*KernelBB, TBB, FBB, Cond); |
2479 | assert(!checkBranch && "generateEpilog must be able to analyze the branch")(static_cast <bool> (!checkBranch && "generateEpilog must be able to analyze the branch" ) ? void (0) : __assert_fail ("!checkBranch && \"generateEpilog must be able to analyze the branch\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 2479, __extension__ __PRETTY_FUNCTION__)); |
2480 | if (checkBranch) |
2481 | return; |
2482 | |
2483 | MachineBasicBlock::succ_iterator LoopExitI = KernelBB->succ_begin(); |
2484 | if (*LoopExitI == KernelBB) |
2485 | ++LoopExitI; |
2486 | assert(LoopExitI != KernelBB->succ_end() && "Expecting a successor")(static_cast <bool> (LoopExitI != KernelBB->succ_end () && "Expecting a successor") ? void (0) : __assert_fail ("LoopExitI != KernelBB->succ_end() && \"Expecting a successor\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 2486, __extension__ __PRETTY_FUNCTION__)); |
2487 | MachineBasicBlock *LoopExitBB = *LoopExitI; |
2488 | |
2489 | MachineBasicBlock *PredBB = KernelBB; |
2490 | MachineBasicBlock *EpilogStart = LoopExitBB; |
2491 | InstrMapTy InstrMap; |
2492 | |
2493 | // Generate a basic block for each stage, not including the last stage, |
2494 | // which was generated for the kernel. Each basic block may contain |
2495 | // instructions from multiple stages/iterations. |
2496 | int EpilogStage = LastStage + 1; |
2497 | for (unsigned i = LastStage; i >= 1; --i, ++EpilogStage) { |
2498 | MachineBasicBlock *NewBB = MF.CreateMachineBasicBlock(); |
2499 | EpilogBBs.push_back(NewBB); |
2500 | MF.insert(BB->getIterator(), NewBB); |
2501 | |
2502 | PredBB->replaceSuccessor(LoopExitBB, NewBB); |
2503 | NewBB->addSuccessor(LoopExitBB); |
2504 | |
2505 | if (EpilogStart == LoopExitBB) |
2506 | EpilogStart = NewBB; |
2507 | |
2508 | // Add instructions to the epilog depending on the current block. |
2509 | // Process instructions in original program order. |
2510 | for (unsigned StageNum = i; StageNum <= LastStage; ++StageNum) { |
2511 | for (auto &BBI : *BB) { |
2512 | if (BBI.isPHI()) |
2513 | continue; |
2514 | MachineInstr *In = &BBI; |
2515 | if (Schedule.isScheduledAtStage(getSUnit(In), StageNum)) { |
2516 | // Instructions with memoperands in the epilog are updated with |
2517 | // conservative values. |
2518 | MachineInstr *NewMI = cloneInstr(In, UINT_MAX(2147483647 *2U +1U), 0); |
2519 | updateInstruction(NewMI, i == 1, EpilogStage, 0, Schedule, VRMap); |
2520 | NewBB->push_back(NewMI); |
2521 | InstrMap[NewMI] = In; |
2522 | } |
2523 | } |
2524 | } |
2525 | generateExistingPhis(NewBB, PrologBBs[i - 1], PredBB, KernelBB, Schedule, |
2526 | VRMap, InstrMap, LastStage, EpilogStage, i == 1); |
2527 | generatePhis(NewBB, PrologBBs[i - 1], PredBB, KernelBB, Schedule, VRMap, |
2528 | InstrMap, LastStage, EpilogStage, i == 1); |
2529 | PredBB = NewBB; |
2530 | |
2531 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "epilog:\n"; NewBB->dump (); }; } } while (false) |
2532 | dbgs() << "epilog:\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "epilog:\n"; NewBB->dump (); }; } } while (false) |
2533 | NewBB->dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "epilog:\n"; NewBB->dump (); }; } } while (false) |
2534 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "epilog:\n"; NewBB->dump (); }; } } while (false); |
2535 | } |
2536 | |
2537 | // Fix any Phi nodes in the loop exit block. |
2538 | for (MachineInstr &MI : *LoopExitBB) { |
2539 | if (!MI.isPHI()) |
2540 | break; |
2541 | for (unsigned i = 2, e = MI.getNumOperands() + 1; i != e; i += 2) { |
2542 | MachineOperand &MO = MI.getOperand(i); |
2543 | if (MO.getMBB() == BB) |
2544 | MO.setMBB(PredBB); |
2545 | } |
2546 | } |
2547 | |
2548 | // Create a branch to the new epilog from the kernel. |
2549 | // Remove the original branch and add a new branch to the epilog. |
2550 | TII->removeBranch(*KernelBB); |
2551 | TII->insertBranch(*KernelBB, KernelBB, EpilogStart, Cond, DebugLoc()); |
2552 | // Add a branch to the loop exit. |
2553 | if (EpilogBBs.size() > 0) { |
2554 | MachineBasicBlock *LastEpilogBB = EpilogBBs.back(); |
2555 | SmallVector<MachineOperand, 4> Cond1; |
2556 | TII->insertBranch(*LastEpilogBB, LoopExitBB, nullptr, Cond1, DebugLoc()); |
2557 | } |
2558 | } |
2559 | |
2560 | /// Replace all uses of FromReg that appear outside the specified |
2561 | /// basic block with ToReg. |
2562 | static void replaceRegUsesAfterLoop(unsigned FromReg, unsigned ToReg, |
2563 | MachineBasicBlock *MBB, |
2564 | MachineRegisterInfo &MRI, |
2565 | LiveIntervals &LIS) { |
2566 | for (MachineRegisterInfo::use_iterator I = MRI.use_begin(FromReg), |
2567 | E = MRI.use_end(); |
2568 | I != E;) { |
2569 | MachineOperand &O = *I; |
2570 | ++I; |
2571 | if (O.getParent()->getParent() != MBB) |
2572 | O.setReg(ToReg); |
2573 | } |
2574 | if (!LIS.hasInterval(ToReg)) |
2575 | LIS.createEmptyInterval(ToReg); |
2576 | } |
2577 | |
2578 | /// Return true if the register has a use that occurs outside the |
2579 | /// specified loop. |
2580 | static bool hasUseAfterLoop(unsigned Reg, MachineBasicBlock *BB, |
2581 | MachineRegisterInfo &MRI) { |
2582 | for (MachineRegisterInfo::use_iterator I = MRI.use_begin(Reg), |
2583 | E = MRI.use_end(); |
2584 | I != E; ++I) |
2585 | if (I->getParent()->getParent() != BB) |
2586 | return true; |
2587 | return false; |
2588 | } |
2589 | |
2590 | /// Generate Phis for the specific block in the generated pipelined code. |
2591 | /// This function looks at the Phis from the original code to guide the |
2592 | /// creation of new Phis. |
2593 | void SwingSchedulerDAG::generateExistingPhis( |
2594 | MachineBasicBlock *NewBB, MachineBasicBlock *BB1, MachineBasicBlock *BB2, |
2595 | MachineBasicBlock *KernelBB, SMSchedule &Schedule, ValueMapTy *VRMap, |
2596 | InstrMapTy &InstrMap, unsigned LastStageNum, unsigned CurStageNum, |
2597 | bool IsLast) { |
2598 | // Compute the stage number for the initial value of the Phi, which |
2599 | // comes from the prolog. The prolog to use depends on to which kernel/ |
2600 | // epilog that we're adding the Phi. |
2601 | unsigned PrologStage = 0; |
2602 | unsigned PrevStage = 0; |
2603 | bool InKernel = (LastStageNum == CurStageNum); |
2604 | if (InKernel) { |
2605 | PrologStage = LastStageNum - 1; |
2606 | PrevStage = CurStageNum; |
2607 | } else { |
2608 | PrologStage = LastStageNum - (CurStageNum - LastStageNum); |
2609 | PrevStage = LastStageNum + (CurStageNum - LastStageNum) - 1; |
2610 | } |
2611 | |
2612 | for (MachineBasicBlock::iterator BBI = BB->instr_begin(), |
2613 | BBE = BB->getFirstNonPHI(); |
2614 | BBI != BBE; ++BBI) { |
2615 | unsigned Def = BBI->getOperand(0).getReg(); |
2616 | |
2617 | unsigned InitVal = 0; |
2618 | unsigned LoopVal = 0; |
2619 | getPhiRegs(*BBI, BB, InitVal, LoopVal); |
2620 | |
2621 | unsigned PhiOp1 = 0; |
2622 | // The Phi value from the loop body typically is defined in the loop, but |
2623 | // not always. So, we need to check if the value is defined in the loop. |
2624 | unsigned PhiOp2 = LoopVal; |
2625 | if (VRMap[LastStageNum].count(LoopVal)) |
2626 | PhiOp2 = VRMap[LastStageNum][LoopVal]; |
2627 | |
2628 | int StageScheduled = Schedule.stageScheduled(getSUnit(&*BBI)); |
2629 | int LoopValStage = |
2630 | Schedule.stageScheduled(getSUnit(MRI.getVRegDef(LoopVal))); |
2631 | unsigned NumStages = Schedule.getStagesForReg(Def, CurStageNum); |
2632 | if (NumStages == 0) { |
2633 | // We don't need to generate a Phi anymore, but we need to rename any uses |
2634 | // of the Phi value. |
2635 | unsigned NewReg = VRMap[PrevStage][LoopVal]; |
2636 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, 0, &*BBI, |
2637 | Def, InitVal, NewReg); |
2638 | if (VRMap[CurStageNum].count(LoopVal)) |
2639 | VRMap[CurStageNum][Def] = VRMap[CurStageNum][LoopVal]; |
2640 | } |
2641 | // Adjust the number of Phis needed depending on the number of prologs left, |
2642 | // and the distance from where the Phi is first scheduled. The number of |
2643 | // Phis cannot exceed the number of prolog stages. Each stage can |
2644 | // potentially define two values. |
2645 | unsigned MaxPhis = PrologStage + 2; |
2646 | if (!InKernel && (int)PrologStage <= LoopValStage) |
2647 | MaxPhis = std::max((int)MaxPhis - (int)LoopValStage, 1); |
2648 | unsigned NumPhis = std::min(NumStages, MaxPhis); |
2649 | |
2650 | unsigned NewReg = 0; |
2651 | unsigned AccessStage = (LoopValStage != -1) ? LoopValStage : StageScheduled; |
2652 | // In the epilog, we may need to look back one stage to get the correct |
2653 | // Phi name because the epilog and prolog blocks execute the same stage. |
2654 | // The correct name is from the previous block only when the Phi has |
2655 | // been completely scheduled prior to the epilog, and Phi value is not |
2656 | // needed in multiple stages. |
2657 | int StageDiff = 0; |
2658 | if (!InKernel && StageScheduled >= LoopValStage && AccessStage == 0 && |
2659 | NumPhis == 1) |
2660 | StageDiff = 1; |
2661 | // Adjust the computations below when the phi and the loop definition |
2662 | // are scheduled in different stages. |
2663 | if (InKernel && LoopValStage != -1 && StageScheduled > LoopValStage) |
2664 | StageDiff = StageScheduled - LoopValStage; |
2665 | for (unsigned np = 0; np < NumPhis; ++np) { |
2666 | // If the Phi hasn't been scheduled, then use the initial Phi operand |
2667 | // value. Otherwise, use the scheduled version of the instruction. This |
2668 | // is a little complicated when a Phi references another Phi. |
2669 | if (np > PrologStage || StageScheduled >= (int)LastStageNum) |
2670 | PhiOp1 = InitVal; |
2671 | // Check if the Phi has already been scheduled in a prolog stage. |
2672 | else if (PrologStage >= AccessStage + StageDiff + np && |
2673 | VRMap[PrologStage - StageDiff - np].count(LoopVal) != 0) |
2674 | PhiOp1 = VRMap[PrologStage - StageDiff - np][LoopVal]; |
2675 | // Check if the Phi has already been scheduled, but the loop intruction |
2676 | // is either another Phi, or doesn't occur in the loop. |
2677 | else if (PrologStage >= AccessStage + StageDiff + np) { |
2678 | // If the Phi references another Phi, we need to examine the other |
2679 | // Phi to get the correct value. |
2680 | PhiOp1 = LoopVal; |
2681 | MachineInstr *InstOp1 = MRI.getVRegDef(PhiOp1); |
2682 | int Indirects = 1; |
2683 | while (InstOp1 && InstOp1->isPHI() && InstOp1->getParent() == BB) { |
2684 | int PhiStage = Schedule.stageScheduled(getSUnit(InstOp1)); |
2685 | if ((int)(PrologStage - StageDiff - np) < PhiStage + Indirects) |
2686 | PhiOp1 = getInitPhiReg(*InstOp1, BB); |
2687 | else |
2688 | PhiOp1 = getLoopPhiReg(*InstOp1, BB); |
2689 | InstOp1 = MRI.getVRegDef(PhiOp1); |
2690 | int PhiOpStage = Schedule.stageScheduled(getSUnit(InstOp1)); |
2691 | int StageAdj = (PhiOpStage != -1 ? PhiStage - PhiOpStage : 0); |
2692 | if (PhiOpStage != -1 && PrologStage - StageAdj >= Indirects + np && |
2693 | VRMap[PrologStage - StageAdj - Indirects - np].count(PhiOp1)) { |
2694 | PhiOp1 = VRMap[PrologStage - StageAdj - Indirects - np][PhiOp1]; |
2695 | break; |
2696 | } |
2697 | ++Indirects; |
2698 | } |
2699 | } else |
2700 | PhiOp1 = InitVal; |
2701 | // If this references a generated Phi in the kernel, get the Phi operand |
2702 | // from the incoming block. |
2703 | if (MachineInstr *InstOp1 = MRI.getVRegDef(PhiOp1)) |
2704 | if (InstOp1->isPHI() && InstOp1->getParent() == KernelBB) |
2705 | PhiOp1 = getInitPhiReg(*InstOp1, KernelBB); |
2706 | |
2707 | MachineInstr *PhiInst = MRI.getVRegDef(LoopVal); |
2708 | bool LoopDefIsPhi = PhiInst && PhiInst->isPHI(); |
2709 | // In the epilog, a map lookup is needed to get the value from the kernel, |
2710 | // or previous epilog block. How is does this depends on if the |
2711 | // instruction is scheduled in the previous block. |
2712 | if (!InKernel) { |
2713 | int StageDiffAdj = 0; |
2714 | if (LoopValStage != -1 && StageScheduled > LoopValStage) |
2715 | StageDiffAdj = StageScheduled - LoopValStage; |
2716 | // Use the loop value defined in the kernel, unless the kernel |
2717 | // contains the last definition of the Phi. |
2718 | if (np == 0 && PrevStage == LastStageNum && |
2719 | (StageScheduled != 0 || LoopValStage != 0) && |
2720 | VRMap[PrevStage - StageDiffAdj].count(LoopVal)) |
2721 | PhiOp2 = VRMap[PrevStage - StageDiffAdj][LoopVal]; |
2722 | // Use the value defined by the Phi. We add one because we switch |
2723 | // from looking at the loop value to the Phi definition. |
2724 | else if (np > 0 && PrevStage == LastStageNum && |
2725 | VRMap[PrevStage - np + 1].count(Def)) |
2726 | PhiOp2 = VRMap[PrevStage - np + 1][Def]; |
2727 | // Use the loop value defined in the kernel. |
2728 | else if ((unsigned)LoopValStage + StageDiffAdj > PrologStage + 1 && |
2729 | VRMap[PrevStage - StageDiffAdj - np].count(LoopVal)) |
2730 | PhiOp2 = VRMap[PrevStage - StageDiffAdj - np][LoopVal]; |
2731 | // Use the value defined by the Phi, unless we're generating the first |
2732 | // epilog and the Phi refers to a Phi in a different stage. |
2733 | else if (VRMap[PrevStage - np].count(Def) && |
2734 | (!LoopDefIsPhi || PrevStage != LastStageNum)) |
2735 | PhiOp2 = VRMap[PrevStage - np][Def]; |
2736 | } |
2737 | |
2738 | // Check if we can reuse an existing Phi. This occurs when a Phi |
2739 | // references another Phi, and the other Phi is scheduled in an |
2740 | // earlier stage. We can try to reuse an existing Phi up until the last |
2741 | // stage of the current Phi. |
2742 | if (LoopDefIsPhi && (int)(PrologStage - np) >= StageScheduled) { |
2743 | int LVNumStages = Schedule.getStagesForPhi(LoopVal); |
2744 | int StageDiff = (StageScheduled - LoopValStage); |
2745 | LVNumStages -= StageDiff; |
2746 | // Make sure the loop value Phi has been processed already. |
2747 | if (LVNumStages > (int)np && VRMap[CurStageNum].count(LoopVal)) { |
2748 | NewReg = PhiOp2; |
Value stored to 'NewReg' is never read | |
2749 | unsigned ReuseStage = CurStageNum; |
2750 | if (Schedule.isLoopCarried(this, *PhiInst)) |
2751 | ReuseStage -= LVNumStages; |
2752 | // Check if the Phi to reuse has been generated yet. If not, then |
2753 | // there is nothing to reuse. |
2754 | if (VRMap[ReuseStage - np].count(LoopVal)) { |
2755 | NewReg = VRMap[ReuseStage - np][LoopVal]; |
2756 | |
2757 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, |
2758 | &*BBI, Def, NewReg); |
2759 | // Update the map with the new Phi name. |
2760 | VRMap[CurStageNum - np][Def] = NewReg; |
2761 | PhiOp2 = NewReg; |
2762 | if (VRMap[LastStageNum - np - 1].count(LoopVal)) |
2763 | PhiOp2 = VRMap[LastStageNum - np - 1][LoopVal]; |
2764 | |
2765 | if (IsLast && np == NumPhis - 1) |
2766 | replaceRegUsesAfterLoop(Def, NewReg, BB, MRI, LIS); |
2767 | continue; |
2768 | } |
2769 | } else if (InKernel && StageDiff > 0 && |
2770 | VRMap[CurStageNum - StageDiff - np].count(LoopVal)) |
2771 | PhiOp2 = VRMap[CurStageNum - StageDiff - np][LoopVal]; |
2772 | } |
2773 | |
2774 | const TargetRegisterClass *RC = MRI.getRegClass(Def); |
2775 | NewReg = MRI.createVirtualRegister(RC); |
2776 | |
2777 | MachineInstrBuilder NewPhi = |
2778 | BuildMI(*NewBB, NewBB->getFirstNonPHI(), DebugLoc(), |
2779 | TII->get(TargetOpcode::PHI), NewReg); |
2780 | NewPhi.addReg(PhiOp1).addMBB(BB1); |
2781 | NewPhi.addReg(PhiOp2).addMBB(BB2); |
2782 | if (np == 0) |
2783 | InstrMap[NewPhi] = &*BBI; |
2784 | |
2785 | // We define the Phis after creating the new pipelined code, so |
2786 | // we need to rename the Phi values in scheduled instructions. |
2787 | |
2788 | unsigned PrevReg = 0; |
2789 | if (InKernel && VRMap[PrevStage - np].count(LoopVal)) |
2790 | PrevReg = VRMap[PrevStage - np][LoopVal]; |
2791 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, &*BBI, |
2792 | Def, NewReg, PrevReg); |
2793 | // If the Phi has been scheduled, use the new name for rewriting. |
2794 | if (VRMap[CurStageNum - np].count(Def)) { |
2795 | unsigned R = VRMap[CurStageNum - np][Def]; |
2796 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, &*BBI, |
2797 | R, NewReg); |
2798 | } |
2799 | |
2800 | // Check if we need to rename any uses that occurs after the loop. The |
2801 | // register to replace depends on whether the Phi is scheduled in the |
2802 | // epilog. |
2803 | if (IsLast && np == NumPhis - 1) |
2804 | replaceRegUsesAfterLoop(Def, NewReg, BB, MRI, LIS); |
2805 | |
2806 | // In the kernel, a dependent Phi uses the value from this Phi. |
2807 | if (InKernel) |
2808 | PhiOp2 = NewReg; |
2809 | |
2810 | // Update the map with the new Phi name. |
2811 | VRMap[CurStageNum - np][Def] = NewReg; |
2812 | } |
2813 | |
2814 | while (NumPhis++ < NumStages) { |
2815 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, NumPhis, |
2816 | &*BBI, Def, NewReg, 0); |
2817 | } |
2818 | |
2819 | // Check if we need to rename a Phi that has been eliminated due to |
2820 | // scheduling. |
2821 | if (NumStages == 0 && IsLast && VRMap[CurStageNum].count(LoopVal)) |
2822 | replaceRegUsesAfterLoop(Def, VRMap[CurStageNum][LoopVal], BB, MRI, LIS); |
2823 | } |
2824 | } |
2825 | |
2826 | /// Generate Phis for the specified block in the generated pipelined code. |
2827 | /// These are new Phis needed because the definition is scheduled after the |
2828 | /// use in the pipelined sequence. |
2829 | void SwingSchedulerDAG::generatePhis( |
2830 | MachineBasicBlock *NewBB, MachineBasicBlock *BB1, MachineBasicBlock *BB2, |
2831 | MachineBasicBlock *KernelBB, SMSchedule &Schedule, ValueMapTy *VRMap, |
2832 | InstrMapTy &InstrMap, unsigned LastStageNum, unsigned CurStageNum, |
2833 | bool IsLast) { |
2834 | // Compute the stage number that contains the initial Phi value, and |
2835 | // the Phi from the previous stage. |
2836 | unsigned PrologStage = 0; |
2837 | unsigned PrevStage = 0; |
2838 | unsigned StageDiff = CurStageNum - LastStageNum; |
2839 | bool InKernel = (StageDiff == 0); |
2840 | if (InKernel) { |
2841 | PrologStage = LastStageNum - 1; |
2842 | PrevStage = CurStageNum; |
2843 | } else { |
2844 | PrologStage = LastStageNum - StageDiff; |
2845 | PrevStage = LastStageNum + StageDiff - 1; |
2846 | } |
2847 | |
2848 | for (MachineBasicBlock::iterator BBI = BB->getFirstNonPHI(), |
2849 | BBE = BB->instr_end(); |
2850 | BBI != BBE; ++BBI) { |
2851 | for (unsigned i = 0, e = BBI->getNumOperands(); i != e; ++i) { |
2852 | MachineOperand &MO = BBI->getOperand(i); |
2853 | if (!MO.isReg() || !MO.isDef() || |
2854 | !TargetRegisterInfo::isVirtualRegister(MO.getReg())) |
2855 | continue; |
2856 | |
2857 | int StageScheduled = Schedule.stageScheduled(getSUnit(&*BBI)); |
2858 | assert(StageScheduled != -1 && "Expecting scheduled instruction.")(static_cast <bool> (StageScheduled != -1 && "Expecting scheduled instruction." ) ? void (0) : __assert_fail ("StageScheduled != -1 && \"Expecting scheduled instruction.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 2858, __extension__ __PRETTY_FUNCTION__)); |
2859 | unsigned Def = MO.getReg(); |
2860 | unsigned NumPhis = Schedule.getStagesForReg(Def, CurStageNum); |
2861 | // An instruction scheduled in stage 0 and is used after the loop |
2862 | // requires a phi in the epilog for the last definition from either |
2863 | // the kernel or prolog. |
2864 | if (!InKernel && NumPhis == 0 && StageScheduled == 0 && |
2865 | hasUseAfterLoop(Def, BB, MRI)) |
2866 | NumPhis = 1; |
2867 | if (!InKernel && (unsigned)StageScheduled > PrologStage) |
2868 | continue; |
2869 | |
2870 | unsigned PhiOp2 = VRMap[PrevStage][Def]; |
2871 | if (MachineInstr *InstOp2 = MRI.getVRegDef(PhiOp2)) |
2872 | if (InstOp2->isPHI() && InstOp2->getParent() == NewBB) |
2873 | PhiOp2 = getLoopPhiReg(*InstOp2, BB2); |
2874 | // The number of Phis can't exceed the number of prolog stages. The |
2875 | // prolog stage number is zero based. |
2876 | if (NumPhis > PrologStage + 1 - StageScheduled) |
2877 | NumPhis = PrologStage + 1 - StageScheduled; |
2878 | for (unsigned np = 0; np < NumPhis; ++np) { |
2879 | unsigned PhiOp1 = VRMap[PrologStage][Def]; |
2880 | if (np <= PrologStage) |
2881 | PhiOp1 = VRMap[PrologStage - np][Def]; |
2882 | if (MachineInstr *InstOp1 = MRI.getVRegDef(PhiOp1)) { |
2883 | if (InstOp1->isPHI() && InstOp1->getParent() == KernelBB) |
2884 | PhiOp1 = getInitPhiReg(*InstOp1, KernelBB); |
2885 | if (InstOp1->isPHI() && InstOp1->getParent() == NewBB) |
2886 | PhiOp1 = getInitPhiReg(*InstOp1, NewBB); |
2887 | } |
2888 | if (!InKernel) |
2889 | PhiOp2 = VRMap[PrevStage - np][Def]; |
2890 | |
2891 | const TargetRegisterClass *RC = MRI.getRegClass(Def); |
2892 | unsigned NewReg = MRI.createVirtualRegister(RC); |
2893 | |
2894 | MachineInstrBuilder NewPhi = |
2895 | BuildMI(*NewBB, NewBB->getFirstNonPHI(), DebugLoc(), |
2896 | TII->get(TargetOpcode::PHI), NewReg); |
2897 | NewPhi.addReg(PhiOp1).addMBB(BB1); |
2898 | NewPhi.addReg(PhiOp2).addMBB(BB2); |
2899 | if (np == 0) |
2900 | InstrMap[NewPhi] = &*BBI; |
2901 | |
2902 | // Rewrite uses and update the map. The actions depend upon whether |
2903 | // we generating code for the kernel or epilog blocks. |
2904 | if (InKernel) { |
2905 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, |
2906 | &*BBI, PhiOp1, NewReg); |
2907 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, |
2908 | &*BBI, PhiOp2, NewReg); |
2909 | |
2910 | PhiOp2 = NewReg; |
2911 | VRMap[PrevStage - np - 1][Def] = NewReg; |
2912 | } else { |
2913 | VRMap[CurStageNum - np][Def] = NewReg; |
2914 | if (np == NumPhis - 1) |
2915 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, CurStageNum, np, |
2916 | &*BBI, Def, NewReg); |
2917 | } |
2918 | if (IsLast && np == NumPhis - 1) |
2919 | replaceRegUsesAfterLoop(Def, NewReg, BB, MRI, LIS); |
2920 | } |
2921 | } |
2922 | } |
2923 | } |
2924 | |
2925 | /// Remove instructions that generate values with no uses. |
2926 | /// Typically, these are induction variable operations that generate values |
2927 | /// used in the loop itself. A dead instruction has a definition with |
2928 | /// no uses, or uses that occur in the original loop only. |
2929 | void SwingSchedulerDAG::removeDeadInstructions(MachineBasicBlock *KernelBB, |
2930 | MBBVectorTy &EpilogBBs) { |
2931 | // For each epilog block, check that the value defined by each instruction |
2932 | // is used. If not, delete it. |
2933 | for (MBBVectorTy::reverse_iterator MBB = EpilogBBs.rbegin(), |
2934 | MBE = EpilogBBs.rend(); |
2935 | MBB != MBE; ++MBB) |
2936 | for (MachineBasicBlock::reverse_instr_iterator MI = (*MBB)->instr_rbegin(), |
2937 | ME = (*MBB)->instr_rend(); |
2938 | MI != ME;) { |
2939 | // From DeadMachineInstructionElem. Don't delete inline assembly. |
2940 | if (MI->isInlineAsm()) { |
2941 | ++MI; |
2942 | continue; |
2943 | } |
2944 | bool SawStore = false; |
2945 | // Check if it's safe to remove the instruction due to side effects. |
2946 | // We can, and want to, remove Phis here. |
2947 | if (!MI->isSafeToMove(nullptr, SawStore) && !MI->isPHI()) { |
2948 | ++MI; |
2949 | continue; |
2950 | } |
2951 | bool used = true; |
2952 | for (MachineInstr::mop_iterator MOI = MI->operands_begin(), |
2953 | MOE = MI->operands_end(); |
2954 | MOI != MOE; ++MOI) { |
2955 | if (!MOI->isReg() || !MOI->isDef()) |
2956 | continue; |
2957 | unsigned reg = MOI->getReg(); |
2958 | // Assume physical registers are used, unless they are marked dead. |
2959 | if (TargetRegisterInfo::isPhysicalRegister(reg)) { |
2960 | used = !MOI->isDead(); |
2961 | if (used) |
2962 | break; |
2963 | continue; |
2964 | } |
2965 | unsigned realUses = 0; |
2966 | for (MachineRegisterInfo::use_iterator UI = MRI.use_begin(reg), |
2967 | EI = MRI.use_end(); |
2968 | UI != EI; ++UI) { |
2969 | // Check if there are any uses that occur only in the original |
2970 | // loop. If so, that's not a real use. |
2971 | if (UI->getParent()->getParent() != BB) { |
2972 | realUses++; |
2973 | used = true; |
2974 | break; |
2975 | } |
2976 | } |
2977 | if (realUses > 0) |
2978 | break; |
2979 | used = false; |
2980 | } |
2981 | if (!used) { |
2982 | LIS.RemoveMachineInstrFromMaps(*MI); |
2983 | MI++->eraseFromParent(); |
2984 | continue; |
2985 | } |
2986 | ++MI; |
2987 | } |
2988 | // In the kernel block, check if we can remove a Phi that generates a value |
2989 | // used in an instruction removed in the epilog block. |
2990 | for (MachineBasicBlock::iterator BBI = KernelBB->instr_begin(), |
2991 | BBE = KernelBB->getFirstNonPHI(); |
2992 | BBI != BBE;) { |
2993 | MachineInstr *MI = &*BBI; |
2994 | ++BBI; |
2995 | unsigned reg = MI->getOperand(0).getReg(); |
2996 | if (MRI.use_begin(reg) == MRI.use_end()) { |
2997 | LIS.RemoveMachineInstrFromMaps(*MI); |
2998 | MI->eraseFromParent(); |
2999 | } |
3000 | } |
3001 | } |
3002 | |
3003 | /// For loop carried definitions, we split the lifetime of a virtual register |
3004 | /// that has uses past the definition in the next iteration. A copy with a new |
3005 | /// virtual register is inserted before the definition, which helps with |
3006 | /// generating a better register assignment. |
3007 | /// |
3008 | /// v1 = phi(a, v2) v1 = phi(a, v2) |
3009 | /// v2 = phi(b, v3) v2 = phi(b, v3) |
3010 | /// v3 = .. v4 = copy v1 |
3011 | /// .. = V1 v3 = .. |
3012 | /// .. = v4 |
3013 | void SwingSchedulerDAG::splitLifetimes(MachineBasicBlock *KernelBB, |
3014 | MBBVectorTy &EpilogBBs, |
3015 | SMSchedule &Schedule) { |
3016 | const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); |
3017 | for (auto &PHI : KernelBB->phis()) { |
3018 | unsigned Def = PHI.getOperand(0).getReg(); |
3019 | // Check for any Phi definition that used as an operand of another Phi |
3020 | // in the same block. |
3021 | for (MachineRegisterInfo::use_instr_iterator I = MRI.use_instr_begin(Def), |
3022 | E = MRI.use_instr_end(); |
3023 | I != E; ++I) { |
3024 | if (I->isPHI() && I->getParent() == KernelBB) { |
3025 | // Get the loop carried definition. |
3026 | unsigned LCDef = getLoopPhiReg(PHI, KernelBB); |
3027 | if (!LCDef) |
3028 | continue; |
3029 | MachineInstr *MI = MRI.getVRegDef(LCDef); |
3030 | if (!MI || MI->getParent() != KernelBB || MI->isPHI()) |
3031 | continue; |
3032 | // Search through the rest of the block looking for uses of the Phi |
3033 | // definition. If one occurs, then split the lifetime. |
3034 | unsigned SplitReg = 0; |
3035 | for (auto &BBJ : make_range(MachineBasicBlock::instr_iterator(MI), |
3036 | KernelBB->instr_end())) |
3037 | if (BBJ.readsRegister(Def)) { |
3038 | // We split the lifetime when we find the first use. |
3039 | if (SplitReg == 0) { |
3040 | SplitReg = MRI.createVirtualRegister(MRI.getRegClass(Def)); |
3041 | BuildMI(*KernelBB, MI, MI->getDebugLoc(), |
3042 | TII->get(TargetOpcode::COPY), SplitReg) |
3043 | .addReg(Def); |
3044 | } |
3045 | BBJ.substituteRegister(Def, SplitReg, 0, *TRI); |
3046 | } |
3047 | if (!SplitReg) |
3048 | continue; |
3049 | // Search through each of the epilog blocks for any uses to be renamed. |
3050 | for (auto &Epilog : EpilogBBs) |
3051 | for (auto &I : *Epilog) |
3052 | if (I.readsRegister(Def)) |
3053 | I.substituteRegister(Def, SplitReg, 0, *TRI); |
3054 | break; |
3055 | } |
3056 | } |
3057 | } |
3058 | } |
3059 | |
3060 | /// Remove the incoming block from the Phis in a basic block. |
3061 | static void removePhis(MachineBasicBlock *BB, MachineBasicBlock *Incoming) { |
3062 | for (MachineInstr &MI : *BB) { |
3063 | if (!MI.isPHI()) |
3064 | break; |
3065 | for (unsigned i = 1, e = MI.getNumOperands(); i != e; i += 2) |
3066 | if (MI.getOperand(i + 1).getMBB() == Incoming) { |
3067 | MI.RemoveOperand(i + 1); |
3068 | MI.RemoveOperand(i); |
3069 | break; |
3070 | } |
3071 | } |
3072 | } |
3073 | |
3074 | /// Create branches from each prolog basic block to the appropriate epilog |
3075 | /// block. These edges are needed if the loop ends before reaching the |
3076 | /// kernel. |
3077 | void SwingSchedulerDAG::addBranches(MBBVectorTy &PrologBBs, |
3078 | MachineBasicBlock *KernelBB, |
3079 | MBBVectorTy &EpilogBBs, |
3080 | SMSchedule &Schedule, ValueMapTy *VRMap) { |
3081 | assert(PrologBBs.size() == EpilogBBs.size() && "Prolog/Epilog mismatch")(static_cast <bool> (PrologBBs.size() == EpilogBBs.size () && "Prolog/Epilog mismatch") ? void (0) : __assert_fail ("PrologBBs.size() == EpilogBBs.size() && \"Prolog/Epilog mismatch\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3081, __extension__ __PRETTY_FUNCTION__)); |
3082 | MachineInstr *IndVar = Pass.LI.LoopInductionVar; |
3083 | MachineInstr *Cmp = Pass.LI.LoopCompare; |
3084 | MachineBasicBlock *LastPro = KernelBB; |
3085 | MachineBasicBlock *LastEpi = KernelBB; |
3086 | |
3087 | // Start from the blocks connected to the kernel and work "out" |
3088 | // to the first prolog and the last epilog blocks. |
3089 | SmallVector<MachineInstr *, 4> PrevInsts; |
3090 | unsigned MaxIter = PrologBBs.size() - 1; |
3091 | unsigned LC = UINT_MAX(2147483647 *2U +1U); |
3092 | unsigned LCMin = UINT_MAX(2147483647 *2U +1U); |
3093 | for (unsigned i = 0, j = MaxIter; i <= MaxIter; ++i, --j) { |
3094 | // Add branches to the prolog that go to the corresponding |
3095 | // epilog, and the fall-thru prolog/kernel block. |
3096 | MachineBasicBlock *Prolog = PrologBBs[j]; |
3097 | MachineBasicBlock *Epilog = EpilogBBs[i]; |
3098 | // We've executed one iteration, so decrement the loop count and check for |
3099 | // the loop end. |
3100 | SmallVector<MachineOperand, 4> Cond; |
3101 | // Check if the LOOP0 has already been removed. If so, then there is no need |
3102 | // to reduce the trip count. |
3103 | if (LC != 0) |
3104 | LC = TII->reduceLoopCount(*Prolog, IndVar, *Cmp, Cond, PrevInsts, j, |
3105 | MaxIter); |
3106 | |
3107 | // Record the value of the first trip count, which is used to determine if |
3108 | // branches and blocks can be removed for constant trip counts. |
3109 | if (LCMin == UINT_MAX(2147483647 *2U +1U)) |
3110 | LCMin = LC; |
3111 | |
3112 | unsigned numAdded = 0; |
3113 | if (TargetRegisterInfo::isVirtualRegister(LC)) { |
3114 | Prolog->addSuccessor(Epilog); |
3115 | numAdded = TII->insertBranch(*Prolog, Epilog, LastPro, Cond, DebugLoc()); |
3116 | } else if (j >= LCMin) { |
3117 | Prolog->addSuccessor(Epilog); |
3118 | Prolog->removeSuccessor(LastPro); |
3119 | LastEpi->removeSuccessor(Epilog); |
3120 | numAdded = TII->insertBranch(*Prolog, Epilog, nullptr, Cond, DebugLoc()); |
3121 | removePhis(Epilog, LastEpi); |
3122 | // Remove the blocks that are no longer referenced. |
3123 | if (LastPro != LastEpi) { |
3124 | LastEpi->clear(); |
3125 | LastEpi->eraseFromParent(); |
3126 | } |
3127 | LastPro->clear(); |
3128 | LastPro->eraseFromParent(); |
3129 | } else { |
3130 | numAdded = TII->insertBranch(*Prolog, LastPro, nullptr, Cond, DebugLoc()); |
3131 | removePhis(Epilog, Prolog); |
3132 | } |
3133 | LastPro = Prolog; |
3134 | LastEpi = Epilog; |
3135 | for (MachineBasicBlock::reverse_instr_iterator I = Prolog->instr_rbegin(), |
3136 | E = Prolog->instr_rend(); |
3137 | I != E && numAdded > 0; ++I, --numAdded) |
3138 | updateInstruction(&*I, false, j, 0, Schedule, VRMap); |
3139 | } |
3140 | } |
3141 | |
3142 | /// Return true if we can compute the amount the instruction changes |
3143 | /// during each iteration. Set Delta to the amount of the change. |
3144 | bool SwingSchedulerDAG::computeDelta(MachineInstr &MI, unsigned &Delta) { |
3145 | const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); |
3146 | unsigned BaseReg; |
3147 | int64_t Offset; |
3148 | if (!TII->getMemOpBaseRegImmOfs(MI, BaseReg, Offset, TRI)) |
3149 | return false; |
3150 | |
3151 | MachineRegisterInfo &MRI = MF.getRegInfo(); |
3152 | // Check if there is a Phi. If so, get the definition in the loop. |
3153 | MachineInstr *BaseDef = MRI.getVRegDef(BaseReg); |
3154 | if (BaseDef && BaseDef->isPHI()) { |
3155 | BaseReg = getLoopPhiReg(*BaseDef, MI.getParent()); |
3156 | BaseDef = MRI.getVRegDef(BaseReg); |
3157 | } |
3158 | if (!BaseDef) |
3159 | return false; |
3160 | |
3161 | int D = 0; |
3162 | if (!TII->getIncrementValue(*BaseDef, D) && D >= 0) |
3163 | return false; |
3164 | |
3165 | Delta = D; |
3166 | return true; |
3167 | } |
3168 | |
3169 | /// Update the memory operand with a new offset when the pipeliner |
3170 | /// generates a new copy of the instruction that refers to a |
3171 | /// different memory location. |
3172 | void SwingSchedulerDAG::updateMemOperands(MachineInstr &NewMI, |
3173 | MachineInstr &OldMI, unsigned Num) { |
3174 | if (Num == 0) |
3175 | return; |
3176 | // If the instruction has memory operands, then adjust the offset |
3177 | // when the instruction appears in different stages. |
3178 | unsigned NumRefs = NewMI.memoperands_end() - NewMI.memoperands_begin(); |
3179 | if (NumRefs == 0) |
3180 | return; |
3181 | MachineInstr::mmo_iterator NewMemRefs = MF.allocateMemRefsArray(NumRefs); |
3182 | unsigned Refs = 0; |
3183 | for (MachineMemOperand *MMO : NewMI.memoperands()) { |
3184 | if (MMO->isVolatile() || (MMO->isInvariant() && MMO->isDereferenceable()) || |
3185 | (!MMO->getValue())) { |
3186 | NewMemRefs[Refs++] = MMO; |
3187 | continue; |
3188 | } |
3189 | unsigned Delta; |
3190 | if (Num != UINT_MAX(2147483647 *2U +1U) && computeDelta(OldMI, Delta)) { |
3191 | int64_t AdjOffset = Delta * Num; |
3192 | NewMemRefs[Refs++] = |
3193 | MF.getMachineMemOperand(MMO, AdjOffset, MMO->getSize()); |
3194 | } else { |
3195 | NewMI.dropMemRefs(); |
3196 | return; |
3197 | } |
3198 | } |
3199 | NewMI.setMemRefs(NewMemRefs, NewMemRefs + NumRefs); |
3200 | } |
3201 | |
3202 | /// Clone the instruction for the new pipelined loop and update the |
3203 | /// memory operands, if needed. |
3204 | MachineInstr *SwingSchedulerDAG::cloneInstr(MachineInstr *OldMI, |
3205 | unsigned CurStageNum, |
3206 | unsigned InstStageNum) { |
3207 | MachineInstr *NewMI = MF.CloneMachineInstr(OldMI); |
3208 | // Check for tied operands in inline asm instructions. This should be handled |
3209 | // elsewhere, but I'm not sure of the best solution. |
3210 | if (OldMI->isInlineAsm()) |
3211 | for (unsigned i = 0, e = OldMI->getNumOperands(); i != e; ++i) { |
3212 | const auto &MO = OldMI->getOperand(i); |
3213 | if (MO.isReg() && MO.isUse()) |
3214 | break; |
3215 | unsigned UseIdx; |
3216 | if (OldMI->isRegTiedToUseOperand(i, &UseIdx)) |
3217 | NewMI->tieOperands(i, UseIdx); |
3218 | } |
3219 | updateMemOperands(*NewMI, *OldMI, CurStageNum - InstStageNum); |
3220 | return NewMI; |
3221 | } |
3222 | |
3223 | /// Clone the instruction for the new pipelined loop. If needed, this |
3224 | /// function updates the instruction using the values saved in the |
3225 | /// InstrChanges structure. |
3226 | MachineInstr *SwingSchedulerDAG::cloneAndChangeInstr(MachineInstr *OldMI, |
3227 | unsigned CurStageNum, |
3228 | unsigned InstStageNum, |
3229 | SMSchedule &Schedule) { |
3230 | MachineInstr *NewMI = MF.CloneMachineInstr(OldMI); |
3231 | DenseMap<SUnit *, std::pair<unsigned, int64_t>>::iterator It = |
3232 | InstrChanges.find(getSUnit(OldMI)); |
3233 | if (It != InstrChanges.end()) { |
3234 | std::pair<unsigned, int64_t> RegAndOffset = It->second; |
3235 | unsigned BasePos, OffsetPos; |
3236 | if (!TII->getBaseAndOffsetPosition(*OldMI, BasePos, OffsetPos)) |
3237 | return nullptr; |
3238 | int64_t NewOffset = OldMI->getOperand(OffsetPos).getImm(); |
3239 | MachineInstr *LoopDef = findDefInLoop(RegAndOffset.first); |
3240 | if (Schedule.stageScheduled(getSUnit(LoopDef)) > (signed)InstStageNum) |
3241 | NewOffset += RegAndOffset.second * (CurStageNum - InstStageNum); |
3242 | NewMI->getOperand(OffsetPos).setImm(NewOffset); |
3243 | } |
3244 | updateMemOperands(*NewMI, *OldMI, CurStageNum - InstStageNum); |
3245 | return NewMI; |
3246 | } |
3247 | |
3248 | /// Update the machine instruction with new virtual registers. This |
3249 | /// function may change the defintions and/or uses. |
3250 | void SwingSchedulerDAG::updateInstruction(MachineInstr *NewMI, bool LastDef, |
3251 | unsigned CurStageNum, |
3252 | unsigned InstrStageNum, |
3253 | SMSchedule &Schedule, |
3254 | ValueMapTy *VRMap) { |
3255 | for (unsigned i = 0, e = NewMI->getNumOperands(); i != e; ++i) { |
3256 | MachineOperand &MO = NewMI->getOperand(i); |
3257 | if (!MO.isReg() || !TargetRegisterInfo::isVirtualRegister(MO.getReg())) |
3258 | continue; |
3259 | unsigned reg = MO.getReg(); |
3260 | if (MO.isDef()) { |
3261 | // Create a new virtual register for the definition. |
3262 | const TargetRegisterClass *RC = MRI.getRegClass(reg); |
3263 | unsigned NewReg = MRI.createVirtualRegister(RC); |
3264 | MO.setReg(NewReg); |
3265 | VRMap[CurStageNum][reg] = NewReg; |
3266 | if (LastDef) |
3267 | replaceRegUsesAfterLoop(reg, NewReg, BB, MRI, LIS); |
3268 | } else if (MO.isUse()) { |
3269 | MachineInstr *Def = MRI.getVRegDef(reg); |
3270 | // Compute the stage that contains the last definition for instruction. |
3271 | int DefStageNum = Schedule.stageScheduled(getSUnit(Def)); |
3272 | unsigned StageNum = CurStageNum; |
3273 | if (DefStageNum != -1 && (int)InstrStageNum > DefStageNum) { |
3274 | // Compute the difference in stages between the defintion and the use. |
3275 | unsigned StageDiff = (InstrStageNum - DefStageNum); |
3276 | // Make an adjustment to get the last definition. |
3277 | StageNum -= StageDiff; |
3278 | } |
3279 | if (VRMap[StageNum].count(reg)) |
3280 | MO.setReg(VRMap[StageNum][reg]); |
3281 | } |
3282 | } |
3283 | } |
3284 | |
3285 | /// Return the instruction in the loop that defines the register. |
3286 | /// If the definition is a Phi, then follow the Phi operand to |
3287 | /// the instruction in the loop. |
3288 | MachineInstr *SwingSchedulerDAG::findDefInLoop(unsigned Reg) { |
3289 | SmallPtrSet<MachineInstr *, 8> Visited; |
3290 | MachineInstr *Def = MRI.getVRegDef(Reg); |
3291 | while (Def->isPHI()) { |
3292 | if (!Visited.insert(Def).second) |
3293 | break; |
3294 | for (unsigned i = 1, e = Def->getNumOperands(); i < e; i += 2) |
3295 | if (Def->getOperand(i + 1).getMBB() == BB) { |
3296 | Def = MRI.getVRegDef(Def->getOperand(i).getReg()); |
3297 | break; |
3298 | } |
3299 | } |
3300 | return Def; |
3301 | } |
3302 | |
3303 | /// Return the new name for the value from the previous stage. |
3304 | unsigned SwingSchedulerDAG::getPrevMapVal(unsigned StageNum, unsigned PhiStage, |
3305 | unsigned LoopVal, unsigned LoopStage, |
3306 | ValueMapTy *VRMap, |
3307 | MachineBasicBlock *BB) { |
3308 | unsigned PrevVal = 0; |
3309 | if (StageNum > PhiStage) { |
3310 | MachineInstr *LoopInst = MRI.getVRegDef(LoopVal); |
3311 | if (PhiStage == LoopStage && VRMap[StageNum - 1].count(LoopVal)) |
3312 | // The name is defined in the previous stage. |
3313 | PrevVal = VRMap[StageNum - 1][LoopVal]; |
3314 | else if (VRMap[StageNum].count(LoopVal)) |
3315 | // The previous name is defined in the current stage when the instruction |
3316 | // order is swapped. |
3317 | PrevVal = VRMap[StageNum][LoopVal]; |
3318 | else if (!LoopInst->isPHI() || LoopInst->getParent() != BB) |
3319 | // The loop value hasn't yet been scheduled. |
3320 | PrevVal = LoopVal; |
3321 | else if (StageNum == PhiStage + 1) |
3322 | // The loop value is another phi, which has not been scheduled. |
3323 | PrevVal = getInitPhiReg(*LoopInst, BB); |
3324 | else if (StageNum > PhiStage + 1 && LoopInst->getParent() == BB) |
3325 | // The loop value is another phi, which has been scheduled. |
3326 | PrevVal = |
3327 | getPrevMapVal(StageNum - 1, PhiStage, getLoopPhiReg(*LoopInst, BB), |
3328 | LoopStage, VRMap, BB); |
3329 | } |
3330 | return PrevVal; |
3331 | } |
3332 | |
3333 | /// Rewrite the Phi values in the specified block to use the mappings |
3334 | /// from the initial operand. Once the Phi is scheduled, we switch |
3335 | /// to using the loop value instead of the Phi value, so those names |
3336 | /// do not need to be rewritten. |
3337 | void SwingSchedulerDAG::rewritePhiValues(MachineBasicBlock *NewBB, |
3338 | unsigned StageNum, |
3339 | SMSchedule &Schedule, |
3340 | ValueMapTy *VRMap, |
3341 | InstrMapTy &InstrMap) { |
3342 | for (auto &PHI : BB->phis()) { |
3343 | unsigned InitVal = 0; |
3344 | unsigned LoopVal = 0; |
3345 | getPhiRegs(PHI, BB, InitVal, LoopVal); |
3346 | unsigned PhiDef = PHI.getOperand(0).getReg(); |
3347 | |
3348 | unsigned PhiStage = |
3349 | (unsigned)Schedule.stageScheduled(getSUnit(MRI.getVRegDef(PhiDef))); |
3350 | unsigned LoopStage = |
3351 | (unsigned)Schedule.stageScheduled(getSUnit(MRI.getVRegDef(LoopVal))); |
3352 | unsigned NumPhis = Schedule.getStagesForPhi(PhiDef); |
3353 | if (NumPhis > StageNum) |
3354 | NumPhis = StageNum; |
3355 | for (unsigned np = 0; np <= NumPhis; ++np) { |
3356 | unsigned NewVal = |
3357 | getPrevMapVal(StageNum - np, PhiStage, LoopVal, LoopStage, VRMap, BB); |
3358 | if (!NewVal) |
3359 | NewVal = InitVal; |
3360 | rewriteScheduledInstr(NewBB, Schedule, InstrMap, StageNum - np, np, &PHI, |
3361 | PhiDef, NewVal); |
3362 | } |
3363 | } |
3364 | } |
3365 | |
3366 | /// Rewrite a previously scheduled instruction to use the register value |
3367 | /// from the new instruction. Make sure the instruction occurs in the |
3368 | /// basic block, and we don't change the uses in the new instruction. |
3369 | void SwingSchedulerDAG::rewriteScheduledInstr( |
3370 | MachineBasicBlock *BB, SMSchedule &Schedule, InstrMapTy &InstrMap, |
3371 | unsigned CurStageNum, unsigned PhiNum, MachineInstr *Phi, unsigned OldReg, |
3372 | unsigned NewReg, unsigned PrevReg) { |
3373 | bool InProlog = (CurStageNum < Schedule.getMaxStageCount()); |
3374 | int StagePhi = Schedule.stageScheduled(getSUnit(Phi)) + PhiNum; |
3375 | // Rewrite uses that have been scheduled already to use the new |
3376 | // Phi register. |
3377 | for (MachineRegisterInfo::use_iterator UI = MRI.use_begin(OldReg), |
3378 | EI = MRI.use_end(); |
3379 | UI != EI;) { |
3380 | MachineOperand &UseOp = *UI; |
3381 | MachineInstr *UseMI = UseOp.getParent(); |
3382 | ++UI; |
3383 | if (UseMI->getParent() != BB) |
3384 | continue; |
3385 | if (UseMI->isPHI()) { |
3386 | if (!Phi->isPHI() && UseMI->getOperand(0).getReg() == NewReg) |
3387 | continue; |
3388 | if (getLoopPhiReg(*UseMI, BB) != OldReg) |
3389 | continue; |
3390 | } |
3391 | InstrMapTy::iterator OrigInstr = InstrMap.find(UseMI); |
3392 | assert(OrigInstr != InstrMap.end() && "Instruction not scheduled.")(static_cast <bool> (OrigInstr != InstrMap.end() && "Instruction not scheduled.") ? void (0) : __assert_fail ("OrigInstr != InstrMap.end() && \"Instruction not scheduled.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3392, __extension__ __PRETTY_FUNCTION__)); |
3393 | SUnit *OrigMISU = getSUnit(OrigInstr->second); |
3394 | int StageSched = Schedule.stageScheduled(OrigMISU); |
3395 | int CycleSched = Schedule.cycleScheduled(OrigMISU); |
3396 | unsigned ReplaceReg = 0; |
3397 | // This is the stage for the scheduled instruction. |
3398 | if (StagePhi == StageSched && Phi->isPHI()) { |
3399 | int CyclePhi = Schedule.cycleScheduled(getSUnit(Phi)); |
3400 | if (PrevReg && InProlog) |
3401 | ReplaceReg = PrevReg; |
3402 | else if (PrevReg && !Schedule.isLoopCarried(this, *Phi) && |
3403 | (CyclePhi <= CycleSched || OrigMISU->getInstr()->isPHI())) |
3404 | ReplaceReg = PrevReg; |
3405 | else |
3406 | ReplaceReg = NewReg; |
3407 | } |
3408 | // The scheduled instruction occurs before the scheduled Phi, and the |
3409 | // Phi is not loop carried. |
3410 | if (!InProlog && StagePhi + 1 == StageSched && |
3411 | !Schedule.isLoopCarried(this, *Phi)) |
3412 | ReplaceReg = NewReg; |
3413 | if (StagePhi > StageSched && Phi->isPHI()) |
3414 | ReplaceReg = NewReg; |
3415 | if (!InProlog && !Phi->isPHI() && StagePhi < StageSched) |
3416 | ReplaceReg = NewReg; |
3417 | if (ReplaceReg) { |
3418 | MRI.constrainRegClass(ReplaceReg, MRI.getRegClass(OldReg)); |
3419 | UseOp.setReg(ReplaceReg); |
3420 | } |
3421 | } |
3422 | } |
3423 | |
3424 | /// Check if we can change the instruction to use an offset value from the |
3425 | /// previous iteration. If so, return true and set the base and offset values |
3426 | /// so that we can rewrite the load, if necessary. |
3427 | /// v1 = Phi(v0, v3) |
3428 | /// v2 = load v1, 0 |
3429 | /// v3 = post_store v1, 4, x |
3430 | /// This function enables the load to be rewritten as v2 = load v3, 4. |
3431 | bool SwingSchedulerDAG::canUseLastOffsetValue(MachineInstr *MI, |
3432 | unsigned &BasePos, |
3433 | unsigned &OffsetPos, |
3434 | unsigned &NewBase, |
3435 | int64_t &Offset) { |
3436 | // Get the load instruction. |
3437 | if (TII->isPostIncrement(*MI)) |
3438 | return false; |
3439 | unsigned BasePosLd, OffsetPosLd; |
3440 | if (!TII->getBaseAndOffsetPosition(*MI, BasePosLd, OffsetPosLd)) |
3441 | return false; |
3442 | unsigned BaseReg = MI->getOperand(BasePosLd).getReg(); |
3443 | |
3444 | // Look for the Phi instruction. |
3445 | MachineRegisterInfo &MRI = MI->getMF()->getRegInfo(); |
3446 | MachineInstr *Phi = MRI.getVRegDef(BaseReg); |
3447 | if (!Phi || !Phi->isPHI()) |
3448 | return false; |
3449 | // Get the register defined in the loop block. |
3450 | unsigned PrevReg = getLoopPhiReg(*Phi, MI->getParent()); |
3451 | if (!PrevReg) |
3452 | return false; |
3453 | |
3454 | // Check for the post-increment load/store instruction. |
3455 | MachineInstr *PrevDef = MRI.getVRegDef(PrevReg); |
3456 | if (!PrevDef || PrevDef == MI) |
3457 | return false; |
3458 | |
3459 | if (!TII->isPostIncrement(*PrevDef)) |
3460 | return false; |
3461 | |
3462 | unsigned BasePos1 = 0, OffsetPos1 = 0; |
3463 | if (!TII->getBaseAndOffsetPosition(*PrevDef, BasePos1, OffsetPos1)) |
3464 | return false; |
3465 | |
3466 | // Make sure that the instructions do not access the same memory location in |
3467 | // the next iteration. |
3468 | int64_t LoadOffset = MI->getOperand(OffsetPosLd).getImm(); |
3469 | int64_t StoreOffset = PrevDef->getOperand(OffsetPos1).getImm(); |
3470 | MachineInstr *NewMI = MF.CloneMachineInstr(MI); |
3471 | NewMI->getOperand(OffsetPosLd).setImm(LoadOffset + StoreOffset); |
3472 | bool Disjoint = TII->areMemAccessesTriviallyDisjoint(*NewMI, *PrevDef); |
3473 | MF.DeleteMachineInstr(NewMI); |
3474 | if (!Disjoint) |
3475 | return false; |
3476 | |
3477 | // Set the return value once we determine that we return true. |
3478 | BasePos = BasePosLd; |
3479 | OffsetPos = OffsetPosLd; |
3480 | NewBase = PrevReg; |
3481 | Offset = StoreOffset; |
3482 | return true; |
3483 | } |
3484 | |
3485 | /// Apply changes to the instruction if needed. The changes are need |
3486 | /// to improve the scheduling and depend up on the final schedule. |
3487 | void SwingSchedulerDAG::applyInstrChange(MachineInstr *MI, |
3488 | SMSchedule &Schedule) { |
3489 | SUnit *SU = getSUnit(MI); |
3490 | DenseMap<SUnit *, std::pair<unsigned, int64_t>>::iterator It = |
3491 | InstrChanges.find(SU); |
3492 | if (It != InstrChanges.end()) { |
3493 | std::pair<unsigned, int64_t> RegAndOffset = It->second; |
3494 | unsigned BasePos, OffsetPos; |
3495 | if (!TII->getBaseAndOffsetPosition(*MI, BasePos, OffsetPos)) |
3496 | return; |
3497 | unsigned BaseReg = MI->getOperand(BasePos).getReg(); |
3498 | MachineInstr *LoopDef = findDefInLoop(BaseReg); |
3499 | int DefStageNum = Schedule.stageScheduled(getSUnit(LoopDef)); |
3500 | int DefCycleNum = Schedule.cycleScheduled(getSUnit(LoopDef)); |
3501 | int BaseStageNum = Schedule.stageScheduled(SU); |
3502 | int BaseCycleNum = Schedule.cycleScheduled(SU); |
3503 | if (BaseStageNum < DefStageNum) { |
3504 | MachineInstr *NewMI = MF.CloneMachineInstr(MI); |
3505 | int OffsetDiff = DefStageNum - BaseStageNum; |
3506 | if (DefCycleNum < BaseCycleNum) { |
3507 | NewMI->getOperand(BasePos).setReg(RegAndOffset.first); |
3508 | if (OffsetDiff > 0) |
3509 | --OffsetDiff; |
3510 | } |
3511 | int64_t NewOffset = |
3512 | MI->getOperand(OffsetPos).getImm() + RegAndOffset.second * OffsetDiff; |
3513 | NewMI->getOperand(OffsetPos).setImm(NewOffset); |
3514 | SU->setInstr(NewMI); |
3515 | MISUnitMap[NewMI] = SU; |
3516 | NewMIs.insert(NewMI); |
3517 | } |
3518 | } |
3519 | } |
3520 | |
3521 | /// Return true for an order or output dependence that is loop carried |
3522 | /// potentially. A dependence is loop carried if the destination defines a valu |
3523 | /// that may be used or defined by the source in a subsequent iteration. |
3524 | bool SwingSchedulerDAG::isLoopCarriedDep(SUnit *Source, const SDep &Dep, |
3525 | bool isSucc) { |
3526 | if ((Dep.getKind() != SDep::Order && Dep.getKind() != SDep::Output) || |
3527 | Dep.isArtificial()) |
3528 | return false; |
3529 | |
3530 | if (!SwpPruneLoopCarried) |
3531 | return true; |
3532 | |
3533 | if (Dep.getKind() == SDep::Output) |
3534 | return true; |
3535 | |
3536 | MachineInstr *SI = Source->getInstr(); |
3537 | MachineInstr *DI = Dep.getSUnit()->getInstr(); |
3538 | if (!isSucc) |
3539 | std::swap(SI, DI); |
3540 | assert(SI != nullptr && DI != nullptr && "Expecting SUnit with an MI.")(static_cast <bool> (SI != nullptr && DI != nullptr && "Expecting SUnit with an MI.") ? void (0) : __assert_fail ("SI != nullptr && DI != nullptr && \"Expecting SUnit with an MI.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3540, __extension__ __PRETTY_FUNCTION__)); |
3541 | |
3542 | // Assume ordered loads and stores may have a loop carried dependence. |
3543 | if (SI->hasUnmodeledSideEffects() || DI->hasUnmodeledSideEffects() || |
3544 | SI->hasOrderedMemoryRef() || DI->hasOrderedMemoryRef()) |
3545 | return true; |
3546 | |
3547 | // Only chain dependences between a load and store can be loop carried. |
3548 | if (!DI->mayStore() || !SI->mayLoad()) |
3549 | return false; |
3550 | |
3551 | unsigned DeltaS, DeltaD; |
3552 | if (!computeDelta(*SI, DeltaS) || !computeDelta(*DI, DeltaD)) |
3553 | return true; |
3554 | |
3555 | unsigned BaseRegS, BaseRegD; |
3556 | int64_t OffsetS, OffsetD; |
3557 | const TargetRegisterInfo *TRI = MF.getSubtarget().getRegisterInfo(); |
3558 | if (!TII->getMemOpBaseRegImmOfs(*SI, BaseRegS, OffsetS, TRI) || |
3559 | !TII->getMemOpBaseRegImmOfs(*DI, BaseRegD, OffsetD, TRI)) |
3560 | return true; |
3561 | |
3562 | if (BaseRegS != BaseRegD) |
3563 | return true; |
3564 | |
3565 | // Check that the base register is incremented by a constant value for each |
3566 | // iteration. |
3567 | MachineInstr *Def = MRI.getVRegDef(BaseRegS); |
3568 | if (!Def || !Def->isPHI()) |
3569 | return true; |
3570 | unsigned InitVal = 0; |
3571 | unsigned LoopVal = 0; |
3572 | getPhiRegs(*Def, BB, InitVal, LoopVal); |
3573 | MachineInstr *LoopDef = MRI.getVRegDef(LoopVal); |
3574 | int D = 0; |
3575 | if (!LoopDef || !TII->getIncrementValue(*LoopDef, D)) |
3576 | return true; |
3577 | |
3578 | uint64_t AccessSizeS = (*SI->memoperands_begin())->getSize(); |
3579 | uint64_t AccessSizeD = (*DI->memoperands_begin())->getSize(); |
3580 | |
3581 | // This is the main test, which checks the offset values and the loop |
3582 | // increment value to determine if the accesses may be loop carried. |
3583 | if (OffsetS >= OffsetD) |
3584 | return OffsetS + AccessSizeS > DeltaS; |
3585 | else |
3586 | return OffsetD + AccessSizeD > DeltaD; |
3587 | |
3588 | return true; |
3589 | } |
3590 | |
3591 | void SwingSchedulerDAG::postprocessDAG() { |
3592 | for (auto &M : Mutations) |
3593 | M->apply(this); |
3594 | } |
3595 | |
3596 | /// Try to schedule the node at the specified StartCycle and continue |
3597 | /// until the node is schedule or the EndCycle is reached. This function |
3598 | /// returns true if the node is scheduled. This routine may search either |
3599 | /// forward or backward for a place to insert the instruction based upon |
3600 | /// the relative values of StartCycle and EndCycle. |
3601 | bool SMSchedule::insert(SUnit *SU, int StartCycle, int EndCycle, int II) { |
3602 | bool forward = true; |
3603 | if (StartCycle > EndCycle) |
3604 | forward = false; |
3605 | |
3606 | // The terminating condition depends on the direction. |
3607 | int termCycle = forward ? EndCycle + 1 : EndCycle - 1; |
3608 | for (int curCycle = StartCycle; curCycle != termCycle; |
3609 | forward ? ++curCycle : --curCycle) { |
3610 | |
3611 | // Add the already scheduled instructions at the specified cycle to the DFA. |
3612 | Resources->clearResources(); |
3613 | for (int checkCycle = FirstCycle + ((curCycle - FirstCycle) % II); |
3614 | checkCycle <= LastCycle; checkCycle += II) { |
3615 | std::deque<SUnit *> &cycleInstrs = ScheduledInstrs[checkCycle]; |
3616 | |
3617 | for (std::deque<SUnit *>::iterator I = cycleInstrs.begin(), |
3618 | E = cycleInstrs.end(); |
3619 | I != E; ++I) { |
3620 | if (ST.getInstrInfo()->isZeroCost((*I)->getInstr()->getOpcode())) |
3621 | continue; |
3622 | assert(Resources->canReserveResources(*(*I)->getInstr()) &&(static_cast <bool> (Resources->canReserveResources( *(*I)->getInstr()) && "These instructions have already been scheduled." ) ? void (0) : __assert_fail ("Resources->canReserveResources(*(*I)->getInstr()) && \"These instructions have already been scheduled.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3623, __extension__ __PRETTY_FUNCTION__)) |
3623 | "These instructions have already been scheduled.")(static_cast <bool> (Resources->canReserveResources( *(*I)->getInstr()) && "These instructions have already been scheduled." ) ? void (0) : __assert_fail ("Resources->canReserveResources(*(*I)->getInstr()) && \"These instructions have already been scheduled.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3623, __extension__ __PRETTY_FUNCTION__)); |
3624 | Resources->reserveResources(*(*I)->getInstr()); |
3625 | } |
3626 | } |
3627 | if (ST.getInstrInfo()->isZeroCost(SU->getInstr()->getOpcode()) || |
3628 | Resources->canReserveResources(*SU->getInstr())) { |
3629 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tinsert at cycle " << curCycle << " "; SU->getInstr()->dump(); }; } } while (false) |
3630 | dbgs() << "\tinsert at cycle " << curCycle << " ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tinsert at cycle " << curCycle << " "; SU->getInstr()->dump(); }; } } while (false) |
3631 | SU->getInstr()->dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tinsert at cycle " << curCycle << " "; SU->getInstr()->dump(); }; } } while (false) |
3632 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tinsert at cycle " << curCycle << " "; SU->getInstr()->dump(); }; } } while (false); |
3633 | |
3634 | ScheduledInstrs[curCycle].push_back(SU); |
3635 | InstrToCycle.insert(std::make_pair(SU, curCycle)); |
3636 | if (curCycle > LastCycle) |
3637 | LastCycle = curCycle; |
3638 | if (curCycle < FirstCycle) |
3639 | FirstCycle = curCycle; |
3640 | return true; |
3641 | } |
3642 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tfailed to insert at cycle " << curCycle << " "; SU->getInstr()->dump() ; }; } } while (false) |
3643 | dbgs() << "\tfailed to insert at cycle " << curCycle << " ";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tfailed to insert at cycle " << curCycle << " "; SU->getInstr()->dump() ; }; } } while (false) |
3644 | SU->getInstr()->dump();do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tfailed to insert at cycle " << curCycle << " "; SU->getInstr()->dump() ; }; } } while (false) |
3645 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { dbgs() << "\tfailed to insert at cycle " << curCycle << " "; SU->getInstr()->dump() ; }; } } while (false); |
3646 | } |
3647 | return false; |
3648 | } |
3649 | |
3650 | // Return the cycle of the earliest scheduled instruction in the chain. |
3651 | int SMSchedule::earliestCycleInChain(const SDep &Dep) { |
3652 | SmallPtrSet<SUnit *, 8> Visited; |
3653 | SmallVector<SDep, 8> Worklist; |
3654 | Worklist.push_back(Dep); |
3655 | int EarlyCycle = INT_MAX2147483647; |
3656 | while (!Worklist.empty()) { |
3657 | const SDep &Cur = Worklist.pop_back_val(); |
3658 | SUnit *PrevSU = Cur.getSUnit(); |
3659 | if (Visited.count(PrevSU)) |
3660 | continue; |
3661 | std::map<SUnit *, int>::const_iterator it = InstrToCycle.find(PrevSU); |
3662 | if (it == InstrToCycle.end()) |
3663 | continue; |
3664 | EarlyCycle = std::min(EarlyCycle, it->second); |
3665 | for (const auto &PI : PrevSU->Preds) |
3666 | if (PI.getKind() == SDep::Order || Dep.getKind() == SDep::Output) |
3667 | Worklist.push_back(PI); |
3668 | Visited.insert(PrevSU); |
3669 | } |
3670 | return EarlyCycle; |
3671 | } |
3672 | |
3673 | // Return the cycle of the latest scheduled instruction in the chain. |
3674 | int SMSchedule::latestCycleInChain(const SDep &Dep) { |
3675 | SmallPtrSet<SUnit *, 8> Visited; |
3676 | SmallVector<SDep, 8> Worklist; |
3677 | Worklist.push_back(Dep); |
3678 | int LateCycle = INT_MIN(-2147483647 -1); |
3679 | while (!Worklist.empty()) { |
3680 | const SDep &Cur = Worklist.pop_back_val(); |
3681 | SUnit *SuccSU = Cur.getSUnit(); |
3682 | if (Visited.count(SuccSU)) |
3683 | continue; |
3684 | std::map<SUnit *, int>::const_iterator it = InstrToCycle.find(SuccSU); |
3685 | if (it == InstrToCycle.end()) |
3686 | continue; |
3687 | LateCycle = std::max(LateCycle, it->second); |
3688 | for (const auto &SI : SuccSU->Succs) |
3689 | if (SI.getKind() == SDep::Order || Dep.getKind() == SDep::Output) |
3690 | Worklist.push_back(SI); |
3691 | Visited.insert(SuccSU); |
3692 | } |
3693 | return LateCycle; |
3694 | } |
3695 | |
3696 | /// If an instruction has a use that spans multiple iterations, then |
3697 | /// return true. These instructions are characterized by having a back-ege |
3698 | /// to a Phi, which contains a reference to another Phi. |
3699 | static SUnit *multipleIterations(SUnit *SU, SwingSchedulerDAG *DAG) { |
3700 | for (auto &P : SU->Preds) |
3701 | if (DAG->isBackedge(SU, P) && P.getSUnit()->getInstr()->isPHI()) |
3702 | for (auto &S : P.getSUnit()->Succs) |
3703 | if (S.getKind() == SDep::Data && S.getSUnit()->getInstr()->isPHI()) |
3704 | return P.getSUnit(); |
3705 | return nullptr; |
3706 | } |
3707 | |
3708 | /// Compute the scheduling start slot for the instruction. The start slot |
3709 | /// depends on any predecessor or successor nodes scheduled already. |
3710 | void SMSchedule::computeStart(SUnit *SU, int *MaxEarlyStart, int *MinLateStart, |
3711 | int *MinEnd, int *MaxStart, int II, |
3712 | SwingSchedulerDAG *DAG) { |
3713 | // Iterate over each instruction that has been scheduled already. The start |
3714 | // slot computation depends on whether the previously scheduled instruction |
3715 | // is a predecessor or successor of the specified instruction. |
3716 | for (int cycle = getFirstCycle(); cycle <= LastCycle; ++cycle) { |
3717 | |
3718 | // Iterate over each instruction in the current cycle. |
3719 | for (SUnit *I : getInstructions(cycle)) { |
3720 | // Because we're processing a DAG for the dependences, we recognize |
3721 | // the back-edge in recurrences by anti dependences. |
3722 | for (unsigned i = 0, e = (unsigned)SU->Preds.size(); i != e; ++i) { |
3723 | const SDep &Dep = SU->Preds[i]; |
3724 | if (Dep.getSUnit() == I) { |
3725 | if (!DAG->isBackedge(SU, Dep)) { |
3726 | int EarlyStart = cycle + Dep.getLatency() - |
3727 | DAG->getDistance(Dep.getSUnit(), SU, Dep) * II; |
3728 | *MaxEarlyStart = std::max(*MaxEarlyStart, EarlyStart); |
3729 | if (DAG->isLoopCarriedDep(SU, Dep, false)) { |
3730 | int End = earliestCycleInChain(Dep) + (II - 1); |
3731 | *MinEnd = std::min(*MinEnd, End); |
3732 | } |
3733 | } else { |
3734 | int LateStart = cycle - Dep.getLatency() + |
3735 | DAG->getDistance(SU, Dep.getSUnit(), Dep) * II; |
3736 | *MinLateStart = std::min(*MinLateStart, LateStart); |
3737 | } |
3738 | } |
3739 | // For instruction that requires multiple iterations, make sure that |
3740 | // the dependent instruction is not scheduled past the definition. |
3741 | SUnit *BE = multipleIterations(I, DAG); |
3742 | if (BE && Dep.getSUnit() == BE && !SU->getInstr()->isPHI() && |
3743 | !SU->isPred(I)) |
3744 | *MinLateStart = std::min(*MinLateStart, cycle); |
3745 | } |
3746 | for (unsigned i = 0, e = (unsigned)SU->Succs.size(); i != e; ++i) { |
3747 | if (SU->Succs[i].getSUnit() == I) { |
3748 | const SDep &Dep = SU->Succs[i]; |
3749 | if (!DAG->isBackedge(SU, Dep)) { |
3750 | int LateStart = cycle - Dep.getLatency() + |
3751 | DAG->getDistance(SU, Dep.getSUnit(), Dep) * II; |
3752 | *MinLateStart = std::min(*MinLateStart, LateStart); |
3753 | if (DAG->isLoopCarriedDep(SU, Dep)) { |
3754 | int Start = latestCycleInChain(Dep) + 1 - II; |
3755 | *MaxStart = std::max(*MaxStart, Start); |
3756 | } |
3757 | } else { |
3758 | int EarlyStart = cycle + Dep.getLatency() - |
3759 | DAG->getDistance(Dep.getSUnit(), SU, Dep) * II; |
3760 | *MaxEarlyStart = std::max(*MaxEarlyStart, EarlyStart); |
3761 | } |
3762 | } |
3763 | } |
3764 | } |
3765 | } |
3766 | } |
3767 | |
3768 | /// Order the instructions within a cycle so that the definitions occur |
3769 | /// before the uses. Returns true if the instruction is added to the start |
3770 | /// of the list, or false if added to the end. |
3771 | void SMSchedule::orderDependence(SwingSchedulerDAG *SSD, SUnit *SU, |
3772 | std::deque<SUnit *> &Insts) { |
3773 | MachineInstr *MI = SU->getInstr(); |
3774 | bool OrderBeforeUse = false; |
3775 | bool OrderAfterDef = false; |
3776 | bool OrderBeforeDef = false; |
3777 | unsigned MoveDef = 0; |
3778 | unsigned MoveUse = 0; |
3779 | int StageInst1 = stageScheduled(SU); |
3780 | |
3781 | unsigned Pos = 0; |
3782 | for (std::deque<SUnit *>::iterator I = Insts.begin(), E = Insts.end(); I != E; |
3783 | ++I, ++Pos) { |
3784 | for (unsigned i = 0, e = MI->getNumOperands(); i < e; ++i) { |
3785 | MachineOperand &MO = MI->getOperand(i); |
3786 | if (!MO.isReg() || !TargetRegisterInfo::isVirtualRegister(MO.getReg())) |
3787 | continue; |
3788 | |
3789 | unsigned Reg = MO.getReg(); |
3790 | unsigned BasePos, OffsetPos; |
3791 | if (ST.getInstrInfo()->getBaseAndOffsetPosition(*MI, BasePos, OffsetPos)) |
3792 | if (MI->getOperand(BasePos).getReg() == Reg) |
3793 | if (unsigned NewReg = SSD->getInstrBaseReg(SU)) |
3794 | Reg = NewReg; |
3795 | bool Reads, Writes; |
3796 | std::tie(Reads, Writes) = |
3797 | (*I)->getInstr()->readsWritesVirtualRegister(Reg); |
3798 | if (MO.isDef() && Reads && stageScheduled(*I) <= StageInst1) { |
3799 | OrderBeforeUse = true; |
3800 | if (MoveUse == 0) |
3801 | MoveUse = Pos; |
3802 | } else if (MO.isDef() && Reads && stageScheduled(*I) > StageInst1) { |
3803 | // Add the instruction after the scheduled instruction. |
3804 | OrderAfterDef = true; |
3805 | MoveDef = Pos; |
3806 | } else if (MO.isUse() && Writes && stageScheduled(*I) == StageInst1) { |
3807 | if (cycleScheduled(*I) == cycleScheduled(SU) && !(*I)->isSucc(SU)) { |
3808 | OrderBeforeUse = true; |
3809 | if (MoveUse == 0) |
3810 | MoveUse = Pos; |
3811 | } else { |
3812 | OrderAfterDef = true; |
3813 | MoveDef = Pos; |
3814 | } |
3815 | } else if (MO.isUse() && Writes && stageScheduled(*I) > StageInst1) { |
3816 | OrderBeforeUse = true; |
3817 | if (MoveUse == 0) |
3818 | MoveUse = Pos; |
3819 | if (MoveUse != 0) { |
3820 | OrderAfterDef = true; |
3821 | MoveDef = Pos - 1; |
3822 | } |
3823 | } else if (MO.isUse() && Writes && stageScheduled(*I) < StageInst1) { |
3824 | // Add the instruction before the scheduled instruction. |
3825 | OrderBeforeUse = true; |
3826 | if (MoveUse == 0) |
3827 | MoveUse = Pos; |
3828 | } else if (MO.isUse() && stageScheduled(*I) == StageInst1 && |
3829 | isLoopCarriedDefOfUse(SSD, (*I)->getInstr(), MO)) { |
3830 | if (MoveUse == 0) { |
3831 | OrderBeforeDef = true; |
3832 | MoveUse = Pos; |
3833 | } |
3834 | } |
3835 | } |
3836 | // Check for order dependences between instructions. Make sure the source |
3837 | // is ordered before the destination. |
3838 | for (auto &S : SU->Succs) { |
3839 | if (S.getSUnit() != *I) |
3840 | continue; |
3841 | if (S.getKind() == SDep::Order && stageScheduled(*I) == StageInst1) { |
3842 | OrderBeforeUse = true; |
3843 | if (Pos < MoveUse) |
3844 | MoveUse = Pos; |
3845 | } |
3846 | } |
3847 | for (auto &P : SU->Preds) { |
3848 | if (P.getSUnit() != *I) |
3849 | continue; |
3850 | if (P.getKind() == SDep::Order && stageScheduled(*I) == StageInst1) { |
3851 | OrderAfterDef = true; |
3852 | MoveDef = Pos; |
3853 | } |
3854 | } |
3855 | } |
3856 | |
3857 | // A circular dependence. |
3858 | if (OrderAfterDef && OrderBeforeUse && MoveUse == MoveDef) |
3859 | OrderBeforeUse = false; |
3860 | |
3861 | // OrderAfterDef takes precedences over OrderBeforeDef. The latter is due |
3862 | // to a loop-carried dependence. |
3863 | if (OrderBeforeDef) |
3864 | OrderBeforeUse = !OrderAfterDef || (MoveUse > MoveDef); |
3865 | |
3866 | // The uncommon case when the instruction order needs to be updated because |
3867 | // there is both a use and def. |
3868 | if (OrderBeforeUse && OrderAfterDef) { |
3869 | SUnit *UseSU = Insts.at(MoveUse); |
3870 | SUnit *DefSU = Insts.at(MoveDef); |
3871 | if (MoveUse > MoveDef) { |
3872 | Insts.erase(Insts.begin() + MoveUse); |
3873 | Insts.erase(Insts.begin() + MoveDef); |
3874 | } else { |
3875 | Insts.erase(Insts.begin() + MoveDef); |
3876 | Insts.erase(Insts.begin() + MoveUse); |
3877 | } |
3878 | orderDependence(SSD, UseSU, Insts); |
3879 | orderDependence(SSD, SU, Insts); |
3880 | orderDependence(SSD, DefSU, Insts); |
3881 | return; |
3882 | } |
3883 | // Put the new instruction first if there is a use in the list. Otherwise, |
3884 | // put it at the end of the list. |
3885 | if (OrderBeforeUse) |
3886 | Insts.push_front(SU); |
3887 | else |
3888 | Insts.push_back(SU); |
3889 | } |
3890 | |
3891 | /// Return true if the scheduled Phi has a loop carried operand. |
3892 | bool SMSchedule::isLoopCarried(SwingSchedulerDAG *SSD, MachineInstr &Phi) { |
3893 | if (!Phi.isPHI()) |
3894 | return false; |
3895 | assert(Phi.isPHI() && "Expecting a Phi.")(static_cast <bool> (Phi.isPHI() && "Expecting a Phi." ) ? void (0) : __assert_fail ("Phi.isPHI() && \"Expecting a Phi.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3895, __extension__ __PRETTY_FUNCTION__)); |
3896 | SUnit *DefSU = SSD->getSUnit(&Phi); |
3897 | unsigned DefCycle = cycleScheduled(DefSU); |
3898 | int DefStage = stageScheduled(DefSU); |
3899 | |
3900 | unsigned InitVal = 0; |
3901 | unsigned LoopVal = 0; |
3902 | getPhiRegs(Phi, Phi.getParent(), InitVal, LoopVal); |
3903 | SUnit *UseSU = SSD->getSUnit(MRI.getVRegDef(LoopVal)); |
3904 | if (!UseSU) |
3905 | return true; |
3906 | if (UseSU->getInstr()->isPHI()) |
3907 | return true; |
3908 | unsigned LoopCycle = cycleScheduled(UseSU); |
3909 | int LoopStage = stageScheduled(UseSU); |
3910 | return (LoopCycle > DefCycle) || (LoopStage <= DefStage); |
3911 | } |
3912 | |
3913 | /// Return true if the instruction is a definition that is loop carried |
3914 | /// and defines the use on the next iteration. |
3915 | /// v1 = phi(v2, v3) |
3916 | /// (Def) v3 = op v1 |
3917 | /// (MO) = v1 |
3918 | /// If MO appears before Def, then then v1 and v3 may get assigned to the same |
3919 | /// register. |
3920 | bool SMSchedule::isLoopCarriedDefOfUse(SwingSchedulerDAG *SSD, |
3921 | MachineInstr *Def, MachineOperand &MO) { |
3922 | if (!MO.isReg()) |
3923 | return false; |
3924 | if (Def->isPHI()) |
3925 | return false; |
3926 | MachineInstr *Phi = MRI.getVRegDef(MO.getReg()); |
3927 | if (!Phi || !Phi->isPHI() || Phi->getParent() != Def->getParent()) |
3928 | return false; |
3929 | if (!isLoopCarried(SSD, *Phi)) |
3930 | return false; |
3931 | unsigned LoopReg = getLoopPhiReg(*Phi, Phi->getParent()); |
3932 | for (unsigned i = 0, e = Def->getNumOperands(); i != e; ++i) { |
3933 | MachineOperand &DMO = Def->getOperand(i); |
3934 | if (!DMO.isReg() || !DMO.isDef()) |
3935 | continue; |
3936 | if (DMO.getReg() == LoopReg) |
3937 | return true; |
3938 | } |
3939 | return false; |
3940 | } |
3941 | |
3942 | // Check if the generated schedule is valid. This function checks if |
3943 | // an instruction that uses a physical register is scheduled in a |
3944 | // different stage than the definition. The pipeliner does not handle |
3945 | // physical register values that may cross a basic block boundary. |
3946 | bool SMSchedule::isValidSchedule(SwingSchedulerDAG *SSD) { |
3947 | for (int i = 0, e = SSD->SUnits.size(); i < e; ++i) { |
3948 | SUnit &SU = SSD->SUnits[i]; |
3949 | if (!SU.hasPhysRegDefs) |
3950 | continue; |
3951 | int StageDef = stageScheduled(&SU); |
3952 | assert(StageDef != -1 && "Instruction should have been scheduled.")(static_cast <bool> (StageDef != -1 && "Instruction should have been scheduled." ) ? void (0) : __assert_fail ("StageDef != -1 && \"Instruction should have been scheduled.\"" , "/build/llvm-toolchain-snapshot-7~svn338205/lib/CodeGen/MachinePipeliner.cpp" , 3952, __extension__ __PRETTY_FUNCTION__)); |
3953 | for (auto &SI : SU.Succs) |
3954 | if (SI.isAssignedRegDep()) |
3955 | if (ST.getRegisterInfo()->isPhysicalRegister(SI.getReg())) |
3956 | if (stageScheduled(SI.getSUnit()) != StageDef) |
3957 | return false; |
3958 | } |
3959 | return true; |
3960 | } |
3961 | |
3962 | /// A property of the node order in swing-modulo-scheduling is |
3963 | /// that for nodes outside circuits the following holds: |
3964 | /// none of them is scheduled after both a successor and a |
3965 | /// predecessor. |
3966 | /// The method below checks whether the property is met. |
3967 | /// If not, debug information is printed and statistics information updated. |
3968 | /// Note that we do not use an assert statement. |
3969 | /// The reason is that although an invalid node oder may prevent |
3970 | /// the pipeliner from finding a pipelined schedule for arbitrary II, |
3971 | /// it does not lead to the generation of incorrect code. |
3972 | void SwingSchedulerDAG::checkValidNodeOrder(const NodeSetType &Circuits) const { |
3973 | |
3974 | // a sorted vector that maps each SUnit to its index in the NodeOrder |
3975 | typedef std::pair<SUnit *, unsigned> UnitIndex; |
3976 | std::vector<UnitIndex> Indices(NodeOrder.size(), std::make_pair(nullptr, 0)); |
3977 | |
3978 | for (unsigned i = 0, s = NodeOrder.size(); i < s; ++i) |
3979 | Indices.push_back(std::make_pair(NodeOrder[i], i)); |
3980 | |
3981 | auto CompareKey = [](UnitIndex i1, UnitIndex i2) { |
3982 | return std::get<0>(i1) < std::get<0>(i2); |
3983 | }; |
3984 | |
3985 | // sort, so that we can perform a binary search |
3986 | llvm::sort(Indices.begin(), Indices.end(), CompareKey); |
3987 | |
3988 | bool Valid = true; |
3989 | (void)Valid; |
3990 | // for each SUnit in the NodeOrder, check whether |
3991 | // it appears after both a successor and a predecessor |
3992 | // of the SUnit. If this is the case, and the SUnit |
3993 | // is not part of circuit, then the NodeOrder is not |
3994 | // valid. |
3995 | for (unsigned i = 0, s = NodeOrder.size(); i < s; ++i) { |
3996 | SUnit *SU = NodeOrder[i]; |
3997 | unsigned Index = i; |
3998 | |
3999 | bool PredBefore = false; |
4000 | bool SuccBefore = false; |
4001 | |
4002 | SUnit *Succ; |
4003 | SUnit *Pred; |
4004 | (void)Succ; |
4005 | (void)Pred; |
4006 | |
4007 | for (SDep &PredEdge : SU->Preds) { |
4008 | SUnit *PredSU = PredEdge.getSUnit(); |
4009 | unsigned PredIndex = |
4010 | std::get<1>(*std::lower_bound(Indices.begin(), Indices.end(), |
4011 | std::make_pair(PredSU, 0), CompareKey)); |
4012 | if (!PredSU->getInstr()->isPHI() && PredIndex < Index) { |
4013 | PredBefore = true; |
4014 | Pred = PredSU; |
4015 | break; |
4016 | } |
4017 | } |
4018 | |
4019 | for (SDep &SuccEdge : SU->Succs) { |
4020 | SUnit *SuccSU = SuccEdge.getSUnit(); |
4021 | unsigned SuccIndex = |
4022 | std::get<1>(*std::lower_bound(Indices.begin(), Indices.end(), |
4023 | std::make_pair(SuccSU, 0), CompareKey)); |
4024 | if (!SuccSU->getInstr()->isPHI() && SuccIndex < Index) { |
4025 | SuccBefore = true; |
4026 | Succ = SuccSU; |
4027 | break; |
4028 | } |
4029 | } |
4030 | |
4031 | if (PredBefore && SuccBefore && !SU->getInstr()->isPHI()) { |
4032 | // instructions in circuits are allowed to be scheduled |
4033 | // after both a successor and predecessor. |
4034 | bool InCircuit = std::any_of( |
4035 | Circuits.begin(), Circuits.end(), |
4036 | [SU](const NodeSet &Circuit) { return Circuit.count(SU); }); |
4037 | if (InCircuit) |
4038 | LLVM_DEBUG(dbgs() << "In a circuit, predecessor ";)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "In a circuit, predecessor " ;; } } while (false); |
4039 | else { |
4040 | Valid = false; |
4041 | NumNodeOrderIssues++; |
4042 | LLVM_DEBUG(dbgs() << "Predecessor ";)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << "Predecessor ";; } } while ( false); |
4043 | } |
4044 | LLVM_DEBUG(dbgs() << Pred->NodeNum << " and successor " << Succ->NodeNumdo { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << Pred->NodeNum << " and successor " << Succ->NodeNum << " are scheduled before node " << SU->NodeNum << "\n";; } } while (false) |
4045 | << " are scheduled before node " << SU->NodeNumdo { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << Pred->NodeNum << " and successor " << Succ->NodeNum << " are scheduled before node " << SU->NodeNum << "\n";; } } while (false) |
4046 | << "\n";)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dbgs() << Pred->NodeNum << " and successor " << Succ->NodeNum << " are scheduled before node " << SU->NodeNum << "\n";; } } while (false); |
4047 | } |
4048 | } |
4049 | |
4050 | LLVM_DEBUG({do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!Valid) dbgs() << "Invalid node order found!\n" ; }; } } while (false) |
4051 | if (!Valid)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!Valid) dbgs() << "Invalid node order found!\n" ; }; } } while (false) |
4052 | dbgs() << "Invalid node order found!\n";do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!Valid) dbgs() << "Invalid node order found!\n" ; }; } } while (false) |
4053 | })do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { { if (!Valid) dbgs() << "Invalid node order found!\n" ; }; } } while (false); |
4054 | } |
4055 | |
4056 | /// Attempt to fix the degenerate cases when the instruction serialization |
4057 | /// causes the register lifetimes to overlap. For example, |
4058 | /// p' = store_pi(p, b) |
4059 | /// = load p, offset |
4060 | /// In this case p and p' overlap, which means that two registers are needed. |
4061 | /// Instead, this function changes the load to use p' and updates the offset. |
4062 | void SwingSchedulerDAG::fixupRegisterOverlaps(std::deque<SUnit *> &Instrs) { |
4063 | unsigned OverlapReg = 0; |
4064 | unsigned NewBaseReg = 0; |
4065 | for (SUnit *SU : Instrs) { |
4066 | MachineInstr *MI = SU->getInstr(); |
4067 | for (unsigned i = 0, e = MI->getNumOperands(); i < e; ++i) { |
4068 | const MachineOperand &MO = MI->getOperand(i); |
4069 | // Look for an instruction that uses p. The instruction occurs in the |
4070 | // same cycle but occurs later in the serialized order. |
4071 | if (MO.isReg() && MO.isUse() && MO.getReg() == OverlapReg) { |
4072 | // Check that the instruction appears in the InstrChanges structure, |
4073 | // which contains instructions that can have the offset updated. |
4074 | DenseMap<SUnit *, std::pair<unsigned, int64_t>>::iterator It = |
4075 | InstrChanges.find(SU); |
4076 | if (It != InstrChanges.end()) { |
4077 | unsigned BasePos, OffsetPos; |
4078 | // Update the base register and adjust the offset. |
4079 | if (TII->getBaseAndOffsetPosition(*MI, BasePos, OffsetPos)) { |
4080 | MachineInstr *NewMI = MF.CloneMachineInstr(MI); |
4081 | NewMI->getOperand(BasePos).setReg(NewBaseReg); |
4082 | int64_t NewOffset = |
4083 | MI->getOperand(OffsetPos).getImm() - It->second.second; |
4084 | NewMI->getOperand(OffsetPos).setImm(NewOffset); |
4085 | SU->setInstr(NewMI); |
4086 | MISUnitMap[NewMI] = SU; |
4087 | NewMIs.insert(NewMI); |
4088 | } |
4089 | } |
4090 | OverlapReg = 0; |
4091 | NewBaseReg = 0; |
4092 | break; |
4093 | } |
4094 | // Look for an instruction of the form p' = op(p), which uses and defines |
4095 | // two virtual registers that get allocated to the same physical register. |
4096 | unsigned TiedUseIdx = 0; |
4097 | if (MI->isRegTiedToUseOperand(i, &TiedUseIdx)) { |
4098 | // OverlapReg is p in the example above. |
4099 | OverlapReg = MI->getOperand(TiedUseIdx).getReg(); |
4100 | // NewBaseReg is p' in the example above. |
4101 | NewBaseReg = MI->getOperand(i).getReg(); |
4102 | break; |
4103 | } |
4104 | } |
4105 | } |
4106 | } |
4107 | |
4108 | /// After the schedule has been formed, call this function to combine |
4109 | /// the instructions from the different stages/cycles. That is, this |
4110 | /// function creates a schedule that represents a single iteration. |
4111 | void SMSchedule::finalizeSchedule(SwingSchedulerDAG *SSD) { |
4112 | // Move all instructions to the first stage from later stages. |
4113 | for (int cycle = getFirstCycle(); cycle <= getFinalCycle(); ++cycle) { |
4114 | for (int stage = 1, lastStage = getMaxStageCount(); stage <= lastStage; |
4115 | ++stage) { |
4116 | std::deque<SUnit *> &cycleInstrs = |
4117 | ScheduledInstrs[cycle + (stage * InitiationInterval)]; |
4118 | for (std::deque<SUnit *>::reverse_iterator I = cycleInstrs.rbegin(), |
4119 | E = cycleInstrs.rend(); |
4120 | I != E; ++I) |
4121 | ScheduledInstrs[cycle].push_front(*I); |
4122 | } |
4123 | } |
4124 | // Iterate over the definitions in each instruction, and compute the |
4125 | // stage difference for each use. Keep the maximum value. |
4126 | for (auto &I : InstrToCycle) { |
4127 | int DefStage = stageScheduled(I.first); |
4128 | MachineInstr *MI = I.first->getInstr(); |
4129 | for (unsigned i = 0, e = MI->getNumOperands(); i < e; ++i) { |
4130 | MachineOperand &Op = MI->getOperand(i); |
4131 | if (!Op.isReg() || !Op.isDef()) |
4132 | continue; |
4133 | |
4134 | unsigned Reg = Op.getReg(); |
4135 | unsigned MaxDiff = 0; |
4136 | bool PhiIsSwapped = false; |
4137 | for (MachineRegisterInfo::use_iterator UI = MRI.use_begin(Reg), |
4138 | EI = MRI.use_end(); |
4139 | UI != EI; ++UI) { |
4140 | MachineOperand &UseOp = *UI; |
4141 | MachineInstr *UseMI = UseOp.getParent(); |
4142 | SUnit *SUnitUse = SSD->getSUnit(UseMI); |
4143 | int UseStage = stageScheduled(SUnitUse); |
4144 | unsigned Diff = 0; |
4145 | if (UseStage != -1 && UseStage >= DefStage) |
4146 | Diff = UseStage - DefStage; |
4147 | if (MI->isPHI()) { |
4148 | if (isLoopCarried(SSD, *MI)) |
4149 | ++Diff; |
4150 | else |
4151 | PhiIsSwapped = true; |
4152 | } |
4153 | MaxDiff = std::max(Diff, MaxDiff); |
4154 | } |
4155 | RegToStageDiff[Reg] = std::make_pair(MaxDiff, PhiIsSwapped); |
4156 | } |
4157 | } |
4158 | |
4159 | // Erase all the elements in the later stages. Only one iteration should |
4160 | // remain in the scheduled list, and it contains all the instructions. |
4161 | for (int cycle = getFinalCycle() + 1; cycle <= LastCycle; ++cycle) |
4162 | ScheduledInstrs.erase(cycle); |
4163 | |
4164 | // Change the registers in instruction as specified in the InstrChanges |
4165 | // map. We need to use the new registers to create the correct order. |
4166 | for (int i = 0, e = SSD->SUnits.size(); i != e; ++i) { |
4167 | SUnit *SU = &SSD->SUnits[i]; |
4168 | SSD->applyInstrChange(SU->getInstr(), *this); |
4169 | } |
4170 | |
4171 | // Reorder the instructions in each cycle to fix and improve the |
4172 | // generated code. |
4173 | for (int Cycle = getFirstCycle(), E = getFinalCycle(); Cycle <= E; ++Cycle) { |
4174 | std::deque<SUnit *> &cycleInstrs = ScheduledInstrs[Cycle]; |
4175 | std::deque<SUnit *> newOrderPhi; |
4176 | for (unsigned i = 0, e = cycleInstrs.size(); i < e; ++i) { |
4177 | SUnit *SU = cycleInstrs[i]; |
4178 | if (SU->getInstr()->isPHI()) |
4179 | newOrderPhi.push_back(SU); |
4180 | } |
4181 | std::deque<SUnit *> newOrderI; |
4182 | for (unsigned i = 0, e = cycleInstrs.size(); i < e; ++i) { |
4183 | SUnit *SU = cycleInstrs[i]; |
4184 | if (!SU->getInstr()->isPHI()) |
4185 | orderDependence(SSD, SU, newOrderI); |
4186 | } |
4187 | // Replace the old order with the new order. |
4188 | cycleInstrs.swap(newOrderPhi); |
4189 | cycleInstrs.insert(cycleInstrs.end(), newOrderI.begin(), newOrderI.end()); |
4190 | SSD->fixupRegisterOverlaps(cycleInstrs); |
4191 | } |
4192 | |
4193 | LLVM_DEBUG(dump();)do { if (::llvm::DebugFlag && ::llvm::isCurrentDebugType ("pipeliner")) { dump();; } } while (false); |
4194 | } |
4195 | |
4196 | #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) |
4197 | /// Print the schedule information to the given output. |
4198 | void SMSchedule::print(raw_ostream &os) const { |
4199 | // Iterate over each cycle. |
4200 | for (int cycle = getFirstCycle(); cycle <= getFinalCycle(); ++cycle) { |
4201 | // Iterate over each instruction in the cycle. |
4202 | const_sched_iterator cycleInstrs = ScheduledInstrs.find(cycle); |
4203 | for (SUnit *CI : cycleInstrs->second) { |
4204 | os << "cycle " << cycle << " (" << stageScheduled(CI) << ") "; |
4205 | os << "(" << CI->NodeNum << ") "; |
4206 | CI->getInstr()->print(os); |
4207 | os << "\n"; |
4208 | } |
4209 | } |
4210 | } |
4211 | |
4212 | /// Utility function used for debugging to print the schedule. |
4213 | LLVM_DUMP_METHOD__attribute__((noinline)) __attribute__((__used__)) void SMSchedule::dump() const { print(dbgs()); } |
4214 | #endif |